smartmaniacs.co.uk/forum/i-c-e/ice-neons-l-e-ds-etc/864652-high-level-led-brake-light-unit

1 excerpts.

Forum thread: Announcement

smartmaniacs.co.uk/forum/i-c-e/ice-neons-l-e-ds-etc/864652-high-level-led-brake-light-unit · p. 1 · Applies to: 450

Source: smartmaniacs.co.uk Topic: high level brake light bulb replacement Models discussed: 450 Language: en Solution status: yes

Problem: A couple of bulbs have stopped working in the high level third brake light; user unclear whether individual bulbs can be replaced or if the entire unit must be replaced.

Solution: Individual bulbs (T5 284 bulbs) can be replaced. Remove bulbs by using a flathead screwdriver and gentle hammer taps from the back, or grip with a short piece of rubber hose to avoid breaking glass. LEDs are also an option but may be slightly thicker and harder to install.

Key facts: - Individual bulbs can be replaced contrary to initial assumption that entire unit must be replaced - Bulbs are T5 type (284 specification mentioned) - Removal method: use flathead screwdriver and gentle hammer taps from back of reflector, or grip with rubber hose to create vacuum - Do not use pliers on bulb side as they will crush the glass - Reflector edges are sharp; handle with care - LED upgrades available but may be slightly thicker and difficult to insert initially - Bulbs are not common; may need to order online rather than source locally - Cost of replacement bulbs significantly less than replacing entire unit (£50)