evilution.co.uk/mod/450-valance-removal.htm

1 excerpts.

450 Valance Removal

evilution.co.uk/mod/450-valance-removal.htm · p. 1 · Applies to: 450

Mod Description The valance is the black plastic shield that sits at the bottom of the rear panel. Mod Details Premium No Difficulty Mod ID 575 Credit Evilution For Link https://evilution.co.uk/mod/450-valance-removal.htm Copy to Clipboard Remove the rear panel by following this information . Place a sheet down on the floor or take the panel inside to stop it getting scratched. If you are changing the valance over and need to swap the heat shield then use a Torx20 screwdriver, remove the ten screws from the heat shield. Remove the six plastic pins by either pushing from the back or levering from the front. An upholstery tool or tack remover can aid in the removal of these plastic pegs. With all six pins pulled out and all six plastic insert removed, the valance can pull up and out. Refitting is the reverse of above. Click if info helped 68 likes 56410 views Print