evilution.co.uk/mod/dump-valve-fitting.htm

1 excerpts.

Dump Valve Fitting

evilution.co.uk/mod/dump-valve-fitting.htm · p. 1 · Applies to: 450, 452

Mod Description Fitting a DV is a relatively easy process, depending on the type, it will replace 1 of 2 parts. Thanks to Shadow for the extra photos. Mod Details Premium Yes Difficulty Mod ID 248 Credit Evilution Cost £50 - ï¿ For Link https://evilution.co.uk/mod/dump-valve-fitting.htm Copy to Clipboard This guide is for fitting a DV to a Roadster or a fortwo 450 only. Your DV will either come with a metal pipe or a silicone T piece, the following is by no means a definitive guide but it should help understand what is fitted and where. Forge Motorsport sell a set of intercooler pipes with the DV outlet already attached. This means you don’t have to mess around with T pieces and the original pipes. Dump valves are a personal preference. You either like the noise they make or you don’t. They aren’t going to increase performance, in fact, getting the wrong dump valve can damage your smart. We recommend a Forge Motorsport restricted dump valve due to the size of the turbo on the smart. First Things First. It is a good idea to leave the dump valve submersed in clean engine oil over night before fitting, it frees up the internals and makes it more effective straight away. Allow the oil to drain fully from both ends of the DV before fitting. DV With A Metal Pipe Click if info helped 118 likes 94357 views Print