451-speaker-upgrade.htm¶

1 excerpts.

451 Speaker Upgrade¶

evilution.co.uk/mod/451-speaker-upgrade.htm · p. 1 · Applies to: 451

Mod Description Even the upgraded speakers on the 451 are rubbish, the system has a lot of potential so lets realise it. Mod Details Premium Yes Difficulty Mod ID 208 Credit Various Cost £50+ For Link https://evilution.co.uk/mod/451-speaker-upgrade.htm Copy to Clipboard 451 Upgrade Speakers What I am fitting here are a set of Infinity 6020cs. They are 6.5 inches and come with a 2 way crossover and tweeters. You are not limited to just these, you can surface mount any speaker you want up to about 7.5 inches. You just have to be mindful when it comes to speaker depth. Front mounting the speakers lets you use a slightly deeper and wider speaker giving you better quality sound. Rear mounted speakers maximum depth 60mm Front mounted speakers maximum depth 70mm These maximum depths are totally dependent on the speaker and how it’s mounted. Take these as a guide. Not all speakers can be mounted from the back because of width, depth and height of the cone. If you run a speaker with a built in floating tweeter, they can knock against the existing speaker grill. That would limit the speaker travel, reduce performance, buzz like hell and sound terrible. Mounting from the front as this page shows you allows you to use the speaker covers that come with the speakers you bought. As they are designed for them they will be clear of all the moving parts and will sound great. Existing Wiring Which wire is negative? Which wire is positive? Although with speakers it doesn’t really matter which way you wire them as long as you wire them all the same way otherwise the phase will be out and it’ll sound a bit worse. It’s good to be consistent with the wiring. All of the speaker positive wires are solid colours. All of the speaker negaive wires have a different colour stripe. Fitting The Midrange Speakers – From The Back The proper way to do it. Click if info helped 209 likes 150916 views Print