evilution.co.uk/mod/450-heater-control-cables.htm

1 excerpts.

450 Heater Control Cables

evilution.co.uk/mod/450-heater-control-cables.htm · p. 1 · Applies to: 450

Mod Description How to check the heater control cables, make sure they are fitted correctly and not damaged. Mod Details Premium Yes Difficulty Mod ID 1061 Credit evilution For Link https://evilution.co.uk/mod/450-heater-control-cables.htm Copy to Clipboard Stiff Or Springy Levers If part of the travel of one of the control levers feels stiff or bounces back when pushed, extend the cable out as far as it’ll go and visually check it at both ends. Ensure that the cable isn’t kinked, bent or making contact on something it shouldn’t. If the heat control lever doesn’t go all the way over, the lower lever can get caught on the floor mat. 450 Heater Cables There are 3 bowden type heater cables that manually move levers to control the heater. The 2 main cables terminate in the right hand footwell. In Right Hand Drive cars, the cables are sometimes covered although some early RHD cars didn’t have a cover. These cars sometimes had issues with floor mats getting in the way of the lower lever. If this happens, the heat controller lever won’t move all the way over. On Left Hand Drive cars, the levers are covered the carpet and the polystyrene footwell block. Control Levers 3 of the levers are attached to bowden cables… …the “direction control lever”… …the “heat control lever”… …and the lever that selects either fresh or recirculated air. Click if info helped 21 likes 44482 views Print