EQ_Forfour_453_2018_Owner_Manual_224p.pdf

230 excerpts.

Manualslib.com - The Global Manuals Library

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 1 · Applies to: 453

Manuals / Brands / SMART Manuals / Automobile / EQ forfour 2018 / Owner's manual / PDF SMART EQ FORFOUR 2018 OWNER'S MANUAL Table of Contents Table of Contents Protecting the environment smart genuine parts Warranty for the smart Audio-System and smart Media-System Vehicle equipment Declarations of conformity Operating safety Information on the REACH Regulation QR codes for rescue card

Data stored in the vehicle

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 2 · Applies to: 453

Copyright information Cockpit Multifunction steering wheel Centre console with drawer Overhead control panel Door control panel Displays shown in the instrument cluster and the display Occupant safety Travelling safely with children in the vehicle Pets in the vehicle Driving safely Understanding functions of the key Opening the door Correct driver's seat position Adjusting the seats Adjusting the steering wheel Adjusting the mirrors Adjusting head restraints in the rear compartment Using the armrest Starting the engine Pulling away Automatic transmission Using the turn signals Acoustic presence indicator Radar-based recuperation Driving economically Braking correctly Driving on wet roads

Winter driving

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 3 · Applies to: 453

Lane Keeping Assist Cruise control and limiter Charging the high-voltage battery Switching on the lighting Adjusting the lighting Using the interior lighting Using the windscreen wipers Folding the sun visor to the side Locking and unlocking the vehicle from the inside Understanding the reversing function Opening and closing the windows Opening and closing the folding top Operating the climate control system Activating/deactivating the seat heating and steering wheel heating Using the accessories Parking Using the parking aid Using the reversing camera Locking the vehicle Priming and deactivating the anti-theft alarm system Overview of the on-board computer Calling up displays Setting values Operating and setting the smart Audio-System Listening to the radio Using a mobile phone Operating external data storage media

Operating and setting up the smart Media-System

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 4 · Applies to: 453

Listening to the radio Displaying energy consumption Using a mobile phone Connecting and operating external data storage media Viewing images Video playback Using TomTom Services Using the navigation system Online access to the vehicle Using smart "ready to" services Stowing small objects Removing and fitting the rear shelf Stowing luggage and large objects Using lashing eyelets Enlarging the load compartment Removing/fitting the charging cable bag Useful information Removing/fitting the subwoofer Opening and closing the service cover Checking service products and topping up Checking wheels and tyres Changing a wheel Using the tyre pressure monitor Checking the tyre pressures Using winter tyres Using snow chains Changing the window wiper blades Cleaning the vehicle

Observing service due dates

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 5 · Applies to: 453

Parking up the vehicle Securing the vehicle in the event of an accident or a breakdown Removing the first-aid kit Removing the fire extinguisher Removing the vehicle tool tray Sealing tyres using the TIREFIT kit Towing the vehicle Manually releasing the selector lever lock Replacing the bulbs Replacing fuses Replacing the key battery Open a door with the emergency release Locking the doors in an emergency Unlocking the tailgate with the emergency release Notes on display messages Locking and unlocking Vision, vehicle occupants, airbag Engine, brakes, transmission Charging process Driving safety systems Driver assistance systems Battery, lights, heating smart Audio-System and smart Media-System Obtaining technical data Reading vehicle data Service products Bulb types Fuse allocation

Radio type approvals for the tyre pressure monitors

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 6 · Applies to: 453

Installing two-way radios and mobile phones Other ManualsLib Projects

Symbols in the Owner's Manual

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 8 · Applies to: 453

The following symbols are used in this Owner's Manual: G WARNING Warning notes draw your attention to hazards that may endanger your health or life, or the health or life of others. Observe the warning notes. H Environmental note Environmental notes provide you with information on environmentally aware actions or disposal. ! Notes on material damage alert you to dangers that could lead to damage to your vehicle. i These symbols indicate useful instruc- tions or further information that could be helpful to you. X Instructions that must be followed. X Several consecutive symbols indicate an instruction with several consecutive steps. (Y page) Further information on a topic YY A warning or an instruction that is continued on the next page. Display text: Display text in the instru- ment cluster display, the smart Audio-Sys- tem or the smart Media-System. G WARNING If the front passenger airbag has been activated, a child on the front passenger seat may be hit by the front passenger airbag in the event of an accident. There is a risk of injury or fatal injury. NEVER use a rearward-facing child restraint system on a seat protected by an ACTIVE FRONT AIRBAG; DEATH or SERI- OUS INJURY to the CHILD can occur. Observe the "Children in the vehicle" sec- tion .

About this Owner's Manual

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 9 · Applies to: 453

Before you first drive off, read this Owner's Manual carefully and familiarise yourself with your vehicle. For your own safety and a longer vehicle life, follow the instructions and warning notices in this Owner's Man- ual. Disregarding them may lead to damage to the vehicle or personal injury. This Owner's Manual provides information on the most important functions of your vehicle. The equipment or model designation of your vehicle may vary according to: RModel ROrder RCountry variant RAvailability The illustrations in this Owner's Manual show a left-hand-drive vehicle. On right- hand-drive vehicles, the layout of compo- nents and controls differs accordingly. smart is constantly updating its vehicles to the state of the art. smart therefore reserves the right to intro- duce changes in the following areas: RDesign REquipment RTechnical features Therefore, the description may differ from your vehicle in some cases. Integral parts of the vehicle include: ROwner's Manual RService Booklet REquipment-dependent Supplements These documents should be kept in the vehicle at all times. If you sell the vehicle, always pass all documents on to the new owner. Your Owner's Manuals: Digital – on the Internet The Owner's Manual on the Internet provides you with convenient access to all the information relevant to your vehicle and multimedia system. It also offers helpful animations, exciting background information and a wide variety of search options. Digital – as an App Using the smart guides App, you can call up all of the information relevant to your vehicle and multimedia system online on your phone or as a download regardless of the status of your net- work connection. Available for smart- phones or tablets. QR codes for the smart guides App. Apple® iOS Android™ Please note that the smart guides App may not currently be available in your country. 4535847416 É4535847416%ËÍ

Index .........................................................

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 10 · Applies to: 453

5 Introduction ........................................... 22 Protecting the environment ................. 22 smart genuine parts .............................. 22 Warranty for the smart Audio- System and smart Media-System ........ 23 Vehicle equipment ................................. 23 Declarations of conformity ................... 23 Operating safety .................................... 25 Information on the REACH Regula- tion .......................................................... 28 QR codes for rescue card ....................... 29 Data stored in the vehicle .................... 29 Copyright information .......................... 30 At a glance .............................................. 31 Cockpit .................................................... 31 Multifunction steering wheel .............. 32 Centre console with drawer .................. 33 Overhead control panel ......................... 34 Door control panel ................................. 35 Displays shown in the instrument cluster and the display ......................... 36 Safety ...................................................... 37 Occupant safety ..................................... 37 Travelling safely with children in the vehicle .............................................. 44 Pets in the vehicle ................................. 58 Driving safely ........................................ 58 Entering and setting up ........................ 63 Understanding functions of the key ........................................................... 63 Opening the door ................................... 63 Correct driver's seat position ............... 63 Adjusting the seats ............................... 64 Adjusting the steering wheel ............... 65 Adjusting the mirrors ............................ 66 Adjusting head restraints in the rear compartment .................................. 67 Using the armrest .................................. 68 Driving ..................................................... 69 Starting the engine ............................... 69 Pulling away .......................................... 69 Automatic transmission ........................ 71 Using the turn signals .......................... 72 Acoustic presence indicator ................. 72 Radar-based recuperation ................... 72 Driving economically ............................ 73 Braking correctly ................................... 76 Driving on wet roads ............................. 77 Winter driving ........................................ 77 Lane Keeping Assist .............................. 78 Cruise control and limiter .................... 79 Charging the high-voltage bat- tery .......................................................... 80 Ensuring good visibility ........................ 89 Switching on the lighting ..................... 89 Adjusting the lighting .......................... 90 Using the interior lighting ................... 91 Using the windscreen wipers ............... 92 Folding the sun visor to the side ......... 93 Feeling comfortable in the vehicle interior .................................................... 94 Locking and unlocking the vehicle from the inside ....................................... 94 Understanding the reversing function .................................................. 95 Opening and closing the windows ....... 95 Opening and closing the folding top ............................................................ 96 Operating the climate control sys- tem ........................................................... 97 Activating/deactivating the seat heating and steering wheel heat- ing .......................................................... 100 Using the accessories .......................... 100 Parking and getting out ...................... 105 Parking .................................................. 105 Using the parking aid ......................... 105 Using the reversing camera ............... 106 Locking the vehicle ............................. 108 2 Contents

Priming and deactivating the

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 11 · Applies to: 453

anti-theft alarm system ..................... 108 Operating the on-board computer ..... 109 Overview of the on-board com- puter ...................................................... 109 Calling up displays .............................. 110 Setting values ...................................... 112 Using the smart Audio-System ........... 115 Operating and setting the smart Audio-System ....................................... 115 Listening to the radio .......................... 117 Using a mobile phone .......................... 118 Operating external data storage media ..................................................... 121 Using the smart Media-System .......... 123 Operating and setting up the smart Media-System ........................... 123 Listening to the radio .......................... 128 Displaying energy consumption ........ 129 Using a mobile phone .......................... 130 Connecting and operating external data storage media .............................. 135 Viewing images .................................... 136 Video playback ..................................... 137 Using TomTom Services ...................... 138 Using the navigation system ............. 140 Using online offerings ......................... 150 Online access to the vehicle ............... 150 Using smart "ready to" services ........ 151 Loading and stowing ............................ 152 Stowing small objects ......................... 152 Removing and fitting the rear shelf ....................................................... 153 Stowing luggage and large objects ... 153 Using lashing eyelets ......................... 154 Enlarging the load compartment ....... 155 Removing/fitting the charging cable bag ............................................... 157 Maintenance and care .......................... 158 Useful information ............................... 158 Removing/fitting the subwoofer ........ 158 Opening and closing the service cover ...................................................... 158 Checking service products and topping up ............................................ 160 Checking wheels and tyres ................. 161 Changing a wheel ................................ 162 Using the tyre pressure monitor ....... 166 Checking the tyre pressures .............. 167 Using winter tyres ............................... 168 Using snow chains ............................... 168 Changing the window wiper blades .................................................... 169 Cleaning the vehicle ............................ 170 Observing service due dates .............. 174 Parking up the vehicle ........................ 174 Dealing with accidents and break- downs .................................................... 175 Securing the vehicle in the event of an accident or a breakdown ........... 175 Removing the first-aid kit .................. 178 Removing the fire extinguisher ......... 178 Removing the vehicle tool tray .......... 179 Sealing tyres using the TIREFIT kit ........................................................... 179 Towing the vehicle .............................. 182 Manually releasing the selector lever lock .............................................. 183 Replacing the bulbs ............................ 184 Replacing fuses .................................... 186 Replacing the key battery .................. 188 Open a door with the emergency release. .................................................. 188 Locking the doors in an emer- gency ..................................................... 189 Unlocking the tailgate with the emergency release ............................... 189 Practical advice .................................... 191 Notes on display messages ................ 191 Locking and unlocking ........................ 191 Vision, vehicle occupants, airbag ...... 193 Engine, brakes, transmission ............. 195 Contents 3

Charging process ................................. 197

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 12 · Applies to: 453

Driving safety systems ....................... 200 Driver assistance systems .................. 205 Battery, lights, heating ....................... 208 smart Audio-System and smart Media-System ...................................... 210 Technical data ...................................... 213 Obtaining technical data .................... 213 Reading vehicle data ........................... 213 Service products .................................. 215 Bulb types ............................................. 215 Fuse allocation ..................................... 216 Radio type approvals for the tyre pressure monitors ................................ 218 Installing two-way radios and mobile phones ...................................... 219 4 Contents

12 V battery

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 13 · Applies to: 453

1, 2, 3 ... 12 V battery Important safety notes ................... 27 12 V socket see Socket (12 V) A ABS (Anti-lock Braking System) Display message ............................ 200 Function/notes ................................. 59 Warning lamp (yellow) .................. 200 Acceleration see Kickdown Acoustic presence indicator Deactivating/activating ................. 72 Function/notes ................................. 72 Activating voicemail ............................ 134 Active Brake Assist Activating or deactivating ............. 61 Display message ............................ 205 Forward collision warning function ............................................ 60 Function/notes ................................. 59 Important safety notes ................... 59 Switching off/on (on-board computer with colour display) ..... 113 Switching on/off (on-board computer with monochrome display) ........................................... 112 Adaptive brake lights ............................ 61 Adding a contact to favourites ........... 134 Adjusting the headlamp range ............. 90 Air conditioning General notes ................................... 97 Air distribution Setting (automatic climate control) ............................................. 97 Air pressure see Tyre pressure Air vents Important safety notes ................... 99 Setting ............................................... 99 Air vents see Air vents Air-recirculation mode Switching on/off (automatic climate control) ................................ 98 Airbag Enabling and disabling the passenger airbag* ........................... 54 Installation locations ...................... 41 Limited protection ........................... 42 Overview ........................................... 41 PASSENGER AIR BAG indicator lamps ................................................. 43 Airbags Front airbag (driver, front passenger) ........................................ 41 Kneebag ............................................ 41 Protection provided ......................... 41 Sidebag ............................................. 41 Triggering ........................................ 38 Windowbag ....................................... 41 Alarm Anti-theft alarm system ............... 108 Switching off .................................. 108 Alerts Setting (Audio-System) ................ 118 Ambient lighting Setting the brightness .................. 114 Switching on/off ............................ 114 Android Auto™ Using ............................................... 133 Animals see Pets in the vehicle Anti-entrapment feature see Reversing feature Anti-lock Braking System see ABS (Anti-lock Braking System) Anti-skid chains see Snow chains Anti-theft alarm system Priming/deactivating .................... 108 Switching off the alarm ................ 108 Aquaplaning ........................................... 77 Ashtray .................................................. 100 Audio-System Connecting a mobile phone .......... 118 Connecting Bluetooth® audio devices ............................................ 122 Connecting external audio equipment (AUX) ............................ 121 Operating ........................................ 115 Operating the radio ....................... 117 Overview ......................................... 115 Index 5

Setting interruption for news ...... 118

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 14 · Applies to: 453

Setting the time ............................. 116 System settings ............................. 116 Troubleshooting ............................. 210 Using external devices .................. 115 Volume/sound settings ................. 116 Warranty ........................................... 23 Authorised workshop see Qualified specialist workshop Automatic climate control Activating/deactivating air- recirculation mode .......................... 98 Cooling with air dehumidifica- tion .................................................... 98 Demisting the rear window ............ 98 Demisting the windscreen .............. 98 Increasing/decreasing the blower speed .................................... 97 Setting air distribution .................. 97 Setting the temperature ................. 97 Switching on/off .............................. 97 Windows misted up ......................... 98 Automatic headlamp mode .................... 89 Automatic transmission Display message ............................ 197 Engaging neutral ............................. 71 Engaging reverse gear .................... 71 Engaging the park position ............ 71 Important safety notes ................... 71 Kickdown .......................................... 72 Manually releasing the selec- tor lever lock .................................. 183 Pulling away .................................... 69 Starting the engine ......................... 69 Transmission positions .................. 71 AUX jack Audio-System ................................. 115 Media-System ................................ 123 B Battery Display message ............................ 208 Battery see High-voltage battery Battery (key) Important safety notes ................. 188 Replacing ........................................ 188 Battery (vehicle) see High-voltage battery Belt see Seat belt Belt tensioner Activation ......................................... 38 Belt warning ........................................... 41 Blower speed Increasing or decreasing (automatic climate control) ............ 97 Bluetooth® Activating mobile phone (Audio-System) ...................... 118, 119 Activating the mobile phone (Media-System) .............................. 130 Authorising function for mobile phone (Audio-System) ...... 119 Connecting a device (Media- System) ........................................... 135 Connecting a different mobile phone ....................................... 119, 131 Operating (Audio-System) ............ 122 Switching on/off (Media-Sys- tem) ................................................. 130 Bonnet (front) see Service cover Brake EBD ..................................................... 61 Brake Assist see Active Brake Assist Brake fluid Display message ............................ 196 Brake force distribution see EBD (electronic brake force distribution) Brake lamp Replacing bulbs ............................. 185 Brake lamps Adaptive ............................................ 61 Display message ............................ 209 Brakes ABS ..................................................... 59 Driving tips ...................................... 76 Important safety notes ................... 76 Parking brake ................................... 70 Warning lamp ................................. 196 6 Index

Braking

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 15 · Applies to: 453

Braking on steep downhill gra- dients ................................................ 77 Braking on wet road surfaces ........ 77 Limited braking performance on salt-treated roads ...................... 77 Breakdown Towing away .................................. 182 see Flat tyre C Call Ending ............................................. 132 Car see Vehicle Car key see Key Car park Destination entry .......................... 141 Car wash see Care Car wash (care) ..................................... 170 Care Automatic car wash ....................... 170 Carpets ............................................ 174 Cleaning the interior ..................... 172 Display ............................................ 172 Exterior ........................................... 170 Exterior lighting ............................ 172 High-pressure cleaner .................. 170 High-voltage battery ...................... 83 Interior ............................................ 172 Notes ............................................... 170 Paint ................................................ 172 Plastic trim ..................................... 173 Reversing camera .......................... 171 Roof lining .............................. 172, 174 Seat belt .......................................... 173 Seat cover ....................................... 173 Selector lever ................................. 173 Sensors ............................................ 171 Steering wheel ............................... 173 Trim pieces ..................................... 174 Vehicle ............................................ 170 Washing by hand ........................... 170 Wheels ............................................. 171 Windows .......................................... 172 Wiper blades ................................... 172 Cargo box Removing (rear seats) ................... 157 Central locking Automatic locking ............................ 94 Locking/unlocking (key) ............... 108 Centre console Overview ........................................... 33 Changing the route Navigation ...................................... 143 Charge cable Display message ............................ 197 Charge level display .............................. 74 Charging see Charging the high-voltage battery Charging cable Connection ........................................ 87 Control panel .................................... 86 Disconnecting .................................. 87 Heating up ........................................ 83 Storing .............................................. 88 Charging cable bag Removing/fitting ........................... 157 Charging current Display messages .......................... 197 Child seat Approval categories ........................ 48 Basic instructions ........................... 44 Disabling or enabling the front passenger front airbag ................... 54 Front passenger seat (notes) .......... 57 ISOFIX/i-Size (fitting) ..................... 51 Notes on risks and dangers ............ 44 Recommendations for child restraint systems ............................ 46 Seats suitable for belt-secured child restraint systems .................. 55 Seats suitable for ISOFIX child restraint systems ............................ 49 Securing (notes) ............................... 48 Securing on the front passenger seat ................................. 58 Securing on the rear seat ............... 57 Suitability of the seats for i- Size child restraint systems .......... 51 Top Tether ........................................ 53 Index 7

Children

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 16 · Applies to: 453

Avoiding dangers in the vehi- cle ...................................................... 44 Basic instructions ........................... 44 Cigarette lighter ................................... 100 Cleaning see Care Climate control Automatic air conditioning ............ 97 Setting the air vents ....................... 99 Clock Setting the time (Media-Sys- tem) ................................................. 126 Cockpit Overview ........................................... 31 Collision warning Warning lamp ................................. 205 COMAND display Cleaning .......................................... 172 Connecting a telephone Deleting a mobile phone ............... 131 Connectivity manager .......................... 139 Constant headlamp mode see Daytime driving lights Consumption details Calling up (Media-System) ........... 130 Continuous wipe ..................................... 92 Switching on/off .............................. 92 Controlling speed see Cruise control Coolant Checking coolant level and topping up ...................................... 160 Important safety notes ................. 160 Cooling see Climate control Cooling with air dehumidification Automatic climate control .............. 98 Copyright ................................................ 30 Cornering light function ........................ 90 Cover (front) see Service cover Crosswind Assist ..................................... 61 Cruise control Activating ......................................... 79 Buttons .............................................. 79 Calling up the speed last stored ................................................ 80 Cancelling cruise control ................ 79 Deactivating ..................................... 80 Display message (colour dis- play) ................................................ 207 Display message (monochrome display) ........................................... 207 Function/notes ................................. 79 General notes ................................... 79 Important safety notes ................... 79 Increasing/decreasing the speed ................................................. 79 Storing and maintaining cur- rent speed ......................................... 79 Cup holder Centre console ................................ 152 Important safety notes ................. 152 Rear compartment ......................... 153 Cup holder see Cup holder D DAB radio see Digital radio Dashboard see Cockpit Data see Technical data Data sharing Managing ........................................ 139 Data storage media see External data storage media Daytime driving lights ........................... 89 Dealership see Qualified specialist workshop Declarations of conformity .................... 23 Diagnostics connection .......................... 26 Digital radio Audio-System ................................. 117 Displaying services (Media- System) ........................................... 129 EPG (Electronic Programme Guide) (Media-System) ................. 129 Frequency range (Audio-Sys- tem) ................................................. 117 Intellitext™ (Media-System) ........ 129 Introducing (Audio-System) ........ 117 Media-System ................................ 128 8 Index

Setting interruption for news

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 17 · Applies to: 453

(Audio-System) .............................. 118 Slide show (Media-System) .......... 129 Digital speedometer Displaying ...................................... 113 Dipped-beam headlamps Driving abroad ................................. 91 Replacing bulbs ............................. 184 Switching on/off .............................. 89 Disconnecting ....................................... 131 Display Colour .............................................. 109 Monochrome ................................... 109 Display message Colour display ................................ 112 Display messages General information ...................... 191 Display mode Frequency display mode ....... 128, 129 List display mode .......................... 128 Preset display mode ...................... 128 Disposal of old devices .......................... 83 Distance recorder Monochrome display ..................... 110 Distance recorder see Trip meter Door Automatic locking (switch) ............ 94 Central locking/unlocking (key) ................................................ 108 Control panel .................................... 35 Display message ............................ 192 Emergency locking ........................ 189 Emergency unlocking ................... 188 Opening (from the inside) ............... 94 Unlocking (key) ................................ 63 Double lock function .............................. 94 Driver's door see Door Driver's seat see Seat Driving abroad Symmetrical dipped beam .............. 91 Driving noise see Acoustic presence indicator Driving safety system Active Brake Assist .......................... 59 Crosswind Assist .............................. 61 Driving safety system limita- tions .................................................. 58 EBD (electronic brake force distribution) ..................................... 61 Driving safety systems ABS (Anti-lock Braking Sys- tem) ................................................... 59 Adaptive brake lights ..................... 61 ESP® (Electronic Stability Pro- gram) ................................................. 61 ETS (Electronic Traction Sys- tem) ................................................... 61 Driving systems Cruise control ................................... 79 Lane Keeping Assist ........................ 78 Speed limiter .................................... 79 Driving tips Aquaplaning ..................................... 77 Brakes ................................................ 76 Downhill gradient ............................ 77 Driving in winter ............................. 77 Driving on flooded roads ................ 77 Driving on wet roads ....................... 77 Icy road surfaces ............................. 77 Limited braking efficiency on salted roads ...................................... 77 Pulling away .................................... 69 Symmetrical dipped beam .............. 91 see Economical driving Dynamic handling control system see ESP® (Electronic Stability Program) E EBD (electronic brake force distri- bution) Function/notes ................................. 61 Indicator lamp ................................ 200 ECO mode Switching on/off .............................. 74 eco score Calling up ......................................... 75 Comparing the trip .......................... 76 Display (colour display) ................. 75 Display (monochrome display) ...... 75 Evaluating the current trip ............ 75 Function/notes ................................. 75 Index 9

Preferred trips .................................

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 18 · Applies to: 453

76 Renaming a category ...................... 76 Resetting a category ....................... 76 Resetting data .................................. 76 Saving the trip ................................. 75 Economical driving eco score display ............................. 75 General information ........................ 73 Electrical fuses see Fuses Electromagnetic compatibility Declaration of conformity ............... 23 Electronic Brake-force Distribu- tion see EBD (electronic brake force distribution) Electronic Stability Program see ESP® (Electronic Stability Program) Electronic Traction System see ETS (Electronic Traction System) Emergency assistance system Automatic emergency call ............ 176 Button in the overhead control panel ............................................... 175 Manual emergency call ................. 176 Overview ......................................... 175 Requirements ................................. 175 Transmitted data ........................... 175 Emergency release Driver's door ................................... 188 Emergency unlocking Tailgate ........................................... 189 Vehicle ............................................ 188 Energy Displaying the current con- sumption (colour display) ............ 111 Energy consumption High-voltage battery ...................... 82 Energy flow display Calling up (Media-System) ........... 129 Colour display ................................ 111 Engine Starting problems .......................... 195 Starting the engine with the key ..................................................... 69 Engine compartment ............................ 158 Engine electronics Notes ................................................. 25 Entering a destination Entering a destination via TomTom Places ............................... 143 Navigation ...................................... 140 Entering the destination Selecting your home town as the destination ............................... 141 Environmental protection High-voltage battery ...................... 22 Returning an end-of-life vehi- cle ...................................................... 22 EPG (Electronic Program Guide) Displaying (Audio-System) .......... 118 EPG (Electronic Programme Guide) Displaying (Media-System) .......... 129 ESP® (Electronic Stability Program) Crosswind Assist .............................. 61 Display message ............................ 201 General notes ................................... 61 Important safety guidelines .......... 61 Warning and indicator lamps ...... 201 ETS (Electronic Traction System) ......... 61 Exterior lighting Cleaning .......................................... 172 see Lights Exterior mirrors Adjusting .......................................... 67 Adjusting (electrically) ................... 67 Out of position (troubleshoot- ing) .................................................. 193 External audio equipment (AUX) Connecting (Audio-System) ......... 121 External data carriers Connection (Media-System) ......... 135 Operation (Media-System) ........... 135 External data storage media Connecting (Audio-System) ......... 115 Operating (Audio-System) ............ 121 F Factory settings Resetting (Media-System) ............ 126 Favourites Creating (Media-System) .............. 127 Managing (Media-System) ........... 127 10 Index

Fire extinguisher .................................. 178

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 19 · Applies to: 453

First-aid kit .......................................... 178 Fitting a wheel Fitting a wheel ............................... 165 Preparing the vehicle .................... 163 Raising the vehicle ........................ 163 Removing a wheel .......................... 163 Securing the vehicle against rolling away ................................... 177 Fitting/removing front wheel arch cover .................. 185 Flat tyre Preparing the vehicle .................... 175 TIREFIT kit ...................................... 179 Floormat ................................................ 101 Foglamps Switching on/off .............................. 90 Folding top Important safety notes ................... 96 Operating .......................................... 96 Problem (malfunction) .................. 192 Fording On flooded roads .............................. 77 Forward collision warning function Function/notes ................................. 60 Frequencies Mobile phone .................................. 219 Two-way radio ............................... 219 Front airbag ............................................ 41 Front cover see Service cover Front wheel arch Fitting/removing the cover .......... 185 Front-passenger front airbag deactivation system PASSENGER AIR BAG indicator lamps ................................................. 43 Status indicator ............................... 43 Front-passenger seat see Seat Frontal area cover see Service cover Functions of the key Understanding ................................. 63 Further settings ................................... 134 Fuses Allocation chart ............................. 216 Before changing ............................. 187 Dashboard fuse box ....................... 187 Important safety notes ................. 186 Opening the fuse box ..................... 187 G Glove compartment .............................. 153 H Hand brake see Parking brake Hands-free system see Mobile phone Hazard warning lamps Switching on/off ............................ 175 Head restraints Adjusting (rear) ............................... 67 Headlamp flasher ................................... 90 Headlamps see Automatic headlamp mode Heating see Climate control High-voltage battery Battery care ...................................... 83 Charge level ...................................... 74 Charge level display ........................ 74 Charging (charging station) ........... 84 Charging (mains socket) ................. 87 Charging (wallbox) .......................... 84 Charging cable heating up ............. 83 Discharged battery .......................... 82 Display message ............................ 208 Energy consumption ....................... 82 Important safety notes ................... 80 Indicator lamp (vehicle socket) ..... 84 Method of operation ........................ 81 Outside temperatures ...................... 82 Problems during charging ............ 197 Protective equipment ...................... 83 Range ................................................ 82 READY indicator ............................. 208 Terms of use ..................................... 83 Vehicle socket .................................. 83 Warning and indicator lamps ...... 208 High-voltage electrical system Automatic switch-off ...................... 28 Danger of electric shock ................. 27 Operating safety .............................. 27 Index 11

Vehicle fire ....................................... 28

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 20 · Applies to: 453

Hinged windows Opening/closing ............................... 96 Home address Entering and saving ...................... 141 Home address (navigation) see Home address I i-Announcements (DAB) ...................... 129 i-Size child seat securing system Fitting ............................................... 51 Suitable seats for securing ............ 51 i-Traffic Traffic announcements ................. 129 Ice warning Warning lamp (colour display) .... 208 Warning lamp (monochrome display) ........................................... 208 Ignition lock see Key positions Image Playback (Media-System) ............. 136 Immobiliser ........................................... 108 Indicator and warning lamp Restraint system ............................ 194 Indicator and warning lamps Battery ............................................ 208 Indicator lamps see Warning and indicator lamps Instrument cluster Overview ........................................... 36 Warning and indicator lamps ........ 36 Instrument cluster lighting Setting ............................................. 113 Instrument lighting see Instrument cluster lighting Intellitext™ Setting (Media-System) ................ 129 Switching on (Audio-System) ...... 118 Interior lighting ..................................... 91 Adjusting the ambient lighting (colour display) ................................ 91 Changing bulbs .............................. 186 Setting the ambient lighting ....... 114 Switching on/off .............................. 91 Intermittent wipe ................................... 92 ISOFIX child seat securing system Fitting ............................................... 51 Suitable seats for securing ............ 49 J Jack Using ............................................... 163 K Key Changing the battery .................... 188 Loss .................................................. 191 Position in the ignition lock .......... 69 Problem (malfunction) .................. 191 Starting the engine ......................... 69 Key positions (ignition lock) ................. 69 Keyboard Adjusting (Media-System) ............ 125 Kickdown ................................................. 72 Kneebag ................................................... 41 L Lamps see Warning and indicator lamps Lane Keeping Assist Activating/deactivating ................. 78 Function/information ...................... 78 Warning lamp (colour display) .... 207 Warning lamp (monochrome display) ........................................... 207 Lane recognition system (auto- matic) see Lane Keeping Assist Language Selecting (Media-System) ............ 125 Language (on-board computer) .......... 114 Lashing eyelets .................................... 154 Licence plate lighting Changing bulbs .............................. 186 Light see Replacing bulbs Lighting see Lights Lights Automatic headlamp mode ............. 89 Cornering light function ................. 90 12 Index

Dipped-beam headlamps ................ 89

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 21 · Applies to: 453

Display message ............................ 210 Driving abroad ................................. 91 Foglamps .......................................... 90 Hazard warning lamps .................. 175 Headlamp flasher ............................ 90 Headlamp range ............................... 90 Light switch ..................................... 89 Main-beam headlamps ................... 89 Rear foglamp .................................... 90 Setting the ambient lighting ....... 114 Side lamps ........................................ 90 Turn signals ..................................... 72 see Interior lighting Limiter Calling up the stored limit speed ................................................. 80 Cancelling ......................................... 79 Deactivating ..................................... 80 Display message (colour dis- play) ................................................ 207 Exceeding the stored limit speed ................................................. 79 General notes ................................... 79 Increasing or reducing the stored limit speed ............................ 79 Limiting the speed see Speed limiter Loading guidelines ............................... 153 Locking see Central locking Locking (doors) Automatic ......................................... 94 Emergency locking ........................ 189 From inside (central locking button) .............................................. 94 Loudspeaker see Subwoofer Luggage compartment enlarge- ment ....................................................... 155 M M+S tyres (winter tyres) ...................... 168 Main-beam headlamps Replacing bulbs ............................. 184 Switching on/off .............................. 89 Making a call Media-System ................................ 131 Malfunction message see Display message Manually releasing the selector lever lock (automatic transmis- sion) ....................................................... 183 Media-System Adjusting the on-screen key- board ............................................... 125 Buttons on the multifunction steering wheel ............................... 123 Calling up Applications man- ager ................................................. 139 Calling up menus ........................... 125 Connectivity manager ................... 139 Consumption details ...................... 130 Controls ........................................... 123 Creating favourites ........................ 127 Data connectivity .......................... 138 Display settings ............................. 125 Downloading updates and POIs ... 139 eco score ........................................... 75 Enabling data sharing .................. 139 Energy flow display ...................... 129 Home screen ................................... 124 Image playback .............................. 136 Navigation menu ........................... 140 Navigation system ......................... 140 Operating the radio ....................... 128 Overview ......................................... 123 Problem solving ............................. 210 Reversing camera .......................... 106 Selecting the home screen dis- play ................................................. 125 Selecting the language ................. 125 Setting the time ............................. 126 Setting warning tones ................... 127 Status and information ................. 126 Switching on/off ............................ 124 System menu .................................. 125 System settings ............................. 125 Video playback ............................... 137 Volume/tone settings .................... 126 Warranty ........................................... 23 Message memory (colour display) ...... 112 MirrorLink™ Using ............................................... 132 Index 13

Mirrors

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 22 · Applies to: 453

Adjustment ....................................... 66 see Exterior mirrors see Rear-view mirror Mobile phone Connecting (Audio-System) ......... 118 Connecting (Media-System) ......... 130 De-authorising .............................. 119 Downloading data automati- cally (Media-System) .................... 131 Frequencies .................................... 219 Installation ..................................... 219 Loading and updating the telephone book (Audio-System) ... 119 Making a call (Media-System) ..... 131 Setting the sound (Audio-Sys- tem) ................................................. 119 Transmission output (maxi- mum) ................................................ 219 Using Android Auto™ .................... 133 Using MirrorLink™ ........................ 132 Using voice control (Audio- System) ........................................... 120 Using voice control (Media- System) ........................................... 134 Model series see Vehicle identification plate Multi-functional seat see Seat Multifunction steering wheel Overview ........................................... 32 Multimedia menu settings Radio settings ................................ 129 N Navigation Alternative route ........................... 144 Changing the route ........................ 143 Current location ............................. 146 Destination memory ...................... 141 Displaying the reachability map .................................................. 147 Entering a charging station as a destination .................................. 141 Entering a destination .................. 140 Entering a destination by address ............................................ 140 Entering a destination using geo-coordinates ............................. 141 Entering a destination using the map ........................................... 141 Entering a POI ................................ 142 Entering/saving your home address ............................................ 141 Reading map data .......................... 140 Route details .................................. 143 Selecting a destination from the list of last destinations .......... 141 Setting route planning .................. 144 Setting the voice ............................ 148 Starting ........................................... 140 Starting route calculation ............ 143 Switching announcements on/off ............................................... 145 System settings ............................. 148 TomTom Services .................... 138, 147 Traffic information ........................ 146 Troubleshooting ............................. 211 Using information during route guidance ............................... 145 Way points ...................................... 144 Navigation menu settings Changing the map .......................... 148 Changing the map colours ............ 148 Managing POIs ............................... 142 Managing saved locations ............ 141 O Occupant safety Airbags .............................................. 41 Belt warning ..................................... 41 Children in the vehicle ................... 44 PASSENGER AIRBAG indicator lamp ................................................... 43 Pets in the vehicle ........................... 58 Restraint system ............................. 37 Restraint system warning lamp ................................................... 37 Seat belts .......................................... 39 On-board computer Calling up displays (colour display) ........................................... 110 Calling up displays (mono- chrome display) ............................. 110 14 Index

Important safety notes ................. 109

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 23 · Applies to: 453

Operation ........................................ 109 Overview ......................................... 109 Selecting the language ................. 114 Setting and resetting values (colour display) ...................... 112, 113 Setting and resetting values (monochrome display) .................. 112 On-board diagnostics interface see Diagnostics connection On-screen keyboard Adjusting (Media-System) ............ 125 Online access ........................................ 150 Operating instructions Vehicle equipment ........................... 23 Operating safety Declaration of conformity ............... 23 High-voltage electrical system ..... 27 Operating system see On-board computer Original parts ......................................... 22 Outside temperature display Colour display ................................ 109 Monochrome display ..................... 109 Setting the units ............................ 113 Outside temperatures High-voltage battery ...................... 82 Overhead control panel ......................... 34 Overvoltage protection High-voltage battery ...................... 83 P Paint code ............................................. 213 Paintwork (cleaning instructions) ...... 172 Panorama roof Cleaning .......................................... 172 Park brake see Parking brake Parking .................................................. 105 Engaging park position .................. 71 Important safety notes ................. 105 Parking aid ..................................... 105 Parking brake ................................... 70 Reversing camera .......................... 106 Parking brake Display message ............................ 196 General information ........................ 70 Warning lamp ................................. 196 PASSENGER AIR BAG Disabling/activating ....................... 54 Indicator lamps ................................ 43 Passenger airbag Enabling and disabling ................. 54 Problem (malfunction) ................. 194 Passenger seat Folding down .................................. 155 Pets in the vehicle ................................. 58 Phone book Calling a contact ............................ 131 Updating the phone book ............. 134 Phone menu settings Voicemail configuration ............... 134 Power display ......................................... 74 Power windows see Side windows Pre-entry climate control and charging Colour display ................................ 112 Pre-entry climate control at departure time Smart-Charging ............................... 98 Pre-entry climate control at time of departure Setting departure time .................... 98 Programme type list (PTY) .................. 129 Protection against theft Anti-theft alarm system ............... 108 Protection of the environment General notes ................................... 22 Pulling away General notes ................................... 69 Hill start assist ................................ 71 Q QR code Rescue card ...................................... 29 Qualified specialist workshop ............... 26 R Radar-based recuperation Function/notes ................................. 72 Switching off/on (on-board computer with colour display) ..... 113 Index 15

Radio

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 24 · Applies to: 453

Changing a station (on-board computer) ........................................ 129 Display mode .................................. 128 Displaying programme infor- mation (EPG) (Audio-System) ....... 118 i-Traffic (Traffic announce- ments) ............................................. 129 Operating (Audio-System) ............ 117 Operation (Media-System) ........... 128 Switching on ........................... 117, 128 Radio station Storing ............................................ 129 Radio text Displaying (Audio-System) .. 117, 118 Displaying (Media-System) .......... 129 Radio type approvals Tyre pressure monitors ................. 218 Radio-based vehicle components Declaration of conformity ............... 23 Rain sensor ............................................. 92 Rain/light sensor (display mes- sage) ...................................................... 209 Range High-voltage battery ...................... 82 RBS see Radar-based recuperation RDS (Radio Data System) ...................... 117 REACH Regulation ................................... 28 Reading lamp .......................................... 91 Readyspace seats ................................. 156 Rear bench seat Folding the backrest forwards/ back ................................................. 155 Rear foglamp Replacing bulbs ............................. 185 Switching on/off .............................. 90 Rear lamp Replacing bulbs ............................. 185 Rear parking aid Activating/deactivating ............... 105 Function/notes ............................... 105 Rear seat Adjusting the angle of the backrests ........................................ 156 Rear seat heating ........................... 100 Rear seat see Rear bench seat Rear seats readyspace seats ........................... 156 Removing the cargo box ................ 157 Rotating the seat cushions ........... 156 Rear shelf .............................................. 153 Rear window heating Demisting the rear window (automatic climate control) ............ 98 Rear window wiper Automatic rear window wiper when in reverse gear ....................... 93 Replacing the wiper blade ............ 170 Switching on/off .............................. 92 Rear-compartment seat belt sta- tus indicator ........................................... 41 Rear-view mirror Adjusting .......................................... 66 Anti-dazzle mode (automatic) ....... 66 Dipping (manual) ............................. 66 Recharging cable Indicator lamp ................................. 86 Recuperation (radar based) Function/notes ................................. 72 Recuperation (radar-based) Switching on and off (colour display) ........................................... 113 Recycling see Protection of the environment Reflective safety jacket ....................... 178 Remote configuration smart control .................................. 150 Remote query functions smart control .................................. 150 Replacing bulbs Brake lamp ...................................... 185 Dipped-beam headlamps .............. 184 Fitting/removing the cover (front wheel arch) .......................... 185 Important safety notes ................. 184 LED ................................................... 185 Licence plate lighting ................... 186 Main-beam headlamps ................. 184 Overview of bulb types ................. 215 Rear foglamp .................................. 185 Rear lamp ........................................ 185 Reversing lamp .............................. 185 Turn signal lamp (rear) ................. 185 see Changing bulbs 16 Index

Replacing lamps

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 25 · Applies to: 453

see Changing bulbs Replacing the bulb Turn signal lamp (front) ............... 185 Replacing the bulbs Interior lighting ............................ 186 Rescue card ............................................. 29 Restraint system Basic instructions ........................... 44 Display message ............................ 194 Function during an accident .......... 38 Limited protection ........................... 37 Malfunction ...................................... 37 Operational readiness ..................... 37 Protection provided ......................... 37 Self-check ......................................... 37 Warning lamp ................................. 194 Warning lamp (function) ................ 37 Reverse gear Engaging (automatic trans- mission) ............................................ 71 Reversing camera Cleaning instructions ................... 171 Function/notes ............................... 106 Guide lines in the display ............ 107 Settings ........................................... 107 Switching on/off ............................ 107 Reversing feature Side windows .................................... 95 Reversing lamp Replacing bulbs ............................. 185 Roof lining and carpets (cleaning instructions) ......................................... 174 Route Editing ............................................ 143 Route planning Planning a route in advance ........ 144 S Safety Children in the vehicle ................... 44 see Occupant safety see Operating safety Safety system see Driving safety system SD card Connecting (Media-System) ......... 135 Reading map data .......................... 140 SD card slot ..................................... 123 Seat Adjusting rear head restraint ........ 67 Correct driver's seat position ......... 63 Folding passenger seat down ....... 155 Folding the backrest (rear compartment) forwards/back ....... 155 Seat belt Limited protection ........................... 39 Protection provided ......................... 39 Seat belts Adjusting the height ....................... 40 Cleaning .......................................... 173 Fastening .......................................... 40 Rear seat belt status indicator ...... 41 Releasing .......................................... 40 Warning lamp ................................. 193 Warning lamp (function) ................ 41 Seat cushions Rotating (rear seats) ..................... 156 Seat heating .......................................... 100 Seats Adjusting (manually) ...................... 64 Cleaning the cover ......................... 173 Important safety notes ................... 64 Switching seat heating on/off ...... 100 Selecting units Displaying GPS coordinates ......... 149 Selector lever Cleaning .......................................... 173 Selector lever see Automatic transmission Sensors (cleaning instructions) .......... 171 Service Centre see Qualified specialist workshop Service cover ........................................ 158 Service display Calling up (colour display) ........... 112 Calling up (monochrome dis- play) ................................................ 110 Service due date Display message ............................ 197 Service products Brake fluid ...................................... 215 Checking ......................................... 160 Coolant (engine) ............................. 160 Important safety notes ................. 160 Index 17

Topping up .....................................

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 26 · Applies to: 453

160 Washer fluid ................................... 215 Services menu settings TomTom Services ........................... 138 Setting the waveband .......................... 117 Settings Time format .................................... 126 Side lamps Switching on/off .............................. 90 Side windows Important safety notes ................... 95 Opening/closing ............................... 96 Opening/closing the hinged window .............................................. 96 Problem (malfunction) .................. 192 Resetting ......................................... 192 Reversing feature ............................ 95 Sidebag .................................................... 41 smart Centre see Qualified specialist workshop smart control Internet ........................................... 150 smart Services Registering ..................................... 151 Using ............................................... 151 Smart-Charging Function/notes ................................. 98 Smartphone Screen Setting (Media -System) ............... 132 Snow chains .......................................... 168 Socket (12 V) Centre console ................................ 101 Socket (high-voltage battery) see Vehicle socket Sound Setting (Audio-System) ................ 116 Setting (Media-System) ................ 126 Sound generator see Acoustic presence indicator Speakers see Subwoofer Special destination Entry ............................................... 142 Specialist workshop ............................... 26 Speed limiter Activating ......................................... 79 Functions and conditions for activation ......................................... 79 Setting limit speed .......................... 79 Speedometer Digital ............................................. 109 Displaying (digital speedome- ter) ................................................... 113 General notes (digital speed- ometer) ............................................ 112 see Instrument cluster Starting (engine) .................................... 69 Starting the engine see Starting (engine) Station Selecting a stored station (Audio-System) .............................. 117 Setting (Media-System) ................ 128 Storing ............................................ 129 Station list Setting a station from the sta- tion list (Audio-System) ............... 117 Updating (Media-System) ............ 129 Station search ....................................... 129 Audio-System ................................. 117 Stations Setting (Audio-System) ................ 117 Storing (Audio-System) ................ 117 Steering Display message (colour dis- play) ................................................ 205 Warning lamps ............................... 205 Steering wheel Adjusting (manually) ...................... 65 Button overview ............................... 32 Cleaning .......................................... 173 Important safety notes ................... 65 Steering wheel heating Switching on/off ............................ 100 Stowage compartments Centre console ................................ 152 Cup holder ....................................... 152 Door ................................................. 152 Glove compartment ........................ 152 Important safety information ...... 152 Rear ................................................. 153 Subwoofer Fitting/removing ........................... 158 Sun visor ................................................. 93 SVHC (Substances of Very High Concern) .................................................. 28 18 Index

System menu

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 27 · Applies to: 453

Safety warnings ............................. 148 System menu settings Voice output settings .................... 148 T Tablet bracket Affixing protective film ................ 102 Dismantling .................................... 104 Important safety notes ................. 101 Mounting ......................................... 102 Using ............................................... 101 Tailgate Emergency unlocking ................... 189 Opening dimensions ...................... 213 Opening/closing ............................. 154 Warning lamp ................................. 192 Technical data Information .................................... 213 Vehicle data .................................... 213 Telephone Voice control .................................. 134 Telephone (on-board computer) Accepting an incoming call .......... 131 Rejecting or ending a call ............. 131 Telephone book Loading (Audio-System) ............... 119 Telephone operation Audio-System ................................. 119 Temperature Setting (automatic climate control) ............................................. 97 Time Setting (Audio-System) ................ 116 Setting (colour display) ................ 113 Setting (monochrome display) ..... 112 Setting the time format (colour display) ........................................... 113 TIREFIT kit ............................................ 179 TomTom Services Activating ....................................... 138 Introduction ................................... 138 My Services menu .......................... 139 Starting ........................................... 139 Subscription status ....................... 139 Traffic information menu ............. 147 Tool see Vehicle tool kit Top Tether .............................................. 53 Total distance recorder Colour display ................................ 111 Monochrome display ..................... 109 Setting the display unit ................ 113 Touchscreen Confirming settings with Done .... 125 Operating the touchscreen ........... 124 Towing Important safety notes ................. 182 Towing away Fitting the towing eye .................. 183 Removing the towing eye ............. 183 With both axles on the ground ..... 183 Traction system see ETS (Electronic Traction System) Traffic announcements Calling up ....................................... 146 Traffic reports Switching on/off ............................ 117 Transmission see Automatic transmission Transporting the vehicle ..................... 183 Trip computer Displaying ...................................... 111 Trip meter Colour display ................................ 111 Displaying (colour display) .......... 111 Displaying (monochrome dis- play) ................................................ 110 Trip meter see Trip meter Turn signal lamp (front) Replacing the bulb ........................ 185 Turn signal lamp (rear) Replacing bulbs ............................. 185 Turn signals Replacing the bulb ........................ 185 Switching on/off .............................. 72 Turn signals see Turn signals Two-way radio Frequencies .................................... 219 Installation ..................................... 219 Transmission output (maxi- mum) ................................................ 219 Index 19

Type identification plate

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 28 · Applies to: 453

see Vehicle identification plate Tyre pressure Adjusting ........................................ 181 Checking/correcting ...................... 168 Display message ............................ 202 Important safety notes ................. 167 Not reached (TIREFIT) ................... 181 Reached (TIREFIT) .......................... 181 Recommended ................................ 167 Tyre pressure monitor Function/notes ............................... 166 Radio type approval for the tyre pressure monitor ................... 218 Restarting ....................................... 166 Restarting (on-board computer with colour display) ...................... 167 Restarting (on-board computer with monochrome display) ........... 166 Starting ........................................... 114 Using ............................................... 166 Warning lamp ................................. 202 Tyre sealant Using ............................................... 180 Tyres Changing a wheel .......................... 162 Checking ......................................... 161 Direction of rotation ...................... 165 Important safety notes ................. 161 M+S tyres (winter tyres) ............... 168 Rules for new tyres ........................ 162 Service life ...................................... 162 Snow chains .................................... 168 Storing ............................................ 166 Tyre tread ....................................... 161 see Flat tyre U Unit of measurement for distance Setting ..................................... 113, 149 Units Setting (on-board computer) ....... 113 Unlocking From inside the vehicle (cen- tral unlocking button) .................... 94 With emergency key element ....... 188 Updating the call log ........................... 134 USB device Connecting (Audio-System) ......... 121 Connection (Media-System) ......... 135 Operating (Audio-System) ............ 121 USB port Audio-System ................................. 115 Media-System ................................ 123 Using a mobile phone ................... 118, 130 V Values Setting (colour display) ................ 112 Setting (monochrome display) ..... 112 Vehicle Correct use ........................................ 28 Data acquisition .............................. 29 Electronics ........................................ 25 Equipment ........................................ 23 Implied warranty ............................. 28 Locking (in an emergency) ........... 189 Locking (key) .................................. 108 Operating safety .............................. 25 Parking ............................................ 105 Parking up ...................................... 174 Raising ............................................ 163 REACH Regulation ............................ 28 Registration ...................................... 27 Remote configuration .................... 150 Remote query functions ................ 150 Securing from rolling away .......... 177 Towing away .................................. 182 Transporting .................................. 183 Unlocking (in an emergency) ....... 188 Unlocking (key) ................................ 63 Vehicle data .................................... 213 Vehicle data .......................................... 213 Charging cable ............................... 215 Charging time ................................. 214 Dimensions and weights ............... 214 Vehicle dimensions .............................. 213 Vehicle emergency locking ................. 189 Vehicle identification number see VIN Vehicle identification plate ................. 213 Vehicle key see Key 20 Index

Vehicle menu settings

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 29 · Applies to: 453

Activating/deactivating eco score after a trip .............................. 76 Vehicle socket High-voltage battery ...................... 83 Indicator lamp ................................. 84 Problems during the charging process ............................................ 197 Vehicle tool kit ..................................... 179 Ventilation see Air conditioning Video Playback (Media-System) ............. 137 VIN ......................................................... 213 Voice control system Entering a destination in the navigation system ......................... 141 Problems with the voice con- trol system ...................................... 211 Starting an application ................. 123 Voltage range High-voltage battery ...................... 81 Volume Adjusting ........................................ 134 Adjusting automatically ............... 116 Setting (Audio-System) ................ 116 Setting (Media-System) ................ 126 W Warning and indicator lamps ABS ................................................... 200 Active Brake Assist ........................ 205 Brakes .............................................. 196 Collision warning (red) ................. 205 EBD ................................................... 200 ESP® (yellow) .................................. 201 High-voltage battery .................... 208 Lane Keeping Assist ...................... 206 Overview ........................................... 36 Parking brake ................................. 196 PASSENGER AIR BAG ........................ 43 PASSENGER AIRBAG OFF ................ 194 Seat belt .......................................... 193 Steering ........................................... 205 Tyre pressure monitor .................. 202 Warning triangle .................................. 177 Wheel bolt tightening torque .............. 165 Wheels Changing a wheel .......................... 162 Checking ......................................... 161 Cleaning .......................................... 171 Fitting a new wheel ....................... 165 Important safety notes ................. 161 Removing a wheel .......................... 163 Snow chains .................................... 168 Storing ............................................ 166 Tightening torque ......................... 165 Windowbag .............................................. 41 Windows Cleaning .......................................... 172 see Side windows Windscreen Demisting (automatic climate control) ............................................. 98 Windscreen washer fluid see Windscreen washer system Windscreen washer system Important safety notes ................. 161 Topping up ..................................... 161 Windscreen wipers Intermittent wipe ............................ 92 Problem (malfunction) .................. 193 Rain sensor ....................................... 92 Rear window wiper .......................... 92 Replacing the wiper blades .......... 169 Switching on/off .............................. 92 Wiping with washer fluid ............... 92 Wing see Front wheel arch Winter driving General notes ................................... 77 Winter operation Slippery road surfaces .................... 77 Snow chains .................................... 168 Winter tyres M+S tyres ........................................ 168 Wiper blades Cleaning .......................................... 172 Replacing (on the rear window) ... 170 Replacing (windscreen) ................ 169 Workshop see Qualified specialist workshop Index 21

Protecting the environment

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 30 · Applies to: 453

General notes H Environmental note Daimler's declared policy is one of com- prehensive environmental protection. Our objectives are to use the natural resources which form the basis of our existence on this planet sparingly and in a manner which takes the requirements of both nature and humanity into consid- eration. You too can help to protect the environ- ment by operating your vehicle in an environmentally-responsible manner. Energy consumption and the rate of engine, transmission, brake and tyre wear depend on the following factors: Roperating conditions of your vehicle Ryour personal driving style You can influence both factors. Therefore, please bear the following in mind: Operating conditions: Robserve the correct tyre pressure. Rdo not carry any unnecessary weight in the vehicle Rremove the roof rack once you no lon- ger need it. Ra regularly serviced vehicle will con- tribute to environmental protection. You should therefore adhere to the ser- vice intervals. Rall maintenance work should be carried out at a qualified specialist workshop. Personal driving style: Rdrive carefully and maintain a safe distance from the vehicle in front. Ravoid frequent, sudden acceleration and braking. Rmonitor the vehicle's energy consump- tion. High-voltage battery H Environmental note Have a defective high-voltage battery disposed of in an environmentally- responsible manner. Contact a specialist workshop, which is qualified for smart EQ fortwo, smart EQ fortwo cabrio or smart EQ forfour, and has the necessary special skills and tools to carry out the work required. smart recommends a smart centre for this. Returning an end-of-life vehicle EU countries only: smart will take back your end-of-life vehi- cle for environment-friendly disposal in accordance with the European Union (EU) End-Of-Life Vehicles Directive. A network of vehicle take-back points and dismantlers has been established for you to return your vehicle. This makes an impor- tant contribution to closing the recycling circle and conserving resources. You can leave it any of these points free of charge. For further information about the recycling and disposal of end-of-life vehicles, and the take-back conditions, please visit the national smart website for your country. smart genuine parts H Environmental note Daimler AG also supplies reconditioned assemblies and parts which are of the same quality as new parts. For these, the same warranty applies as for new parts. ! Airbags and seat belt tensioners, as well as control units and sensors for these restraint systems, may be installed in the following areas of your vehicle: Rdoors Rdoor pillars Rdoor sills Rseats 22

Introduction.

Rdashboard

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 31 · Applies to: 453

Rinstrument cluster Rcentre console Do not install accessories such as audio systems in these areas. Do not carry out repairs or welding. You could impair the operating efficiency of the restraint sys- tems. Have accessories retrofitted at a quali- fied specialist workshop. Only smart genuine parts or parts of the same quality may be used. Additionally, only tyres, wheels and accessories approved for the specific type of vehicle may be used. Always specify the vehicle identification number (VIN) when ordering smart genuine parts. Using parts, tyres, wheels or safety-rele- vant equipment not approved by smart could endanger the operating safety of the vehicle. Safety-relevant systems, e.g. the brake system, could malfunction. smart tests genuine parts and conversion parts and accessories that have been spe- cifically approved for your vehicle for their reliability, safety and suitability. Despite ongoing market research, smart is unable to assess other parts. smart therefore accepts no responsibility for the use of such parts in smart vehicles, even if they have been officially approved or independently approved by a testing centre. In Germany, certain parts are only offi- cially approved for installation or modifi- cation if they comply with legal require- ments. This also applies to some other countries. All genuine smart parts meet the approval requirements. The use of non- approved parts may invalidate the vehicle's general operating permit. The following situations will invalidate the operating permit: RThe vehicle type changes from that sta- ted in the vehicle's operating permit, due to modifications. ROther road users are likely to be endan- gered. REmissions or noise characteristics deteri- orate. Warranty for the smart Audio-System and smart Media-System The smart sales organisation provides a warranty for a period of 24 months without a kilometre limit for the smart Audio-Sys- tem and the smart Media-System. The warranty issuer is the respective sales organisation in the country in which the accessory or replacement part was pur- chased (see list in the service booklet). Vehicle equipment This Owner's Manual describes all models and all standard and optional equipment available for the vehicle at the time of pub- lication of this Owner's Manual. Country- specific differences are possible. Please note that the vehicle equipment may differ from certain descriptions and illustrations provided in this manual. This is also the case for systems and functions relevant to safety. The vehicle's original purchase contract documentation contains a list of all the systems in your vehicle. Please contact any smart Centre to help clarify any questions related to the vehicle equipment and oper- ation. Declarations of conformity Electromagnetic compatibility The electromagnetic compatibility of the vehicle components has been checked and certified according to the currently valid version of UNECE standard UN-R10. Declaration of conformity for two-way radio systems according to Directive 2014/53/EU The components of the vehicle that receive and/or transmit radio waves are compliant with the basic requirements and all other relevant regulations stipulated by Directive 2014/53/EU.

Introduction. 23 Z

You can obtain further information from

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 32 · Applies to: 453

any Mercedes-Benz Service Centre. In the following, you will find the addresses of radio component manufacturers which, due to their size or nature, do not allow this information to be indicated on the equip- ment. Tyre pressure monitor sensors: Schrader Electronics Ltd., 11 Technology Park, Belfast Road, Antrim BT41 1QS, Northern Ireland Transponder ring: Visteon Electronics, 04 Rue Nelson Mandela, Zone Industrielle Borj Cedria, 2055 Bir El Bey, Tunisia Remote Keyless Entry: Visteon Electronics, 04 Rue Nelson Mandela, Zone Industrielle Borj Cedria, 2055 Bir El Bey, Tunisia Alps Electric Europe GmbH, Ohmstraße 4, D-85716 Unterschleißheim, Germany Radio: Visteon Electronics, 04 Rue Nelson Mandela, Zone Industrielle Borj Cedria, 2055 Bir El Bey, Tunisia Continental Automotive, 1 Rue de Clairefon- taine, 78120 Rambouillet, France Mobile communication and telemetry: Ficosa Internationnal, Gran Via de Carles III 98, 08028 Barcelona, Spain Radar: Robert Bosch GmbH, Daimlerstraße 6, 71229 Leonberg, Germany Windscreen unit: car2go Group GmbH, Fasanenweg 15-17, 70771 Leinfelden-Echterdingen, Germany Wireless vehicle components (Mexico) The following information applies to all components of the vehicle and the informa- tion systems and communication devices integrated into the vehicle which receive and/or transmit radio waves: Operation of this device is dependent on the following two conditions: (1) this device or this equipment must not cause any interference, and (2) this device must toler- ate the reception of interference, including interference that may cause undesired operating behaviour. TIREFIT kit Copy of the original declaration of conform- ity: VERIFICATION OF EMC COMPLIANCE Verification No.: GZEM161000740001V Applicant: ITW Global Tire Repair Europe GmbH Address of Manufac- turer: No. 11 Kuiqing Road, Qingxi Town, Dongguan City, China. Factory: The same as manufacturer Address of Factory: The same as manufacturer Product Description: Air compressor Model No: AEROB-DP Sufficient samples of the product have been tested and found to be in conformity with Test Standards: EN 50498:2010 As shown in the Test Report Number(s): GZEM161000740001 This verification of EMC Compliance has been granted to the applicant based on the results of the tests, performed by labora- tory of SGS-CSTC Standards Technical Serv- ices Co., Ltd. on the sample of the above- mentioned product in accordance with the provisions of the relevant specific stand- ards under Directive 2014/30/EU. The CE mark as shown below can be used, under the responsibility of the manufacturer, after completion of an EU Declaration of Conformity and compliance with all rele- vant EU Directives. Date: 2016-11-10 Signature: Kobe Jian 24

Introduction.

Type of radio device in the vehicle

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 33 · Applies to: 453

Frequency range Technology Transmis- sion output/ magnetic field strength 125 kHz (119 kHz - 135 kHz) Trans- ponder ring ≤ 42 dBμA/m at 10 m 13.553 MHz - 13.567 MHz Windscreen unit (vehi- cle access system for Car2Go) ≤ 42 dBμA/m at 10 m 433 MHz (433.05 MHz - 434.79 MHz) Remote Keyless Entry Tyre pres- sure moni- tor ≤ 10 mW e.r.p. 2.4 GHz ISM waveband (2400 MHz - 2483.5 MHz) Bluetooth® ≤ 100 mW e.i.r.p. 76 GHz - 77 GHz 76 GHzRadar ≤ 55 dBm peak e.i.r.p. Operating safety Important safety notes G WARNING If you do not have the prescribed service/ maintenance work or necessary repairs carried out, this could result in malfunc- tions or system failures. There is a risk of an accident. Always have the prescribed service/ maintenance work as well as necessary repairs carried out at a qualified special- ist workshop. G WARNING If you operate information and communi- cation equipment integrated in the vehi- cle when driving, you could be distracted from the traffic situation. This could also cause you to lose control of the vehicle. There is a risk of an accident. Only operate this equipment when the traffic situation permits. If you cannot be sure of this, stop the vehicle paying attention to road and traffic conditions and operate the equipment with the vehi- cle stationary. G WARNING Modification to electronic components, their software or wiring could impair their function and/or the function of other networked components. In particu- lar, systems relevant to safety could also be affected. As a result, these may no lon- ger function properly and/or jeopardise the operating safety of the vehicle. There is an increased risk of accident and injury. You must not tamper with wiring, elec- tronic components, or their software. You should have all work on electrical and electronic components carried out at a qualified specialist workshop. If you fail to adapt your driving style or if you are inattentive, the driving safety sys- tems can neither reduce the risk of accident nor override the laws of physics. Driving safety systems are merely aids designed to assist driving. The driver is responsible for keeping a safe distance from the vehicle in front, for vehicle speed, for braking in good time and for staying in lane. The driving style should always be adjusted to the cur- rent street and weather conditions. An ade- quate safe distance must be maintained at all times. You must observe the legal requirements for the country in which you are currently driving when operating information sys- tems and communication devices integra- ted into the vehicle. If you make any changes to the vehicle electronics, the general operating permit is rendered invalid.

Introduction. 25 Z

! There is a risk of damage to the vehicle

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 34 · Applies to: 453

if: Rthe vehicle becomes stuck, e.g. on a high kerb or an unpaved road Ryou drive too fast over an obstacle, e.g. a kerb, speed bumps or a pothole in the road Ra solid object impacts with the vehicle underside or chassis component In situations like this, the body, the underbody, chassis parts, wheels or tyres could be damaged without the damage being visible. Components damaged in this way can unexpectedly fail or, in the case of an accident, no longer withstand the strain they are designed to. In such situations, have the vehicle checked and repaired immediately at a qualified specialist workshop. If on con- tinuing your journey you notice that driving safety is impaired, pull over and stop the vehicle immediately, paying attention to road and traffic conditions. In such cases, consult a qualified spe- cialist workshop. The multimedia device is equipped with technical provisions to protect it against theft. Further information is available from any smart Centre. The functionality of a roof aerial (radio, DAB) may be impaired if roof carriers are used. Metallised retrofit film on windows may also affect radio and GPS reception and have a negative impact on all other aerial functions in the vehicle interior. Diagnostics connection The diagnostics connection is only inten- ded for the connection of diagnostic equip- ment at a qualified specialist workshop. G WARNING If you connect equipment to a diagnostics connection in the vehicle, it may affect the operation of vehicle systems. As a result, the operating safety of the vehicle could be affected. There is a risk of an accident. Only connect equipment to a diagnostics connection in the vehicle, which is approved for your vehicle by Mercedes- Benz. G WARNING Objects in the driver's footwell may restrict the clearance around the pedals or block a depressed pedal. This jeopard- ises the operating and road safety of the vehicle. There is a risk of an accident. Stow all objects securely in the vehicle so that they do not get into the driver's footwell. Always fit the floormats securely and as prescribed in order to ensure that there is always sufficient room for the pedals. Do not use loose floormats and do not place several floor- mats on top of one another. ! If the engine is switched off and a device is connected to a diagnostic con- nection, the battery may become dis- charged. Qualified specialist workshop A qualified specialist workshop has the necessary special skills, tools and qualifi- cations to correctly carry out any neces- sary work on your vehicle. This particularly applies to work relevant to safety. Observe the information contained in the Service Booklet. Always have the following work carried out on your vehicle at a smart Centre: Rwork relevant to safety Rservice and maintenance work Rrepair work Rmodifications, installations and conver- sions Rwork on electronic components Rreplacing the 12 V battery within the prescribed interval, at the latest every three years You can obtain current information con- cerning the servicing of your vehicle at any time from a qualified specialist workshop, e.g. a smart Centre. 26

Introduction.

Replacing the 12 V battery

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 35 · Applies to: 453

Observe the notes on the 12 V battery. smart recommends that you have the 12 V battery replaced at a qualified specialist workshop, e.g. at a smart Centre. If you intend to replace the battery your- self, please observe the following points: Ralways replace a defective battery with a battery which fulfils the specific vehicle requirements The vehicle is equipped with either an AGM (Absorbent Glass Mat) technology battery or a lithium-ion battery. Full vehicle functionality is only guaranteed with a battery of the same technology. smart recommends that you only use bat- teries of the same technology which have been tested and approved for your vehi- cle. Rcarry over detachable parts, e.g. the breather hose, angled connecting piece or terminal cover from the battery which is being replaced Rmake sure that the breather hose is always connected to the original opening on the battery side Fit any existing or supplied cell caps. Otherwise, gases or battery acid may leak. Rmake sure that the detachable parts are reconnected in the same way Vehicle registration smart may ask its smart Centres to carry out technical inspections on certain vehi- cles. The quality or safety of the vehicle is improved as a result of the inspection. smart is only able to notify the vehicle owner about vehicle inspections if smart has the vehicle registration data. In the following cases, it is possible that a vehicle has not yet been registered in the owner's name: Rthe vehicle was not purchased at an authorised specialist dealer Rthe vehicle has not yet been examined at a smart Centre smart recommends registering the vehicle in a smart Centre. Notify smart as soon as possible if there is a change of address or if ownership of the vehicles changes. This can be done at a smart Centre, for example. High-voltage electrical system Danger of electric shock G DANGER The vehicle's high-voltage electrical sys- tem is under high voltage. If you modify components in the vehicle's high-voltage electrical system or touch damaged com- ponents, you may suffer an electric shock. The components in the vehicle's high-voltage electrical system may be damaged in an accident, although the damage is not visible. There is a risk of fatal injury. Never carry out modifications to the high-voltage electrical system. Never touch damaged components of the high-voltage electrical system. Do not touch high-voltage components after an accident. Have the vehicle transported away after an accident. Have the high-voltage electrical system checked at a qualified specialist work- shop. All of the vehicle's high-voltage electrical system components are marked with yellow warning stickers which warn you of the dangers of high voltages. The cables of the

Introduction. 27 Z

vehicle's high-voltage electrical system are

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 36 · Applies to: 453

orange in colour. Observe the following before carrying out general work such as replacing a bulb or checking the coolant level: Rthe ignition must be switched off Rthe charging cable for charging the high- voltage battery must not be connected Automatically switching off the vehi- cle's high-voltage electrical system In order to prevent anyone coming into contact with high voltage, the high-voltage electrical system is generally switched off automatically in the following cases: Rthe restraint systems are activated in the event of an accident Ran electrical short circuit is detected in the vehicle's high-voltage electrical sys- tem Ran electrical connection in the vehicle's high-voltage electrical system is discon- nected High-voltage battery G WARNING In the event of a vehicle fire, the internal pressure of the high-voltage battery could exceed a critical value. In this case, flammable gas escapes through a vent valve in the vehicle's underbody. The gas could ignite. There is a risk of injury. If there is an unusual odour, smoke or burn marks, stop charging immediately. Leave the danger area immediately. Secure the danger area at a suitable dis- tance. Call the fire service. G WARNING If the housing of the high-voltage bat- tery has been damaged, electrolyte and gases may leak out. These are poisonous and caustic. There is a risk of injury. Avoid contact with the skin, eyes or clothing. Immediately rinse electrolyte splashes off with water and seek medical attention straight away. Correct use If warning stickers are removed, you may fail to recognise certain dangers. Leave warning stickers in place. The following are important sources of information in regard to vehicle use: Rsafety notes in this Owner's Manual Rtechnical data in this Owner's Manual Rtraffic rules and regulations Rlaws and safety standards pertaining to motor vehicles Implied warranty ! Follow the instructions in this manual about the proper operation of your vehi- cle as well as about possible vehicle damage. Damage to your vehicle that ari- ses from culpable contraventions against these instructions is not covered either by the smart implied warranty or by the New or Used-Vehicle Warranty. Information on the REACH Regulation EU and EFTA countries only: The REACH Regulation (Regulation (EU) no. 1907/2006, Article 33) provides for an obli- gation to inform for Substances of Very High Concern (SVHCs). Daimler AG acts to the best of its knowledge to prevent the use of SVHCs, and to enable the customer to handle these substances safely. There are SVHCs known to Daimler AG, according to supplier information and internal product information, found in individual components of this vehicle in quantities of over 0.1 percent by weight. You can obtain further information at the following addresses: Rhttp://www.daimler.com/reach (German version) Rhttp://www.daimler.com/reach/en (Eng- lish version) 28

Introduction.

QR codes for rescue card

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 37 · Applies to: 453

The QR code is affixed on the charge socket flap and on the door pillar (B-pillar), on the opposite side. In the event of an accident, rescue services can use the QR code to quickly determine the corresponding res- cue card for a vehicle. The current rescue card contains the most important informa- tion about the vehicle in compact form, such as the routing of the electric cables. Further information: http://www.mercedes- benz.de/qr-code Data stored in the vehicle Electronic control units Your vehicle is equipped with electronic control units. Some of them are necessary for your vehicle to function safely, some provide support when driving (driver assis- tance systems). In addition, your vehicle offers comfort or entertainment functions which are also made possible with elec- tronic control units. Electronic control units contain data mem- ories which can permanently or tempora- rily store technical information on vehicle condition, component stress, service requirements as well as technical incidents and faults. This information generally documents the condition of a component, a module, a sys- tem or of the environment such as: Roperating states of system components (e.g. fluid levels, battery status, tyre pressure) Rstatus messages of the vehicle or its individual components (e.g. wheel revo- lutions/speed, deceleration in movement, lateral acceleration, display of seat belts fastened) Rmalfunctions and defects in important system components (e.g. the lights and brakes) Rinformation on incidents in which the vehicle is damaged Rreactions of the systems in specific driv- ing situations (e.g. deployment of an air- bag, use of stability control systems) Rambient conditions (e.g. temperature, rain sensor) In addition to the provision of control unit functions, this data serves to detect and rectify faults as well as to optimise vehicle functions by the manufacturer. Most of this data is volatile and is only processed in the vehicle itself. Only a small proportion of the data is stored in event or error memo- ries. When service work is carried out on your vehicle, the technical data from the vehicle can be read out by service network staff (e.g. workshops, manufacturers) or third parties (e.g. breakdown services). Service work is, for example, repair work, mainte- nance, warranty claims and quality assur- ance measures. The data is read out via the legally prescribed connection for the diag- nostics connection in the vehicle. The respective workshop of service network or third parties collect, process and use the data. The data documents technical states of the vehicle, help in finding errors and in improving quality and are transferred to the manufacturer if necessary. In addition, the manufacturer is subject to product lia- bility. For this purpose, the manufacturer requires technical data from vehicles. Error memories in the vehicle can be reset by a service outlet during repairs or service work. Depending on the equipment selected, you can enter data in comfort and infotainment functions of the vehicle. This includes, for example: Rmultimedia data, such as music, films or photos for playback in an integrated multimedia system Raddress book data for use in an integra- ted hands-free system or an integrated navigation system Rnavigation destinations entered Rdata on the use of Internet services This data can be saved locally in the vehi- cle or it is located on a device which you have connected to the vehicle (e.g. smart- phone, USB memory stick or MP3 player). If this data is saved in the vehicle, you can delete it at any time. Transfer of this data

Introduction. 29 Z

to third parties only occurs at your request,

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 38 · Applies to: 453

especially as part of online services according to the settings you have selected. You can save comfort settings/individuali- sation in the vehicle and change them at any time. Depending on the equipment, these include, for example: Rsettings for seat and steering wheel posi- tions Rsuspension and air-conditioning settings Rindividualisation such as interior light- ing If your vehicle is suitably equipped, you can connect your mobile phone or another mobile end device with the vehicle. You can operate these devices via the control ele- ments integrated in the vehicle. Images and sound from the mobile phone can played back via the multimedia system. At the same time, certain information is transfer- red to your mobile phone. Depending on the type of integration, this can include: Rgeneral vehicle status Rposition data This allows the use of selected mobile phone apps, e.g. navigation or music play- back. There is no further interaction between mobile phone and vehicle; in par- ticular there is no active access to vehicle data. The provider of the app being used determines how the data may be further processed. Which settings you can adjust, if any, depends on the specific app and the operating system of your mobile phone. Online services Wireless network connection If your vehicle has a wireless network con- nection, this will permit the exchange of data between your vehicle and further sys- tems. The wireless network connection is enabled by a transmission and reception device belonging to the vehicle or via mobile end devices (e.g. mobile phones) you bring into the vehicle. Online functions can be used via this wireless network connec- tion. These include online services and applications/apps, which are provided by the manufacturer or by other providers. Manufacturer's own services Regarding online services of the manufac- turer, the individual functions are descri- bed by the manufacturer in a suitable place (e.g. Owner's Manual, the manufacturer's website) along with the relevant data pro- tection information. Personal identification data may be used to provide online serv- ices. The data exchange for this takes place via a secure connection, e.g. with the man- ufacturer's IT systems intended for the purpose. The collecting, processing, and use of personal identification data beyond the provision of services occurs exclusively on the basis of a legal permit or after due consent. Generally, you can enable or disable the services and functions (which sometimes have associated costs). In some cases, this also applies to the whole data connection of the vehicle. Excluded from this are special legally prescribed functions and services. Services of third parties If it is possible to use online services from other providers, these services are the responsibility of the provider in question and subject to that provider's data protec- tion conditions and terms of use. The man- ufacturer has no influence on the contents exchanged whilst using these services. Please ask the respective service provider for details on the type, extent and purpose of the collection and use of personal data in the context of third party services. Copyright information Information on licences for Free and Open- Source software used in the vehicle and its electronic components is available at: http://www.mercedes-benz.com/opensource and on the CD provided. 30

Introduction.

Cockpit

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 39 · Applies to: 453

Function Page : Charge level display 74 Power display 74 ; Instrument cluster 36 = Horn ? Instrument cluster multi- function lever 110 Windscreen wipers combi- nation switch 92 A Automatic locking feature 94 Hazard warning lamps 175 B Overhead control panel 34 C smart Audio-System 115 smart Media-System 123 Function Page D Climate control system control panel 97 E Ignition lock 69 F Control panel for: Lane Keeping Assist 78 Parking aid 105 Acoustic presence indica- tor 72 Headlamp range control 90 G Light combination switch 89 Cockpit 31

At a glance.

Multifunction steering wheel

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 40 · Applies to: 453

Function Page : Colour display of the instrument cluster 109 Monochrome display of the instrument cluster 109 ; smart Audio-System 115 smart Media-System 123 = Only for instrument clus- ter with colour display: WX Adjusts the vol- ume 123 Switches voice-oper- ated control on or off and accepts or ends a call 123 ? ® Increases or stores the current speed 79 g Decreases current speed 79 Function Page A ° Calls up the last speed stored 80 B ± Interrupts cruise control or the limiter 79 C ¯ Activates cruise con- trol 79 ^ Deactivates cruise control or the limiter 80 È Activates limiter 79 D Only for instrument clus- ter with colour display: 9: Scrolls through menus 110 a Confirms the selec- tion 112 32 Multifunction steering wheel

At a glance.

Centre console with drawer

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 41 · Applies to: 453

Function Page : Cup holders 152 Ashtray 100 ; Drawer 152 = Coin holder Opens and closes the fold- ing top 96 ? Selector lever 71 A Parking brake 70 Function Page B Cigarette lighter 100 12 V socket 101 C smart Media-System: AUX port, USB port and SD card slot 123 D Cup holders 152 E Selector lever indicator 71 F ECO mode 74 Centre console with drawer 33

At a glance.

Overhead control panel

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 42 · Applies to: 453

Function Page : Left-hand reading lamp 91 ; Interior lighting 91 = Right-hand reading lamp 91 Function Page ? PASSENGER AIRBAG indi- cator lamps 43 Rear seat belt status indi- cator 41 A Rear-view mirror 34 Overhead control panel

At a glance.

Door control panel

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 43 · Applies to: 453

Function Page : Opens the door 94 ; Adjusts the exterior mir- rors 67 Function Page = Opens and closes the side windows 96 Door control panel 35

At a glance.

Displays shown in the instrument cluster and the display

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 44 · Applies to: 453

Function Page : Speedometer ; Display = Warning and indicator lamps C Doors or tailgate 192 7 Seat belts 193 6 Restraint system 194 þ Drive diagnostics 197 J Brakes 196 ! ABS 200 ÷ ESP® 61 h Tyre pressure monitor 202 D Power steering 205 · Distance warning signal ^ Forward collision warning Function Page à Lane Keeping Assist 206

12 V battery 208 R Rear foglamp 90 O Foglamps 90 K Main-beam headlamps 89 L Dipped-beam headlamps 89 T Side lamps 90 è Charging cable 197 ¯ Cruise control 207 È Limiter 207 b Brake lights, rain or light sensors 209 ¯ ° Next service due date 197 õ READY indicator 208 36 Displays shown in the instrument cluster and the display

At a glance.

Occupant safety

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 45 · Applies to: 453

Restraint system Protection provided by the restraint system The restraint system includes the following components: RSeat belt system RAirbags RChild restraint system RChild seat securing systems The restraint system can reduce the risk of vehicle occupants coming into contact with parts of the vehicle's interior in the event of an accident. In the event of an accident, the restraint system can also reduce the forces to which the vehicle occupants are subjected. A seat belt can only provide maximum pro- tection when worn correctly. Depending on the type of accident detected, seat belt ten- sioners and/or airbags may supplement a correctly worn seat belt. Not every accident will trigger the seat belt tensioners and/or deploy the airbags. In order for the restraint system to provide the intended level of protection, each vehi- cle occupant must observe the following information: Rfasten the seat belt correctly. Rbe in an almost upright position with the back against the backrest. Rsit with feet resting on the floor, if possi- ble. Ralways secure persons under 1.50 m tall in an additional restraint system suita- ble for this vehicle. However, no system available today can completely eliminate injuries and fatalities in every accident. In particular, the seat belt and airbag generally do not protect against objects penetrating the vehicle from the outside. The risk of injuries due to a deployed airbag also cannot be com- pletely eliminated. Limited protection from restraint sys- tem G WARNING If the restraint system is modified, it may no longer work as intended. The restraint system may then not perform its inten- ded protective function by failing in an accident or triggering unexpectedly, for example. There is an increased risk of injury, possibly even fatal. Never modify parts of the restraint sys- tem. Do not attempt to modify the wiring as well as electronic components or their software. If it is necessary to adjust the vehicle to accommodate a person with disabilities, contact a qualified specialist workshop. smart recommends that you use driving aids which have been approved specifically for your vehicle by smart. Preparing the restraint system for operation When the ignition is switched on, the restraint system warning lamp lights up 6 during the self-check. It goes out no later than a few seconds after the vehicle is started. The components of the restraint system are then in operational readiness. Malfunctioning restraint system A malfunction has occurred in the restraint system if: RWhen the ignition is switched on, the 6 restraint system warning lamp does not light up. RWhile driving, the 6 restraint system warning lamp remains lit or lights up repeatedly. If the restraint warning system is faulty, the vehicle's high-voltage electrical system may not be deactivated as intended in the event of an accident. G DANGER If the restraint system is malfunctioning, restraint system components may be Occupant safety 37

Safety. Z

triggered unintentionally or may not

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 46 · Applies to: 453

deploy as intended during an accident. This may affect the seat belt tensioner or airbag, for example. Furthermore, in the event of an accident, the vehicle's high- voltage electrical system may not be deactivated as intended. You may be electrocuted if you touch the damaged components of the vehicle's high-voltage electrical system. This poses an increased risk of injury or even fatal injury. Have the restraint system checked and repaired immediately at a qualified spe- cialist workshop. After an accident, switch off the ignition immediately and remove the key from the ignition lock. Restraint system function during an accident The way the restraint system responds depends on the severity of the impact detected and the apparent type of accident: RHead-on collision RRear impact RSide impact ROverturn1 The activation threshold for the restraint system components is determined based on the analysis of the sensor values measured at various points in the vehicle. This proc- ess is pre-emptive in nature. The trigger- ing process of the restraint system compo- nents should take place in good time at the start of the collision. Factors which can only be seen and meas- ured after a collision has occurred do not play a decisive role in the deployment of an airbag, nor do they provide an indication of airbag deployment. The vehicle may be deformed significantly without an airbag being deployed. This is the case if only parts which are relatively easily deformed are affected and the rate of vehicle deceleration is not high. Con- versely, an airbag may be deployed even though the vehicle suffers only minor deformation. If, for instance, very rigid vehicle parts such as longitudinal body members are hit, the rate of vehicle decel- eration may be sufficient. The restraint system components can be activated or triggered independently of each other: Component Detected trigger situation Belt tensioners Head-on collision, rear impact, side impact, overturn1 Driver's airbag, front-passenger front airbag and kneebag Head-on collision Sidebag Side impact Windowbag Side impact, over- turn1, head-on col- lision G WARNING After the airbag deploys, the airbag parts are hot. There is a risk of injury. Do not touch the airbag parts. Have a deployed airbag replaced at a qualified specialist workshop as soon as possible. i smart recommends that you have the vehicle towed to a qualified specialist workshop after an accident. Take this into account, particularly if a seat belt tensioner was triggered or an airbag was deployed. If the belt tensioners are triggered or an airbag is deployed, you will hear a bang, and a small amount of powder may also be released: RThe bang will not usually affect your hearing. RIn general, the powder released is not hazardous to health but may cause short- term breathing difficulties to persons suffering from asthma or other pulmo- nary conditions. 1 Only for certain countries. 38 Occupant safety

Safety.

Provided it is safe to do so, leave the

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 47 · Applies to: 453

vehicle immediately or open the window in order to prevent breathing difficulties. Seat belts Protection provided by seat belts Always fasten seat belts correctly before commencing your journey. A seat belt can only provide maximum protection when worn correctly. G WARNING If the seat belt is worn incorrectly, it cannot perform its intended protective function. Furthermore, an incorrectly worn seat belt can cause additional inju- ries, e.g. in the event of an accident, heavy braking or sudden changes of direction. There is an increased risk of injury, possibly even fatal. Always ensure that all vehicle occupants have their seat belts fastened correctly and are sitting properly. Always observe the notes on correct driv- er's seat position (Y page 63) and seat adjustment (Y page 64). In order for the correctly worn seat belt to provide the intended level of protection, each vehicle occupant must observe the following information: Rthe seat belt must not be twisted and must fit tightly and snugly across the body. Rthe seat belt must be routed across the centre of the shoulder and as low down across the hips as possible. Rthe shoulder section of the belt should not touch your neck nor be routed under your arm or behind your back. Ravoid wearing bulky clothing, e.g. a win- ter coat. Rpress the lap belt down into your hip joints and pull taut by the shoulder sec- tion of the belt. The lap belt must never be routed across your stomach or abdo- men. Rnever route the seat belt across sharp, pointed, abrasive or fragile objects. Ronly one person per seat belt. Infants and children must never travel sitting on the lap of a vehicle occupant. Rnever secure objects with a seat belt if the seat belt is also being used by one of the vehicle's occupants. Always observe the notes on "Loading the vehicle" for securing objects, luggage or loads (Y page 153). Also make sure that objects are never placed between an occupant and the seat, e.g. a cushion. If children are travelling in the vehicle, be sure to observe the instructions and safety notes on "Children in the vehicle" (Y page 44). Limited protection from seat belts G WARNING The seat belt does not offer the intended level of protection if you have not moved the backrest to an almost vertical posi- tion. When braking or in the event of an accident, you could slide underneath the seat belt and sustain abdomen or neck injuries, for example. This poses an increased risk of injury or even fatal injury. Adjust the seat properly before beginning your journey. Always ensure that the backrest is in an almost vertical position and that the shoulder section of your seatbelt is routed across the centre of your shoulder. G WARNING Persons under 1.50 m tall cannot wear the seat belts correctly without an additional suitable restraint system. If the seat belt is worn incorrectly, it cannot perform its intended protective function. Further- more, an incorrectly worn seat belt can cause additional injuries, e.g. in the event of an accident, heavy braking or sudden changes of direction. There is an increased risk of injury, possibly even fatal. Occupant safety 39

Safety. Z

Always secure persons less than 1.50 m

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 48 · Applies to: 453

tall in additional suitable restraint sys- tems. G WARNING Seat belts may not be used in the follow- ing situations in particular: Rthe seat belt is damaged, has been modified, is very dirty, bleached or dyed. Rthe seat belt buckle is damaged or very dirty. Rmodifications have been made to the seat belt tensioner, seat belt anchorage or seat belt retractor. Seat belts may sustain non-visible dam- age in an accident, e.g. due to glass splinters. Modified or damaged seat belts can tear or fail, for example in the event of an accident. Modified seat belt ten- sioners may be triggered unintentionally or may not function as intended. There is an increased risk of injury, possibly even fatal. Never modify seat belts, seat belt ten- sioners, seat belt anchorages and inertia reels. Ensure that seat belts are not dam- aged or worn and are clean. After an acci- dent, have the seat belts checked imme- diately at a qualified specialist work- shop. smart recommends that you only use seat belts which have been approved specifi- cally for your vehicle by smart. G WARNING Pyrotechnical belt tensioners which have been triggered are no longer operational and therefore cannot protect as intended. There is an increased risk of injury, pos- sibly even fatal. Have pyrotechnic belt tensioners which have been triggered replaced at a quali- fied specialist workshop immediately. smart recommends that you have the vehi- cle towed to a qualified specialist workshop after an accident. ! Make sure that the seat belt is fully rol- led up. Otherwise, the seat belt or belt tongue will be trapped in the door or in the seat mechanism. This could damage the door, the door trim panel and the seat belt. Damaged seat belts can no longer fulfil their protective function and must be replaced. Visit a qualified specialist workshop. Fastening and adjusting the seat belts If the seat belt is pulled quickly or sud- denly, the inertia reel locks. The belt strap cannot be pulled out further. ! If the co-driver's seat is not occupied, do not engage the seat belt tongue in the buckle on the co-driver's seat. Otherwise, in the event of an accident the belt ten- sioner could be triggered in addition to other systems and would need to be replaced. X Always insert seat belt tongue ; into belt buckle : that belongs to the seat. X Slide the belt sash guide into the required position. To raise: slide upwards at the ring. To lower: press the belt guide release and slide downwards at the ring. X Make sure that the belt sash guide is engaged. Releasing the seat belts X Press the release button in the belt buckle and guide the seat belt back by the belt tongue. 40 Occupant safety

Safety.

Function of seat belt warning for the

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 49 · Applies to: 453

driver and front passenger

The 7 seat belt warning lamp in the

instrument display is a reminder that all

vehicle occupants must wear their seat

belts correctly.

In addition, a warning tone may sound.

The belt warning goes out as soon as the

driver and front-passenger fasten their

seat belts.

Function of rear seat belt status indica-

tor

Seat belt warning lamp ; Rear left-hand seat belt status indicator = Rear right-hand seat belt status indica- tor The rear seat belt status indicator informs you which rear seat belt is not fastened. You will recognise the status of the rear seat belt from the following colour: RRed – seat belt not fastened RGreen – seat belt fastened When you drive off and have reached a speed of approximately 10 km/h the lamps go out after approximately 30 seconds. Airbags Overview of airbags The installation location of an airbag is identified by the AIRBAG symbol. A deployed airbag can increase the level of protection provided to the vehicle occu- pant. AIRBAG Possible protection for: : Driver's kneebag Thigh, knee and lower leg ; Driver's air- bag Head and thorax = Front- passenger front airbag Head and thorax ? Windowbag Head A Sidebag Thorax and pelvis The front-passenger front airbag can be deployed in an accident only if the PASSENGER AIR BAG ON indicator lamp is lit. If the front-passenger seat is occupied, make sure both before and during the jour- ney that the status of the front-passenger front airbag is correct (Y page 43). Protection provided by the airbags Depending on the type of accident, an air- bag can supplement a correctly worn seat belt and provide added protection. Occupant safety 41

Safety. Z

G WARNING

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 50 · Applies to: 453

If you deviate from the correct seat posi- tion, the airbag cannot carry out its intended function and may even cause additional injuries if it is deployed. There is an increased risk of injury, possibly even fatal. To avoid risks, vehicle occupants must ensure the following points are followed: Rfasten the seat belt correctly. in par- ticular, make sure that the lap belt never runs over the stomach or abdo- men of pregnant women.. Rtake the correct seating position and keep as far away from the airbags as possible. Robserve the following information: Always make sure that there are no objects between the airbag and vehicle occupant. To avoid the risks resulting from the deployment of an airbag, each vehicle occupant must observe the following notes: RAdjust seats correctly before starting your journey and move the driver's and front passenger seat as far back as possi- ble. Always observe the information on the correct driver's seat position (Y page 63). ROnly hold onto the outside of the steering wheel rim. This allows the airbag to be fully deployed. RAlways lean against the backrest while driving. Do not lean forwards or against the door or side window. You may other- wise be in the deployment area of the airbags. RAlways keep your feet on the floor. Do not put your feet on the dashboard, for exam- ple. Your feet may otherwise be in the deployment area of the airbag. RWhen children are travelling in the vehi- cle, follow the related additional notes (Y page 44). RAlways properly stow and secure objects. Objects in the vehicle interior may limit an airbag's ability to function correctly. Each vehicle occupant must always make sure of the following: RThere are no people, animals or objects between the vehicle occupants and an airbag. RThere are no objects between the seat, the door and the door pillar (B-pillar). RNo hard objects, e.g. coat hangers, are hanging on the grab handles or coat hooks. RThere are no accessory parts, such as mobile navigation devices, mobile phones or cup holders, attached to the vehicle within the deployment area of an airbag, e.g. on the cockpit, on doors, side win- dows or side panelling. In addition, no connection cable, tension- ing strap or retainer belt may be routed or secured in the deployment area of an airbag. Always observe the accessory manufacturer's installation instructions, in particular the notes on a suitable place to fit the accessory. RNo heavy, sharp-edged or fragile objects are kept in the pockets of clothing. Store such objects in a suitable place. Limited protection from airbags G WARNING If you modify the cover of an airbag or affix objects such as stickers to it, the airbag can no longer perform its intended function. This poses an increased risk of injury. Never modify the cover of an airbag or affix objects to it. The installation location of an airbag is indicated by the AIRBAG symbol (Y page 41). G WARNING Unsuitable seat covers may obstruct or even prevent deployment of the airbags integrated into the seats. The airbags may then fail to protect the vehicle occu- pants as intended. There is an increased risk of injury, possibly even fatal. 42 Occupant safety

Safety.

Use only seat covers which have been

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 51 · Applies to: 453

specifically approved for the respective seat by smart. G WARNING Sensors to control the airbags are located in the doors. Modifications or work not performed correctly to the doors or door panelling, as well as damaged doors, can lead to the function of the sensors being impaired. The airbags might therefore not function properly any more. Conse- quently, the airbags cannot protect vehi- cle occupants as they are designed to do. This poses an increased risk of injury. Never modify the doors or parts of the doors. Always have work on the doors or door panelling carried out at a qualified specialist workshop. G WARNING An airbag that has been deployed once cannot provide any further protection and, in the event of an accident, can no longer perform its intended protective function. There is an increased risk of injury. Have the vehicle towed to a qualified specialist workshop to have the deployed airbag replaced. Have deployed airbags replaced immedi- ately. Status of the front passenger front air- bag Function of the PASSENGER AIR BAG indi- cator lamps The front-passenger front airbag can be enabled or disabled using the airbag-off switch in the instrument panel on the front-passenger side (Y page 54). The PASSENGER AIR BAG OFF and PASSENGER AIR BAG ON indicator lamps are part of the front-passenger front airbag deactivation system. The indicator lamps display the status of the front-passenger front airbag: RPASSENGER AIR BAG OFF lights up: the front-passenger front airbag is disabled. It will then not be deployed in the event of an accident. RPASSENGER AIR BAG ON lights up: the front-passenger front airbag is enabled. The front-passenger front airbag may deploy during an accident. If the front-passenger seat is occupied, make sure that the status of the front- passenger front airbag is correct depending on the situation both before and during the journey: RChildren in a child restraint system: whether the front-passenger front airbag should be enabled or disabled depends on the child restraint system fitted and the age and size of the child. Make sure that you observe the notes on "Children in the vehicle" (Y page 44). There you will also find instructions on backwards and for- wards-facing child restraint systems on the front-passenger seat. RAll other persons: the PASSENGER AIR BAG ON indicator lamp must be lit. The front- passenger front airbag is enabled. Be sure to observe the notes on "Seat belts" (Y page 39) and "Airbags" (Y page 41). There you can also find information on the correct seat position. Observe the information on the airbag deactivation system of the front-passenger front airbag (Y page 54). Occupant safety 43

Safety. Z

Travelling safely with children in the

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 52 · Applies to: 453

vehicle Observe carefully when children are travelling in the vehicle Be diligent i Be sure to observe the safety notes rele- vant to the situation. In doing so, you will be able to identify possible risks and avoid dangers when children are travel- ling in the vehicle (Y page 44). Bear in mind that negligence when secur- ing the child in the child restraint system may have serious consequences. Always be diligent and secure a child carefully before each journey. To improve protection for children younger than twelve years old and under 1.50 m in height, smart recommends you always observe the following notes: RAlways secure the child in a child restraint system suitable for your smart vehicle. RThe child restraint system must be appropriate to the age, weight and size of the child. RThe vehicle seat must be suitable for the child restraint system to be fitted (Y page 48). Accident statistics show that children secured on the rear seats are safer than children secured on front-passenger seats. For this reason, smart strongly advises that you fit a child restraint system to a rear seat. The generic term child restraint system The generic term child restraint system is used in this Owner's Manual. A child restraint system is, for example: Ra baby car seat Ra rearward-facing child seat Ra forward-facing child seat Ra child booster seat with a backrest and seat belt guides The child restraint system must be appro- priate to the age, weight and size of the child. Observing laws and regulations Always observe the legal requirements for using a child restraint system in the vehi- cle. Ensure that the child restraint system is approved in accordance with the valid test specifications and guidelines. Further information can be obtained at a qualified specialist workshop. smart recommends that you use a smart Centre. Use only approved child restraint sys- tems Only child restraint systems that meet the following UNECE standards are permitted for use in the vehicle: RUN-R44 RUN-R129 (i‑Size child restraint systems) Information about the approval categories for child restraint systems and details on the approval label on the child restraint system (Y page 48). Detecting risks, avoiding danger Securing systems for child restraint systems in the vehicle Only use the following securing systems for child restraint systems: Rthe ISOFIX or i‑Size securing rings Rthe vehicle's seat belt system Rthe Top Tether anchorages Preferably, fit an ISOFIX or i‑Size child restraint system. The risk of incorrectly fitting the child restraint system can be reduced by simply fitting it on the securing rings of the vehi- cle. When the child is secured using the seat belt integrated in the ISOFIX or i-Size child restraint system, be sure to observe the maximum permissible weight of the child and child restraint system together (Y page 51). 44 Travelling safely with children in the vehicle

Safety.

The advantage of a rearward-facing

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 53 · Applies to: 453

child restraint system Babies or infants should preferably travel in a suitable rearward-facing child restraint system. In this case, the child is seated in the opposite direction to the direction of travel and is facing backwards. Babies and infants have comparatively poorly developed neck muscles in relation to the size and weight of their head. A rear- ward-facing child restraint system can reduce the risk of injury to the cervical spine in an accident. Secure the child restraint system cor- rectly at all times G WARNING If the child restraint system is incor- rectly fitted on the seat position suitable for this purpose, it cannot perform its intended protective function. In the event of an accident, sharp braking or a sudden change in direction, the child may not be held securely. There is an increased risk of serious or even fatal injuries. Observe the manufacturer's installation instructions and the correct use for the child restraint system. Make sure that the entire surface of the child restraint system is resting on the seat surface. Never place objects under or behind the child restraint system, e.g. cushions. Only use child restraint systems with the original cover designed for them. Only replace damaged covers with genuine covers. Where possible, use child restraint systems recommended for Mercedes-Benz (Y page 46). G WARNING If the child restraint system is fitted incorrectly or is not secured, it can come loose in the event of an accident, heavy braking or a sudden change in direction. The child restraint system could be thrown about, striking vehicle occupants. There is an increased risk of injury, pos- sibly even fatal. Always fit child restraint systems prop- erly, even if they are not being used. Make sure that you observe the child restraint system manufacturer's installa- tion instructions. RBe sure to observe the installation and operating instructions provided by the manufacturer for the child restraint sys- tem being used as well as the vehicle- specific notes at all times: - Fitting an ISOFIX or i-Size child restraint system to the rear seat (Y page 51). - Securing the child restraint system with the seat belt on the rear seat (Y page 57). - Securing the child restraint system with the seat belt on the front- passenger seat (Y page 58). Observe the specific notes on rearward-facing and forward-facing child restraint systems (Y page 57). If the front-passenger seat is occupied, make sure that the status of the front- passenger front airbag is correct depending on the situation both before and during the journey (Y page 43). RObserve the warning labels in the vehicle interior and on the child restraint sys- tem. RAlso secure Top Tether, if available. Do not modify the child restraint sys- tem G WARNING If you modify a child restraint system or affix objects to it, e.g. toys or unsuitable accessories, the child restraint system may no longer function properly. This poses an increased risk of injury. Never modify a child restraint system. Only affix accessories which have been specially approved for this child restraint system by the child restraint system's manufacturer. Travelling safely with children in the vehicle 45

Safety. Z

smart recommends you use smart care

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 54 · Applies to: 453

products to clean child restraint systems recommended by smart. Only use child restraint systems which are not damaged G WARNING Child restraint systems or their securing systems that have been damaged or sub- jected to a load in an accident cannot perform their intended protective func- tion. In the event of an accident, sharp braking or a sudden change in direction, the child may not be held securely. There is an increased risk of serious or even fatal injuries. Immediately replace child restraint sys- tems that have been damaged or subjec- ted to a load in an accident. Have the child restraint securing systems checked in a qualified specialist workshop before fitting a child restraint system again. Avoiding direct sunlight G WARNING If the child restraint system is placed in direct sunlight, the parts could become very hot. Children could be suffer burns by touching these parts, in particular on the metallic parts of the child restraint system. There is a risk of injury. If you and your child leave the vehicle, always make sure that the child restraint system is not in direct sunlight. Cover it with a blanket, for example. If the child restraint system has been exposed to direct sunlight, leave it to cool down before securing the child in it. Never leave children unattended in the vehicle. Observe the following when stopping or parking G WARNING If children are left unattended in the vehicle, they could in particular: Ropen doors, thereby endangering other persons or road users. Rget out and be struck by oncoming traffic. Roperate vehicle equipment and become trapped, for example. In addition, the children could also set the vehicle in motion, for example by: Rreleasing the parking brake. Rchanging the transmission position. Ryou start the vehicle. There is a risk of accident and injury. Never leave children unattended in the vehicle. When leaving the vehicle, always take the key with you and lock the vehicle. Keep the key out of the reach of children. G WARNING If persons (particularly children) are exposed to heat or cold for a prolonged period, there is a risk of serious or even fatal injuries. Never leave persons (par- ticularly children) unattended in the vehicle. Overview of recommended child restraint systems The smart EQ forfour is equipped with a manual front-passenger front airbag deactivation system. X Before using a rearward-facing child restraint system on the front-passenger seat, dis- able the front-passenger front airbag (Y page 54). i You can obtain further information about the correct child restraint system from a qualified specialist workshop. smart recommends that you use a smart Centre. 46 Travelling safely with children in the vehicle

Safety.

Securing with ISOFIX

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 55 · Applies to: 453

Weight category Size category Type2 Type approval number Order number3 Category 0+: up to 13 kg and up to approximately 15 months Size category E BABY SAFE PLUS E1 04 301 146 B6 6 86 8224 Category I: 9–18 kg Size category B1 DUO PLUS E1 04 301 133 A 000 970 17 02 Securing with the vehicle seat belt Weight category Type2 Type approval number Order number3 Category 0: up to 10 kg and up to approximately 6 months BABY SAFE plus II E1 04 301 146 A 000 970 13 02 Category 0+: up to 13 kg and up to approximately 15 months BABY SAFE plus II E1 04 301 146 A 000 970 13 02 Category I: 9–18 kg and from approx- imately 9 months to 4 years DUO PLUS E1 04 301 133 A 000 970 17 02 Category II/III: 15–36 kg and from approx- imately 4–12 years KIDFIX E1 04 301 198 A 000 970 20 02 Category II/III: 15–36 kg and from approx- imately 4–12 years KIDFIX XP E1 04 301 304 A 000 970 23 02 2 Manufacturer: Britax Römer. 3 With colour code 9H95. Travelling safely with children in the vehicle 47

Safety. Z

Suitable seats in the vehicle for fitting a child restraint system

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 56 · Applies to: 453

Securing systems for child restraint systems Vehicle seat

Left/right rear seat Preferred securing system: ISOFIX child seat secur- ing system (Y page 49) or i‑Size child seat secur- ing system (Y page 51) Also secure Top Tether if available (Y page 53) Alternative securing sys- tem: RVehicle seat belt (Y page 55) Front-passenger seat Securing system: RVehicle seat belt (Y page 55) Be sure to observe: RIf the front-passenger seat is occupied, make sure that the status of the front-passenger front airbag is correct depending on the sit- uation both before and during the journey (Y page 43). Permitted categories for child restraint systems Use only approved child restraint sys- tems Only child restraint systems that meet the following UNECE standards are permitted for use in the vehicle: RUN-R44 RUN-R129 (i‑Size child restraint systems) Identification on the child restraint system Information about the approval category, weight category and approval number, for example, is on the approval label on the child restraint system. Depending on the approval category of the child restraint system, there may be fur- ther information, e.g. the ISOFIX size cate- gory. Approval categories in accordance with UN-R44 Example of an approval label RUniversal: child restraint systems in the "Universal" category are approved for installation in vehicles. They can be used, in accordance with overviews of the suitability of seats for securing child restraint systems, on seats labelled U, UF or IUF. The designation IUF refers to ISOFIX child restraint systems in the "Universal" cat- 48 Travelling safely with children in the vehicle

Safety.

egory. These child restraint systems

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 57 · Applies to: 453

must also be secured using Top Tether or a supporting bracket. RSemi-Universal: child restraint systems in the "semi-universal" category may only be used if the vehicle and the seat are listed in the child restraint system manufacturer's vehicle model list. RVehicle-specific: child restraint systems in the "vehicle-specific" category may only be used if the vehicle and the seat are listed in the child restraint system manufacturer's vehicle model list. Approval categories in accordance with UN-R129 Example of an approval label Ri‑Size: child restraint systems in the "i‑Size" category are approved for instal- lation in vehicles with i‑Size securing rings. They can be used, in accordance with overviews of the suitability of seats for securing child restraint systems, on seats labelled i-U. The designation i-U refers to i-Size child restraint systems in the "Universal" cat- egory. These child restraint systems must also be secured using Top Tether or a supporting bracket. Observe the suitability of vehicle seats Depending on the approval category, there are forward-facing and/or rearward-facing child restraint systems. Usage may be limi- ted for certain vehicle seats. RSuitability of the seats for attaching ISO- FIX child restraint systems (Y page 49) RSuitability of the seats for attaching i‑Size child restraint systems (Y page 51) RSuitability of the seats for attaching belt-secured child restraint systems (Y page 55) Securing the ISOFIX or i-Size child restraint system Suitability of the seats for attaching ISOFIX child restraint systems ISOFIX identification ISOFIX is a standardised securing system for special restraint systems. RThis symbol indicates which seats are suitable for securing an ISOFIX child restraint system in accordance with UN-R44 (Y page 48). ROnly secure child restraint systems approved by UN-R44 in accordance with the following ISOFIX tables. Travelling safely with children in the vehicle 49

Safety. Z

Carry cot

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 58 · Applies to: 453

Size class Equipment Left/right rear seat F ISO/L1 X G ISO/L2 X X Not suitable for an ISOFIX child restraint system in this weight category and/or size category. Weight category 0 (up to 10 kg and up to approximately 6 months) Size class Equipment Left/right rear seat E ISO/R1 IL IL Suitable for ISOFIX child restraint systems in accordance with the table in "Overview of recommended child restraint systems", or if the vehicle and the seat are listed in the child restraint system manufacturer's vehicle model list. Weight category 0+ (up to 13 kg and up to approximately 15 months) Size class Equipment Left/right rear seat E ISO/R1 IL D ISO/R2 IL C ISO/R3 X IL Suitable for ISOFIX child restraint systems in accordance with the table in "Overview of recommended child restraint systems", or if the vehicle and the seat are listed in the child restraint system manufacturer's vehicle model list. X Not suitable for an ISOFIX child restraint system in this weight category and/or size category. Weight category I (9‑18 kg and approximately 9 months to 4 years) Size class Equipment Left/right rear seat D ISO/R2 IL C ISO/R3 X B ISO/F2 IUF B1 ISO/F2X IUF 50 Travelling safely with children in the vehicle

Safety.

Size class

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 59 · Applies to: 453

Equipment Left/right rear seat A ISO/F3 IUF IL Suitable for ISOFIX child restraint systems in accordance with the table in "Overview of recommended child restraint systems", or if the vehicle and the seat are listed in the child restraint system manufacturer's vehicle model list. X Not suitable for an ISOFIX child restraint system in this weight category and/or size category. IUF Suitable for forward-facing ISOFIX child restraint systems in the "Universal" category in this weight category. Suitability of the seats for attaching i‑Size child restraint systems i‑Size identification i‑Size is a standardised securing system for special restraint systems. RThis symbol indicates which seats are suitable for securing an i‑Size child restraint system in accordance with UN-R129 (Y page 48). RChild restraint systems which have been approved in accordance with the following may be secured: - UN-R44 in accordance with the ISOFIX tables (Y page 49) - UN-R129 in accordance with the following i‑Size table Front-passenger seat Left/right rear seat i‑Size child restraint sys- tem X i‑U X Not suitable for an i-Size child restraint system in this weight cate- gory and/or size category. i-U Suitable for forward-facing and rearward-facing i‑Size child restraint systems in the "Universal" category. Installing an ISOFIX or i-Size child restraint system on the rear seat G WARNING For ISOFIX or i‑Size child restraint sys- tems, where the child is secured using the integrated seat belt of the child restraint system, the permissible gross weight of the child and the child restraint system is 33 kg. If the child together with the child restraint system weighs more than 33 kg, ISOFIX or i‑Size child restraint systems with integrated seat belt no longer offer sufficient protection. ISOFIX or i‑Size child seat securing systems may be over- loaded and will not be able to restrain the child, for example, in the event of an accident. This poses an increased risk of injury or even fatal injury. If the child together with the child restraint system weighs more than 33 kg , only use ISOFIX or i-Size child restraint systems with which the child is secured with the vehicle seat belt. Also secure the child restraint system with the Top Tether belt, if available. Travelling safely with children in the vehicle 51

Safety. Z

Always observe the information on the

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 60 · Applies to: 453

weight of the child restraint system:

Rin the installation and operating instruc-

tions provided by the manufacturer for

the child restraint system being used

Ron the label of the child restraint system,

if present

Regularly check that the maximum permis-

sible weight of the child and child restraint

system together is still complied with.

When fitting a child restraint system, be

sure to observe the following:

O be sure to observe the correct use and

the suitability of seats for securing a

child restraint system.

ISOFIX child seat securing system

(Y page 49)

i‑Size child seat securing system

(Y page 51)

O be sure to observe the installation and

operating instructions provided by the

manufacturer for the child restraint

system being used.

O make sure that the child's feet do not

touch the front seat. If necessary, move

the front seat forwards slightly.

When fitting an ISOFIX child

restraint system, also observe the follow-

ing:

O when using a category 0/0+ baby car

seat and a category I, rearward-facing

child restraint system on a rear seat:

adjust the front seat so that the seat

does not touch the child restraint sys-

tem.

O when using a category I, forward-

facing child restraint system: the back-

rest of the child restraint system must,

as far as possible, lie flat against the

backrest of the seat.

O For certain child restraint systems in

weight category II or III, there may be

restrictions on the maximum size set-

ting, e.g. due to possible contact with

the roof.

O The child restraint system must not be

put under strain between the roof and

the seat cushion and/or be fitted facing

the wrong direction.

O The child restraint system must not be

put under strain by the head restraint.

Adjust the head restraints as appropri-

ate.

When fitting an i-Size child

restraint system, also observe the follow-

ing:

O when using a rearward-facing child

restraint system: adjust the front seat

so that it does not touch the child

restraint system.

O when using a forward-facing child

restraint system: the backrest of the

child restraint system must, as far as

possible, lie flat against the backrest of

the seat.

ISOFIX securing rings ; i-Size securing rings Before every trip, make sure that the ISOFIX child restraint system or the i-Size child restraint system is engaged correctly in both ISOFIX or i-Size securing rings. 52 Travelling safely with children in the vehicle

Safety.

X Fit the ISOFIX or i-Size child restraint

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 61 · Applies to: 453

system on both securing rings of the vehicle. Securing Top Tether G WARNING If the rear seat backrests are not locked, they could fold forwards in the event of an accident, heavy braking or sudden changes of direction. As a result, child restraint systems cannot perform their intended protective function. Rear seat backrests that are not locked can also cause additional injuries, e.g. in the event of an accident. This poses an increased risk of injury or even fatal injury. Always lock rear seat backrests after fit- ting a Top Tether belt. Observe the lock verification indicator. Adjust the rear seat backrests so that they are in an upright position. Ensure that the red lock status indicator on the loop at the top of the rear bench seat is no longer visible. If the child restraint system is equipped with a Top Tether belt: Top Tether can reduce the risk of injury. The Top Tether belt provides an additional connection between the child restraint sys- tem secured with ISOFIX or i-Size and the vehicle. Top Tether anchorage : is fitted on the luggage compartment floor behind each rear seat. X Fit the ISOFIX or i-Size child restraint system with Top Tether. Always comply with the child restraint system manufac- turer's installation instructions when doing so. X Move the head restraint upwards. X Route Top Tether belt = under the head restraint between the two head restraint bars. X Guide Top Tether belt = between the seat backrest and the parcel shelf into the luggage compartment. Remove the parcel shelf if necessary (Y page 153). X Hook Top Tether hook ; of Top Tether belt = into Top Tether anchorage :. Lift up the carpet a little if necessary. Ensure that: RTop Tether hook ; is hooked into Top Tether anchorage : as shown. RTop Tether belt = is not twisted. RTop Tether belt = is routed between the seat backrest and the parcel shelf if the parcel shelf is fitted. X Tension Top Tether belt =. Always com- ply with the child restraint system man- ufacturer's installation instructions when doing so. X Move the head restraint back down again slightly if necessary. Make sure that you do not interfere with the correct routing of Top Tether belt =. Travelling safely with children in the vehicle 53

Safety. Z

Disabling or enabling the front

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 62 · Applies to: 453

passenger front airbag G WARNING If the PASSENGER AIRBAG OFF indicator lamp is lit, the front-passenger front air- bag is disabled. It will not be deployed in the event of an accident and cannot per- form its intended protective function. A person in the front-passenger seat could then, for example, come into contact with the vehicle's interior, especially if the person is sitting too close to the dash- board. This poses an increased risk of injury or even fatal injury. In this case the front-passenger seat may not be used. You may only transport a child on the front-passenger seat if they are seated in a suitable rearward or forward-facing child restraint system. Always observe the information about suitable positioning of the child restraint system in this Owner's Manual as well as the child restraint system manufacturer's installation instructions. G WARNING If you secure a child in a rearward-facing child restraint system on the front- passenger seat and the PASSENGER AIR BAG ON indicator lamp is lit, the front- passenger front airbag can deploy in the event of an accident. The child could be struck by the airbag. This poses an increased risk of injury or even fatal injury. Make sure that the front-passenger front airbag has been disabled. The PASSENGER AIR BAG OFF indicator lamp must be lit. NEVER use a rearward-facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it; DEATH or SERIOUS INJURY to the child can occur. If the PASSENGER AIR BAG OFF indicator lamp remains off and/or the PASSENGER AIR BAG ON indicator lamp is lit, do not fit a rearward-facing child restraint system to the front-passenger seat. Further informa- tion can be found under "Problems with the front-passenger front airbag deactivation system" (Y page 194). G WARNING If you secure a child in a forward-facing child restraint system on the front- passenger seat and you position the front-passenger seat too close to the dashboard, in the event of an accident, the child could: Rcome into contact with the vehicle's interior if the PASSENGER AIR BAG OFF indicator lamp is lit, for example Rbe struck by the airbag if the PASSENGER AIR BAG ON is lit up This poses an increased risk of injury or even fatal injury. Move the front-passenger seat as far back as possible. Always make sure that the shoulder belt strap is correctly routed from the vehicle belt outlet to the shoul- der belt guide on the child restraint sys- tem. The shoulder belt strap must be routed forwards and downwards from the vehicle belt outlet. If necessary, adjust the vehicle belt outlet and the front- passenger seat accordingly. Always observe the information in this Owner's Manual on suitable positioning of the child restraint system in addition to the child restraint system manufacturer's installation instructions. Symbol for a rearward-facing child restraint system 54 Travelling safely with children in the vehicle

Safety.

If you use a rearward-facing child restraint

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 63 · Applies to: 453

system on the front-passenger seat, you must disable the front-passenger front air- bag. Airbag-off switch : for enabling and disa- bling the front-passenger front airbag manually is in the dashboard on the front- passenger side. X Push in airbag-off switch : of the front- passenger front airbag beyond the point of resistance. X To disable the front-passenger front air- bag: turn airbag-off switch : anti- clockwise. The PASSENGER AIR BAG OFF 4 indica- tor lamp on the overhead control panel lights up and stays on when the ignition is switched on (Y page 43). X To enable the front-passenger front air- bag: turn airbag-off switch : clockwise. The PASSENGER AIR BAG ON × indica- tor lamp on the overhead control panel lights up and stays on when the ignition is switched on (Y page 43). The front-passenger front airbag is gener- ally enabled when the ignition is switched on, except when the front-passenger front airbag has been disabled manually. When the front-passenger front airbag is disa- bled, the 4 PASSENGER AIR BAG OFF indicator lamp on the overhead control panel (Y page 43) lights up continuously when the ignition is switched on. Attaching a child restraint system with the seat belt Notes on the suitability of the seats for attaching belt-secured child restraint sys- tems Rear seats Weight category Left/right rear seat Category 0: up to 10 kg U, L Category 0+: up to 13 kg U, L Category I: 9 to 18 kg U, L Category II: 15 to 25 kg U, L Travelling safely with children in the vehicle 55

Safety. Z

Weight category

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 64 · Applies to: 453

Left/right rear seat Category III: 22 to 36 kg U, L U Suitable for child restraint systems in the "Universal" category in this weight category. L Suitable for semi-universal child restraint systems in accordance with the table in "Recommended child restraint systems", or if the vehicle and the seat are listed in the child restraint system manufacturer's vehicle model list. Front-passenger seat – notes Notes on child restraint systems on the front-passenger seat RIf circumstances require you to fit a child restraint system to the front-passenger seat, be sure to observe the notes on child restraint systems on the front-passenger seat (Y page 58). Observe the specific notes on rearward-facing and forward-facing child restraint sys- tems. If the front-passenger seat is occupied, make sure that the status of the front- passenger front airbag is correct depending on the situation both before and during the journey (Y page 43). Weight category Front-passenger front air- bag is enabled Front-passenger front air- bag is disabled1 1 The vehicle is equipped with a front- passenger front airbag deactivation system. The PASSENGER AIR BAG OFF indicator lamp must be lit. Category 0: up to 10 kg X U, L Category 0+: up to 13 kg X U, L Category I: 9 to 18 kg UF, L U, L Category II: 15 to 25 kg UF, L U, L Category III: 22 to 36 kg U, L U, L X Not suitable for an ISOFIX child restraint system in this weight cate- gory and/or size category. UF Suitable for forward-facing child restraint systems in the "Universal" category in this weight category. U Suitable for child restraint systems in the "Universal" category in this weight category. L Suitable for semi-universal child restraint systems in accordance with the table in "Recommended child restraint systems", or if the vehicle and the seat are listed in the child restraint system manufacturer's vehicle model list. 56 Travelling safely with children in the vehicle

Safety.

Attaching a child restraint system with

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 65 · Applies to: 453

the seat belt to the rear seat When fitting a belt-secured child restraint system, observe the following: O Be sure to observe the installation and operating instructions provided by the manufacturer for the child restraint system being used. O When using a "Universal" or "Semi- Universal" category child restraint system, ensure that it is approved for the vehicle seat. Observe the notes under "Suitability of seats for attaching belt-secured child restraint systems" (Y page 55). O When using a category 0/0+ baby car seat and a category I rearward-facing child restraint system on a rear seat: adjust the front seat so that the seat does not touch the child restraint sys- tem. O The backrest of a forward-facing child restraint system must, as far as possi- ble, rest flat against the backrest of the rear seat. O For certain child restraint systems in weight categories II or III, the maxi- mum size setting may be restricted, for instance due to possible contact with the roof. O The child restraint system must not be put under strain between the roof and the seat cushion and/or be fitted facing the wrong direction. O The child restraint system must not be put under strain by the head restraint. Adjust the head restraints as appropri- ate. O Make sure that the child's feet do not touch the front seat. If necessary, move the front seat forward slightly. X Fit the child restraint system. The base of the child restraint system must lie fully on the rear seat cushion. X Always make sure that the shoulder belt strap is correctly routed from the vehicle belt outlet to the shoulder belt guide on the child restraint system. The shoulder belt strap must be routed forwards and downwards from the belt outlet. Notes on rearward-facing and forward- facing child restraint systems on the front passenger seat G WARNING If you secure a child in a rearward-facing child restraint system on the front- passenger seat and the PASSENGER AIR BAG OFF indicator lamp is off, the front- passenger front airbag can deploy in the event of an accident. The child could be struck by the airbag. This poses an increased risk of injury or even fatal injury. Make sure that the front-passenger front airbag has been disabled. The PASSENGER AIR BAG OFF indicator lamp must be lit. NEVER use a rearward-facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it; DEATH or SERIOUS INJURY to the child can occur. Observe the specific notes on rearward- facing and forward-facing child restraint systems. Warning notice on the front-passenger sun visor Always pay attention to the status of the front-passenger front airbag with the PASSENGER AIR BAG OFF indicator lamp: RIf circumstances require you to fit a child restraint system to the front-passenger seat, be sure to observe the notes on dis- abling the front-passenger front airbag (Y page 54). RWhen using a rearward-facing child restraint system on the front-passenger seat, the front-passenger front airbag Travelling safely with children in the vehicle 57

Safety. Z

must always be disabled. This is only the

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 66 · Applies to: 453

case if the PASSENGER AIR BAG OFF indi- cator lamp is permanently lit (Y page 43). RIf the PASSENGER AIR BAG OFF indicator lamp goes out, the front-passenger front airbag is enabled. The front-passenger front airbag may deploy during an acci- dent. Attaching a child restraint system with the seat belt to the front passenger seat When fitting a belt-secured child restraint system on the front-passenger seat, always observe the following: O Be sure to observe the installation and operating instructions provided by the manufacturer for the child restraint system being used. O When using a "Universal" or "Semi- Universal" category child restraint system, ensure that it is approved for the vehicle seat. Observe the notes under "Suitability of seats for attaching belt-secured child restraint systems" (Y page 55). O The backrest of a forward-facing child restraint system must, as far as possi- ble, rest flat against the backrest of the front-passenger seat. O For certain child restraint systems in weight categories II or III, the maxi- mum size setting may be restricted, for instance due to possible contact with the roof. O The child restraint system must not be put under strain between the roof and the seat cushion and/or be fitted facing the wrong direction. O The child restraint system must not be put under strain by the head restraint. O Never place objects, such as a cushion, under or behind the child restraint system. X Set the front-passenger seat as far back as possible. X Adjust the seat backrest to an almost vertical position. X Fit the child restraint system. The base of the child restraint system must lie fully against the seat cushion of the front-passenger seat. X Always make sure that the shoulder belt strap is correctly routed from the vehicle belt outlet to the shoulder belt guide on the child restraint system. The shoulder belt strap must be routed forwards and downwards from the belt outlet. X If necessary, adjust the belt outlet and the front-passenger seat as appropriate. Pets in the vehicle G WARNING If you leave animals unsupervised or unsecured in the vehicle, they may press buttons or switches, for instance. In this way, animals may: Ractivate vehicle equipment and become trapped, for example Rswitch systems on or off and thereby endanger other road users Furthermore, unsecured animals may be flung around inside the vehicle in the event of an accident or abrupt steering or braking manoeuvre, and thereby injure vehicle occupants. There is a risk of acci- dent and injury. Never leave animals unattended in the vehicle. Always secure animals properly when driving, for instance with a suitable pet carrier. Driving safely Driving safety system limitations ! Make sure you have suitable tyres, so that assistance systems and driving safety systems can work as effectively as possible. If you fail to adapt your driving style or if you are inattentive, the driving safety sys- tems can neither reduce the risk of accident nor override the laws of physics. Driving safety systems are merely aids designed to assist driving. You are responsible for the 58 Driving safely

Safety.

distance to the vehicle in front, for vehicle

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 67 · Applies to: 453

speed and for braking in good time. Always adapt your driving style to suit the pre- vailing road, weather and traffic conditions and maintain a safe distance from the vehi- cle in front. Drive carefully. For safety reasons, smart recommends that you only use snow chains that have been specially approved for your vehicle by smart. Further information can be obtained at a smart Centre or a qualified specialist workshop. Braking with ABS (Anti-lock Braking System) ABS controls brake pressure in such a way that the wheels do not lock when you brake. This allows you to continue steering the vehicle when braking. When you switch on the ignition, the ! warning lamp in the instrument cluster lights up. It goes out after the engine is started. ABS works from a speed of about 6 km/h, regardless of road surface conditions. ABS intervenes in the case of slippery road sur- faces, even if you only brake gently. X To brake while ABS intervenes: continue to depress the brake pedal with force until the braking situation is over. X To make a full brake application: depress the brake pedal with full force. G WARNING If ABS is faulty, the wheels could lock when braking. The steerability and brak- ing characteristics may be severely impaired. Additionally, further driving safety systems are deactivated. There is an increased danger of skidding and accidents. Drive on carefully. Have ABS checked immediately at a qualified specialist workshop. Using Active Brake Assist Useful information With the help of the radar sensor system, Active Brake Assist can calculate the dis- tance of your vehicle to the vehicle in front. If for several seconds, the distance to the vehicle in front is insufficient for the speed you are driving at, Active Brake Assist alerts the driver visually. If a risk of collision is detected, Active Brake Assist alerts the driver both visually and acoustically. In addition, Active Brake Assist prepares the vehicle for a possible emergency braking manoeuvre. In particularly critical situations Active Brake Assist may brake autonomously. In this case, Active Brake Assist continues to alert the driver both visually and acousti- cally. Please note G WARNING Active Brake Assist cannot always clearly identify objects and complex traffic sit- uations. In these cases, Active Brake Assist may: Rwarn or brake for no reason Rnot issue a warning Rnot brake There is a risk of an accident. Always pay careful attention to the traf- fic situation and do not rely on Active Brake Assist alone. Be prepared to brake or manoeuvre if necessary. G WARNING Active Brake Assist does not react: Rto persons, bicycles, motorcycles or animals Rto approaching vehicles Rto cross traffic Ron bends Driving safely 59

Safety. Z

As a result, Active Brake Assist cannot

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 68 · Applies to: 453

intervene in all critical situations. There is a risk of an accident. Always pay careful attention to the traf- fic situation and be prepared to brake. G WARNING Severe jolting, for example in the case of a collision, may cause the radar sensors to be misaligned. The function of Active Brake Assist is then impaired. There is a risk of an accident. Deactivate Active Brake Assist. Have Active Brake Assist checked at a qualified specialist workshop. The following requirements must also be fulfilled: Rthe selector lever is in position h. Rthe parking brake is released. Rthe driving speed is within the suitable speed range. Detection can be restricted under the fol- lowing conditions: Rthe vehicle is new or service work has been carried out on the system. In this case, observe the information on run- ning-in the vehicle. Rthe radio sensors are dirty or covered (Y page 171). Rin heavy rain or snow. Rthere is interference from other radar sources, e.g. in multi-storey car parks. Rthe vehicle travelling in front is narrow, e.g. a motorcycle. Rthe vehicle travelling in front is travel- ling on a different line. Autonomous braking can be cancelled by briefly depressing the accelerator pedal. If the brake lamps are inoperative, deacti- vate Active Brake Assist. i Observe the notes on "Limitations of the driving safety systems" (Y page 58). Distance warning and forward collision warning with autonomous braking function Method of operation If the distance maintained to the vehicle ahead is insufficient for the speed you are driving at, the · warning lamp lights up. If Active Brake Assist detects a risk of colli- sion while driving, the · warning lamp lights up and a warning tone sounds. If the driver depresses the brake pedal fast, the braking pressure may be increased to a full brake application. The autonomous braking function may intervene if the driver does not react to the forward collision warning. When driving at speeds of more than 30 km/h, the collision warning may issue a warning in the following situations: Situation Speed you are trav- elling Vehicles in front 30 - 140 km/h Vehicles coming to a standstill 30 - 140 km/h Stationary vehicles 30 - 80 km/h Other objects or crossing vehicles No warning possi- ble When driving at speeds of more than 30 km/h, the autonomous braking function may intervene in the following situations: Situation Speed you are trav- elling Vehicles in front 30 - 140 km/h Vehicles coming to a standstill 30 - 140 km/h Stationary vehicles No intervention possible Other objects or crossing vehicles No intervention possible 60 Driving safely

Safety.

Activating/deactivating Active Brake

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 69 · Applies to: 453

Assist Active Brake Assist is automatically activa- ted when you start the engine. Monochrome display: activating/deactivat- ing Active Brake Assist using the on-board computer (Y page 112). Colour display: activating/deactivating Active Brake Assist using the on-board computer (Y page 113). Adaptive brake lamps The adaptive brake lights warn following traffic in an emergency situation: If you brake the vehicle sharply from a speed of more than 50 km/h the brake lamps flash rapidly. If the vehicle is sharply braked to a stand- still at a speed of over 70 km/h, the hazard warning lamps are also switched on auto- matically. The hazard warning lamps switch off automatically if you subse- quently drive faster than 10 km/h. Driving with ESP® G WARNING If ESP® is malfunctioning, ESP® is unable to stabilise the vehicle. In addition, other driving safety systems are switched off. This increases the risk of skidding and an accident. Drive on carefully. Have ESP® checked at a qualified specialist workshop. Within physical limits, ESP® can monitor and improve the driving stability and trac- tion in the following situations: Rwhen pulling away on wet or slippery road surfaces Rwhen braking Rin case of strong crosswinds If the vehicle deviates from the direction desired by the driver, ESP® can stabilise the vehicle by intervening in the following ways: Rbraking one or more wheels accordingly Radjusting the engine output according to the situation ESP® comprises ETS (Electronic Traction System) and Crosswind Assist. ETS brakes the drive wheels individually if they spin. This enables you to pull away or accelerate on slippery surfaces, for example if the road surface is slippery on one side. If the ÷ warning lamp goes out before beginning the journey, ESP® is active. If the ÷ warning lamp flashes in the instrument cluster, ESP® is intervening. If ESP® intervenes, observe the following points: Rpull away carefully: only depress the accelerator pedal as far as necessary Radapt your driving style to the prevailing road and weather conditions If the ÷ ESP® warning lamp lights up continuously, ESP® is not available due to a malfunction. Crosswind Assist is then also no longer active. Observe the additional information on indi- cator and warning lamps and display mes- sages. Crosswind Assist recognises suddenly occurring crosswinds and helps the driver to keep the vehicle in the correct lane. The vehicle is stabilised using a targeted and one-sided application of the brakes. Crosswind Assist is active at vehicle speeds above 70 km/h when driving straight ahead or cornering gently. Information on EBD (Electronic Brake- force Distribution) EBD monitors and controls the brake pres- sure on the rear wheels to improve driving stability while braking. G WARNING If EBD is malfunctioning, the rear wheels can lock, e.g. under full braking. This Driving safely 61

Safety. Z

increases the risk of skidding and an

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 70 · Applies to: 453

accident. You should therefore adapt your driving style to the different handling character- istics. Have the brake system checked at a qualified specialist workshop. 62 Driving safely

Safety.

Understanding functions of the key

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 71 · Applies to: 453

The following keys are available:

Rfolding key

Rreplacement key with fixed bit

% Unlocks the vehicle

; º Opens the tailgate (press and hold)

= & Locks the vehicle

% Unlocks the vehicle ; & Locks the vehicle = é Opens the tailgate (press and hold) X To unlock centrally: press the % but- ton. The turn signals flash once. i After unlocking, open the vehicle within approximately two minutes to prevent it from locking itself and priming the anti- theft alarm system again. X To unlock and open the tailgate: press and hold the º or é button. X To lock centrally: press the & button. The turn signals flash twice. X To activate the double-lock function (for United Kingdom only): press the & button twice. The turn signals flash twice slowly and three times quickly. Opening the door X Press the # button on the key. X Open the door. i After unlocking, open the vehicle within approximately two minutes to prevent it from locking itself and priming the anti- theft alarm system again. Correct driver's seat position G WARNING You could lose control of the vehicle while driving if you: Radjust the driver's seat, steering wheel or mirror Rfasten the seat belt. There is a risk of an accident. Adjust the driver's seat, steering wheel or mirror and fasten the seat belt before starting the engine. Correct driver's seat position 63

Entering and setting up. Z

Observe the following rules on the correct

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 72 · Applies to: 453

driver's seat position: Rthe driver must be as far away from the driver's airbag as possible (Y page 41). Rthe driver must be wearing seat belt = properly. Rthe driver must be able to depress the pedals properly. Rthe driver must be able to move their legs freely. Rthe driver must be able to reach steering wheel : with their arms slightly bent. Rthe driver must be able to see all the dis- plays in the instrument cluster clearly. Rmove seat backrest ; to an almost verti- cal position. Rsit in a normal upright position. Rthe seat belt must fit snugly across your body. Rthe seat belt must be routed across the middle of your shoulder. Rthe seat belt must be routed in your pel- vic area across the hip joints. Radjust the rear-view and exterior mirrors so that the driver has a good view of the road and traffic. Adjusting the seats Please note G WARNING If children adjust the seats, they could become trapped, especially if they are unattended. There is a risk of injury. When leaving the vehicle, always take the key with you and lock the vehicle. Never leave children unattended in the vehicle. G WARNING If the driver's seat is not correctly engaged, it could unexpectedly move while driving. This could cause you to lose control of the vehicle. There is a risk of an accident. Always ensure that the driver's seat is engaged before starting the vehicle. G WARNING When adjusting a seat, you or another vehicle occupant could become trapped by the guide rail of the seat, for instance. There is a risk of injury. Make sure that no one has any part of their body within the area of movement of the seat when adjusting it. G WARNING The seat belt does not offer the intended level of protection if you have not moved the backrest to an almost vertical posi- tion. When braking or in the event of an accident, you could slide underneath the seat belt and sustain abdomen or neck injuries, for example. This poses an increased risk of injury or even fatal injury. Adjust the seat properly before beginning your journey. Always ensure that the backrest is in an almost vertical position and that the shoulder section of your seatbelt is routed across the centre of your shoulder. G WARNING The steering wheel may move unexpect- edly if you adjust it while driving. This could cause you to lose control of the vehicle. There is a risk of an accident. Make sure that the steering wheel is locked before driving off. Never unlock the steering wheel when the vehicle is in motion. G WARNING You could lose control of the vehicle while driving if you: Radjust the driver's seat, steering wheel or mirror Rfasten the seat belt. There is a risk of an accident. 64 Adjusting the seats

Entering and setting up.

Adjust the driver's seat, steering wheel or

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 73 · Applies to: 453

mirror and fasten the seat belt before starting the engine. ! Make sure that there are no objects in the footwell under or behind the seats when moving the seats back. There is a risk that the seats and/or the objects could be damaged. Observe the safety notes on "Airbags" (Y page 41) and "Children in the vehicle" (Y page 44). Adjusting the seat fore-and-aft posi- tion Seat with a lever Seat with a handwheel To adjust the seat fore-and-aft position, the seat belt must not be fastened. X Lift lever =. X Slide the seat forwards or backwards. The seat engages audibly. Adjusting the seat height (seat with a lever only) X Pull handle ; up or push it down several times. Adjusting the seat backrest (seat with a lever) X Pull lever : upwards. X At the same time, move the backrest for- wards or backwards. Adjusting the seat backrest (seat with a handwheel) X Turn handwheel ? forwards or back- wards. Adjusting the steering wheel G WARNING The steering wheel may move unexpect- edly if you adjust it while driving. This could cause you to lose control of the vehicle. There is a risk of an accident. Make sure that the steering wheel is locked before driving off. Never unlock the steering wheel when the vehicle is in motion. G WARNING You could lose control of the vehicle while driving if you: Radjust the driver's seat, steering wheel or mirror Rfasten the seat belt. There is a risk of an accident. Adjust the driver's seat, steering wheel or mirror and fasten the seat belt before starting the engine. Adjusting the steering wheel 65

Entering and setting up. Z

G WARNING

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 74 · Applies to: 453

Children could become trapped by the steering wheel if they adjust it. There is a risk of injury. When leaving the vehicle, always take the key with you and lock the vehicle. Never leave children unattended in the vehicle. X Fold down lever :. X Set desired steering wheel height 2. X Fold up lever :. X Check that the steering column is locked. Adjusting the mirrors Adjusting the rear-view mirror X Move the rear-view mirror up, down, left or right. Manually setting the rear-view mirror to anti-dazzle mode X Fold lever : forwards. Understanding automatic anti-dazzle mode of rear-view mirror Please note G WARNING Electrolyte may escape if the glass in an automatic anti-dazzle mirror breaks. The electrolyte is harmful and causes irrita- tion. It must not come into contact with your skin, eyes, respiratory organs or clothing or be swallowed. There is a risk of injury. If you come into contact with the electro- lyte, observe the following: RRinse off the electrolyte from your skin immediately with water. RImmediately rinse the electrolyte out of your eyes thoroughly with clean water. RIf the electrolyte is swallowed, immedi- ately rinse your mouth out thoroughly. Do not induce vomiting. RIf electrolyte comes into contact with your skin or hair or is swallowed, seek medical attention immediately. RImmediately change out of clothing which has come into contact with elec- trolyte. RIf an allergic reaction occurs, seek medical attention immediately. Useful information The rear-view mirror automatically goes into anti-dazzle mode if simultaneously: Rthe ignition is switched on Rincident light from headlamps hits the sensor in the rear-view mirror The rear-view mirror does not go into anti- dazzle mode if reverse gear is engaged or if the interior lighting is switched on. 66 Adjusting the mirrors

Entering and setting up.

Adjusting the exterior mirrors man-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 75 · Applies to: 453

ually G WARNING You could lose control of the vehicle while driving if you: Radjust the driver's seat, steering wheel or mirror Rfasten the seat belt. There is a risk of an accident. Adjust the driver's seat, steering wheel or mirror and fasten the seat belt before starting the engine. G WARNING The exterior mirrors reduce the size of the image. Objects visible in the mirrors are closer than they appear. You could mis- judge the distance from road users driv- ing behind you when changing lanes, for instance. There is a risk of an accident. You should therefore always look over your shoulder to determine the actual distance from road users driving behind you. X Move lever : up, down, left or right. Adjusting the exterior mirrors electri- cally In order to adjust the exterior mirrors elec- trically, the ignition must be switched on. X To select the left or right exterior mirror: turn control = left 1 or right 2. X To adjust the exterior mirrors: move con- trol = up, down, left or right. Adjusting head restraints in the rear compartment Please note G WARNING The head restraints cannot provide the intended protection unless they are fitted and adjusted correctly. There is an increased risk of injury to the head and neck in the event of an accident or sud- den braking, for example. Always drive with the head restraints fit- ted. Ensure that the centre of the head restraints support the back of each vehi- cle occupant's head at eye level before driving off. Adjust the head restraints in the rear so that the head restraint is as close as possi- ble to the back of your head. Raising the head restraints in the rear X Pull the head restraint up until it engages. Adjusting head restraints in the rear compartment 67

Entering and setting up. Z

Lowering the head restraints in the

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 76 · Applies to: 453

rear X Press release button :. X Push the head restraint down. Using the armrest Please note ! Do not lean on the armrest with full force or it could become damaged. 68 Using the armrest

Entering and setting up.

Starting the engine

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 77 · Applies to: 453

Please note G WARNING If children are left unsupervised in the vehicle, they can: Ropen doors and endanger other persons or road users Rclimb out and be injured by the traffic Roperate vehicle equipment and, for example, trap themselves. Children could also set the vehicle in motion, for example by: Rreleasing the parking brake Rshifting the automatic transmission out of park position P Rstarting the engine. There is a risk of an accident and injury. When leaving the vehicle, always take the key with you and lock the vehicle. Never leave children unattended in the vehicle. Always keep the key out of reach of children. G WARNING If you attach heavy or large objects to the key, the key could be unintentionally turned in the ignition lock. This could cause the engine to be switched off. There is a risk of an accident. Do not attach any heavy or large objects to the key. Remove any bulky keyrings before inserting the key into the ignition lock. u To insert the key into the ignition lock 1 To switch on the power supply 2 To switch on the ignition 3 To start the engine Automatic transmission X Turn the key to position 3 until the READY indicator appears in the instru- ment cluster and a warning tone sounds. X Shift out of transmission position j or i. i Hold the key in position 3 until the engine starts. Pulling away Please note G WARNING Objects in the driver's footwell can impede pedal travel or block a pedal which is depressed. This jeopardises safe operation of the vehicle. There is a risk of an accident. Stow all objects in the vehicle safely, so that they cannot reach the driver's foot- well. Make sure the floormats and carpets are properly secured so that they cannot slip and obstruct the pedals. Do not lay several floormats or carpets on top of one another. Pulling away 69

Driving. Z

G WARNING

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 78 · Applies to: 453

Unsuitable footwear can hinder correct usage of the pedals, e.g.: Rshoes with thick soles Rshoes with high heels Rslippers There is a risk of an accident. Wear suitable footwear to ensure correct usage of the pedals. G WARNING If you switch off the ignition while driv- ing, safety-relevant functions are only available with limitations, or not at all. This could affect, for example, the power steering and the brake boosting effect. You will require considerably more effort to steer and brake. There is a risk of an accident. Do not switch off the ignition while driv- ing. Note the following when pulling away: RDo not drive with the parking brake applied. RUse caution when pulling away on slip- pery surfaces. RDo not allow tyres to spin. RDepress the brake pedal and keep it depressed. RPress the release button on the selector lever. RShift the gear selector lever to position h or k. Using the parking brake Please note G WARNING If the parking brake has not been fully released when driving, the parking brake can: Roverheat and cause a fire Rlose its hold function. There is a risk of fire and an accident. Release the parking brake fully before driving off. G WARNING If you must brake the vehicle with the parking brake, the braking distance is considerably longer and the wheels could lock. This increases the risk of skidding and an accident. Only use the parking brake to brake the vehicle when the service brake is faulty. Do not apply the parking brake too firmly. If the wheels lock, release the parking brake until the wheels begin turning again. G WARNING If you leave children unattended in the vehicle, they may be able to set the vehi- cle in motion if, for example, they: Rrelease the parking brake Rshift the automatic transmission out of park position P Rstart the engine In addition, they may operate vehicle equipment and become trapped. There is a risk of an accident and injury. When leaving the vehicle, always take the key with you and lock the vehicle. Never leave children unattended in the vehicle. Applying the parking brake 70 Pulling away

Driving.

X Pull parking brake ; upwards.

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 79 · Applies to: 453

The brake lights do not light up when you brake the vehicle with the parking brake. Releasing the parking brake X Depress the brake pedal and keep it depressed. X Press release button : on parking brake ; and move the parking brake down to the stop. Hill start assist G WARNING After a while, hill start assist no longer holds the vehicle and it may roll away. There is a risk of an accident and injury. Therefore, quickly move your foot from the brake pedal to the accelerator pedal. Never leave the vehicle when it is held by hill start assist. Hill start assist keeps the vehicle in place when driving uphill as soon as the brake pedal is released. Hill start assist is only active in the follow- ing situations: Rwhen pulling away on an uphill slope Rwhen the parking brake is released Rthe transmission is not in position i RESP® is functioning correctly. X Release the brake pedal. The vehicle is then held for about one second. X Pull away. Automatic transmission Please note G WARNING When the engine is switched off, the automatic transmission shifts into neu- tral position N. The vehicle may roll away. There is a risk of an accident. Always shift to parking position P before switching off the engine. Secure the parked vehicle against rolling away by applying the parking brake. Transmission position display ! Only shift into transmission positions B, C or A when the vehicle is stationary. Otherwise, you may damage the transmission. The following transmission positions are available: Rj Park position Position j should not be used to brake the vehicle when parking. To secure the vehicle, apply the parking brake in addi- tion to shifting to transmission position j. Rk Reverse gear Ri Neutral No power is transmitted from the engine to the drive wheels. Rh Drive Changing the transmission position j Park position with parking lock k Reverse gear i Neutral h Drive The ignition must be switched on in order to shift the transmission to positions j, i or k. To shift the transmission from position j, you must also depress the brake pedal. Automatic transmission 71

Driving. Z

X Press release knob :.

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 80 · Applies to: 453

X Shift the selector lever to the desired transmission position. Maximum acceleration (kickdown) To reach maximum acceleration, use kick- down: X Depress the accelerator pedal beyond the pressure point. X Ease off the accelerator pedal once the desired speed is reached. Using the turn signals The ignition must be switched on in order to use the turn signals. X To indicate: press the combination switch in the direction of arrow 1 (right) or 2 (left) past the point of resistance. X To indicate briefly: press the combina- tion switch briefly to the point of resist- ance. The turn signal flashes three times. Acoustic presence indicator Useful information Vehicles with an electric motor generate much less driving noise than vehicles with internal combustion engines. As a result, the vehicle may not be heard by other road users in certain situations. In order to allow your vehicle to be heard when it is moving at slow speeds, a sound generator installed in the vehicle produces a specific noise at speeds between 0 and 30 km/h. This function is called the acoustic presence indicator. This helps other road users, particularly pedestrians and cyclists, to hear your vehicle better. The acoustic presence indicator can also be heard in the vehicle interior. The volume of the acoustic presence indi- cator depends on the engine speed. The faster you accelerate, the louder the sound is. At speeds of over 30 km/h, the sound is switched off. Above this speed, the driving noise naturally created by the vehicle is typically sufficient for the vehicle to be heard in good time by other road users. Deactivating/activating the acoustic presence indicator The acoustic presence indicator is automat- ically activated each time the ignition is started. X Press the switch. If the acoustic presence indicator is deactivated, the LED on the switch lights up. Radar-based recuperation Only for instrument cluster with colour dis- play: The "Radar-based recuperation" function adapts the vehicle's rate of recuperation to current traffic conditions. It activates itself automatically as soon as the accelerator pedal is released. There are five levels up to the maximum value for optimum recupera- tion and distance to the vehicle ahead. The 72 Radar-based recuperation

Driving.

maximum value can vary depending on the

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 81 · Applies to: 453

charge status of the battery and the battery temperature. Radar sensors measure the distance to and the speed of a vehicle ahead. The shorter the distance to the vehicle ahead, the greater the recuperation. When recupera- tion is high, the brake lamps also light up. The current level of recuperation is not shown in the power display (Y page 74). Radar-based recuperation is not active in the following cases: Rthe radar sensor system is malfunction- ing Rthe connection to the radar is interrupted RActive Brake Assist is deactivated RECO mode is activated. Rthe vehicle speed is too low Rthe transmission is in position k or i Radar-based recuperation is deactivated when ECO mode is activated. On-board computer with colour display: the symbol in the display indicates the status of radar-based recuperation: R lights up white: switched on, not active R lights up green: switched on, active R is not displayed: Active Brake Assist is deactivated or the radar sensor is mal- functioning On-board computer with colour display: radar-based recuperation is switched on and off in the on-board computer (Y page 113). Observe the notes on safe driving (Y page 58). Driving economically Notes on economical driving In order to save energy, a part of the kinetic energy is recuperated and stored in the high-voltage battery. When the driver releases the accelerator pedal, the vehicle decelerates. In the following cases, the vehicle does not decelerate, or only decelerates to a limited extent, when the accelerator pedal is released: Rthe gear lever is in position h and the vehicle is rolling backwards Rthe gear lever is in position k and the vehicle is rolling forwards On steep slopes, the vehicle may not be held at all or only be held to a limited degree. In the following cases recuperation is restricted: Rthe high-voltage battery is full or too cold Rthe power electronics or engine has over- heated Recommendations for driving economically: Raccelerate moderately Robserve the power availability dis- play(Y page 74) Rdrive with care Ruse the air conditioning and the electri- cal consumers sparingly Rhave maintenance work carried out at the specified service intervals You can use ECO mode in order to save more energy. ECO mode has the following characteristics: Rreduced torque and significantly reduced power. This supports a particularly effi- cient, steady driving style. The speed is reduced to approx. 110 km/h. Rthe performance of the air-conditioning and heating systems is reduced. Rthe maximum available recuperation is activated. Rthe vehicle accelerates more slowly. Rthe "radar-based recuperation" function is switched off. To increase acceleration when in ECO mode, depress the accelerator pedal beyond the pressure point. Driving economically 73

Driving. Z

Switching ECO mode on/off

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 82 · Applies to: 453

X Press button :.

If the energy-saving function is activa-

ted, the ECO display is shown in the on-

board computer.

The energy-saving function is switched

off when the ignition is restarted.

Power and charge level display

Useful information

Power display ; Charge level display Power display : and charge level dis- play ; can be adjusted to the left or right. The charge level display lights up when the vehicle is unlocked. Power display ! Do not hang any objects on the power display. This could cause the dashboard clock to be torn out of its anchorage point and be severely damaged. Power display : contains two areas: RArea to the right of 0 The current power that the high-voltage battery provides is shown here. 100% cor- responds to the peak performance of the high-voltage battery. RArea to the left of 0 The vehicle's level of recuperation in overrun mode and when braking is shown here. The LED ring in power display : shows the power output available. If the needle for power display : is in the "OFF" position, the vehicle is not ready to drive because: Rthe ignition is switched off Rthe gear lever has not been moved to position i or j to start the drive sys- tem Rthe charging cable is still connected to the vehicle socket Rthere is insufficient power available from the high-voltage battery Rthere is a malfunction in the vehicle's high-voltage electrical system If the drive system has been started, the needle of power display : is in position "0". The READY indicator appears in the instrument cluster. A tone sounds. The vehicle is ready for driving. Charge level display ! Do not hang any objects on the charge level gauge. This could cause the charge level gauge to be torn out of its anchorage point and be damaged. Charge level display ; displays the charge status of the high-voltage battery as a per- centage. The high-voltage battery has reached the reserve level in the following cases: Rthe Battery Reserve Level message appears in the display Rcharge level display ; is in the red area i Charge the high-voltage battery when the charge falls below 20%. 74 Driving economically

Driving.

Understanding the eco score display

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 83 · Applies to: 453

in the on-board computer Useful information The eco score display provides information on how to drive economically. A higher percentage indicates a more eco- nomical driving style. The percentage of the eco score display only appears after covering a short dis- tance. If the ignition remains switched off for longer than four hours, the eco score display will be reset. Monochrome display The percentage of the eco score display increases when you: Raccelerate with moderation Ravoid unnecessary acceleration and deceleration Colour display The percentage in the eco score display is calculated using the following categories: RSpeed: the value increases when driving at low speeds. RAnticipation: the value increases when unnecessary acceleration and decelera- tion is avoided. Using the eco score display in the smart Media-System Calling up the eco score menu X Select Vehicle > eco score. Evaluating the current trip X Select Current trip. Evaluation information and values are calculated. The following rating information and values appear: RBar graphs for accelerate, anticipa‐ tory and shift RBar graphs for Speed and Anticipation RDistance covered RTotal eco score as a percentage Saving the current trip X Select Current trip > Save. X Select the category under which you want to save the trip. The values for the current trip will be added to the category selected and the current trip will be reset. In the instru- ment cluster, the trip computer values will be returned to "From reset". The values for the current trip will be added to the category selected and the current trip will be reset. In the instru- ment cluster, the values for the "From start" trip computer and eco score dis- play will be reset. Driving economically 75

Driving. Z

Comparing the current trip with the

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 84 · Applies to: 453

saved trips from a category

Last trip saved in this category ; Average value for the category = Best trip in the category X Select Current trip > W > Compare. X Select a category. A comparison of the values for the cur- rent trip with the values of the selected category appears. X Select comparison value :, ; or =. The current trip is compared to the respective comparison value from the category. Resetting the current trip data X Select Current trip > Reset. X Select Yes. In the instrument cluster, the trip com- puter values will be returned to "From reset". In the instrument cluster, the values for the "From start" trip computer and eco score display will be reset. Activating/deactivating eco score after a trip X To activate: select Current trip > W > Show eco score after trip. X To deactivate: select Current trip > W > Hide eco score after trip. Displaying eco score for saved trips in a category X Select Vehicle > eco score > My prefer‐ red trips. X Select a category. eco score displays the comparison values. eco score contains the following compari- son values for each category: RSummary RLast value RAverage value RBest value For the category Last trip saved you can choose from various types of evalua- tions. Types of evaluations: RSummary RDetailed report Renaming an eco score category At least one trip must be stored in the respective category. X Select Vehicle > eco score > My prefer‐ red trips > W > Rename this cate‐ gory. Resetting the eco score of a category At least one trip must be stored in the respective category. X Select Vehicle > eco score > My prefer‐ red trips > W > Reset this cate‐ gory. Braking correctly Please note G WARNING The braking system can overheat if you leave your foot on the brake pedal while driving. This increases the braking dis- tance and could even cause the braking system to fail. There is a risk of an acci- dent. 76 Braking correctly

Driving.

Never use the brake pedal as a footrest.

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 85 · Applies to: 453

Do not simultaneously depress both the brake pedal and the accelerator pedal while driving. The vehicle decelerates as soon as you release the accelerator pedal. This aids recuperation as the motor is used as a gen- erator and charges the high-voltage bat- tery. Braking on steep downhill gradients Observe the following rules when driving on downhill gradients: Rdo not move the selector lever to position i Rif recuperation is restricted, also brake at intervals Braking on wet road surfaces There may be a delayed brake response when driving on wet roads, after driving through a car wash or after driving through deep water. X Maintain a greater distance to the vehicle in front. X Brake more firmly. Braking on salt-treated roads When driving on salt-treated roads, a layer of salt may form on the brake discs and pads. This increases the vehicle's braking distance. X In order to prevent any salt build-up, apply the brakes occasionally while pay- ing attention to the traffic conditions. X Brake carefully at the end of the journey and when starting the next journey. X Maintain a greater distance to the vehicle in front. Driving on wet roads Aquaplaning Depending on driving style and tyre tread depths, aquaplaning can occur on the road. Adapt your driving style as follows: X Reduce the speed. X Brake carefully. X Avoid sudden steering movements. X Avoid tyre ruts. Fording ! Bear in mind that vehicles travelling in front or in the opposite direction create waves. This may cause the maximum per- missible water depth to be exceeded. These notes must be observed under all circumstances. You could otherwise dam- age the engine, the electronics or the transmission. Observe the following when driving through standing water: X Do not drive through water that is higher than the lower edge of the vehicle body. X Drive at walking pace. Winter driving X Before the start of winter, have the vehi- cle checked at a qualified specialist workshop. X Use winter tyres and, if applicable, snow chains. X Drive carefully and avoid sudden accel- eration, turning and braking on slippery road surfaces. X Do not use cruise control. X If the vehicle skids, take corrective steer- ing actions to counteract the movement. X If the vehicle skids, shift the transmis- sion to position i. X Do not use the outside temperature dis- play as a way to determine if conditions are icy. X Observe the road surface. Winter driving 77

Driving. Z

Lane Keeping Assist

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 86 · Applies to: 453

Please note G WARNING Lane Keeping Assist cannot always clearly detect lane markings. In such cases, Lane Keeping Assist can: Rissue an unnecessary warning Rnot issue a warning There is a risk of an accident. Always pay particular attention to the traffic situation and keep within the lane, especially if Lane Keeping Assist alerts you. G WARNING The Lane Keeping Assist warning does not return the vehicle to the original lane. There is a risk of an accident. Always steer, apply the brakes or accel- erate the vehicle yourself, especially if Lane Keeping Assist alerts you. Lane Keeping Assist issues an acoustic and visual warning when a vehicle uninten- tionally leaves the lane. Lane Keeping Assist uses a camera which is located on the windscreen behind the rear- view mirror. Lane Keeping Assist does not keep your vehicle in its lane. The driver is responsible for driving the vehicle in a safe manner and staying within the lane. Lane Keeping Assist could be impaired or fail to respond under the following condi- tions: Rpoor visibility Rstrong glaring light Rdirty windscreen in the camera area Runclear or broken lane markings Rvery narrow and winding roads Rhighly variable shade conditions on the road When the turn signal is set, warnings are suppressed for a certain period of time. No warning is given in the following situa- tions: Rwhen crossing a lane marking quickly Rat speeds below 70 km/h On-board computer with monochrome dis- play: the ¸ and ¤ symbols in the dis- play indicate the status of Lane Keeping Assist: R¸: speed is below 70 km/h or lanes are not detected due to external causes. No warning is given when the vehicle leaves the lane. R¤: speed is above 70 km/h and the system is able to detect lane markings. A warning is given if the vehicle uninten- tionally leaves the detected lane. On-board computer with colour display: The ¸ symbol in the display indicates the status of Lane Keeping Assist: R¸ lights up white: speed is below 70 km/h or lanes are not detected due to external causes. No warning is given when the vehicle leaves the lane. R¸ lights up green: speed is above 70 km/h and the system is able to detect lane markings. A warning is given if the vehicle unintentionally leaves the detec- ted lane. Activating and deactivating Lane Keeping Assist X Press the switch. When Lane Keeping Assist is deactivated, the LED on the switch lights up. On-board computer with colour display: the display also shows a message. 78 Lane Keeping Assist

Driving.

When the ignition is restarted, the last set-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 87 · Applies to: 453

ting of Lane Keeping Assist is retained. Cruise control and limiter Please note G WARNING If you call up the stored speed and this differs from your current speed, the vehi- cle will accelerate. If you do not know the stored speed, the vehicle can accelerate unexpectedly. There is a risk of an acci- dent. Before you call up the stored speed, pay attention to traffic conditions. If you do not know the stored speed, store the desired speed again. Cruise control is used in order to drive at a constant speed for a prolonged period. The limiter helps to avoid exceeding a stored speed. The driver is responsible for driving the vehicle in a safe manner, controlling the vehicle speed and braking in good time. If there is a change of drivers, inform the new driver of the speed stored. The two driver assist systems require the following: Rfavourable weather and good visibility Rgood road and traffic conditions The cruise control and limiter systems do not brake automatically. Rreduce the vehicle speed by applying the brakes Speed regulation is cancelled when the fol- lowing occur: Rbraking (including the parking brake) RESP® intervention On downhill gradients or when accelerating briefly, cruise control may interrupt speed regulation. Afterwards, the set speed is applied again. On downhill slopes, the limiter can exceed the set speed. In this case, the stored speed flashes in the display and a warning tone sounds. Cruise control is ready for use at speeds above 30 km/h. With the limiter, speeds of 30 km/h and over can be set as the maxi- mum speed. Cruise control and limiter cannot be activa- ted at the same time. Activating cruise control or the lim- iter X Press top (cruise control) or bottom (lim- iter) of button :. The ¯ (cruise control) or È (lim- iter) button appears in the instrument cluster display. Storing the current speed X Press the ® button ;. Limiter: the stored speed appears next to the È symbol in the instrument clus- ter display. Cruise control: the stored speed appears next to the ¯ symbol in the instru- ment cluster display. Adjusting the stored speed X Press the ® button ; or the g button until the desired speed is reached. Interrupting cruise control and the limiter X Press the ± button ?. The stored speed can be accessed again later. Cruise control and limiter 79

Driving. Z

The stored speed is deleted when the

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 88 · Applies to: 453

engine is switched off. Calling up the stored speed X Press the ° button =. X Cruise control: release the accelerator pedal. Deactivating cruise control or the limiter X Press button : to the OFF centre posi- tion. The ¯ or È symbol in the instru- ment cluster display goes out. The stored speed is deleted. The stored speed is deleted when the engine is switched off. Charging the high-voltage battery Please note G DANGER The vehicle's high-voltage electrical sys- tem is under high voltage. If you modify components in the vehicle's high-voltage electrical system or touch damaged com- ponents, you may suffer an electric shock. The components in the vehicle's high-voltage electrical system may be damaged in an accident, although the damage is not visible. There is a risk of fatal injury. Never carry out modifications to the high-voltage electrical system. Never touch damaged components of the high-voltage electrical system. Do not touch high-voltage components after an accident. Have the vehicle transported away after an accident. Have the high-voltage electrical system checked at a qualified specialist work- shop. G WARNING In the event of a vehicle fire, the internal pressure of the high-voltage battery could exceed a critical value. In this case, flammable gas escapes through a vent valve in the vehicle's underbody. The gas could ignite. There is a risk of injury. In cases of unusual smells developing, smoke or burn marks, stop the charging process immediately. Leave the danger area immediately. Secure the danger area at a suitable dis- tance. Contact a qualified specialist workshop. G WARNING If the housing of the high-voltage bat- tery has been damaged, electrolyte and gases may leak out. These are poisonous and caustic. There is a risk of injury. Avoid contact with the skin, eyes or clothing. Immediately rinse electrolyte splashes off with water and seek medical attention straight away. G DANGER The vehicle's high-voltage electrical sys- tem is under high voltage. If you carry out work on high-voltage components, you may suffer an electric shock. There is a risk of fatal injury. To avoid such risks, observe the follow- ing: Rdo not tamper with high-voltage com- ponents or the orange cables of the vehicle's high-voltage electrical sys- tem Rnever touch the high-voltage compo- nents or the orange cables of the high- voltage electrical system in a vehicle which has been involved in an accident Rnever touch any damaged components or the damaged orange cables of the vehicle's high-voltage electrical sys- tem 80 Charging the high-voltage battery

Driving.

Rdo not remove the covers of the high-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 89 · Applies to: 453

voltage electrical system components that are marked with a yellow warning sticker Rdo not insert any objects which con- duct electricity into the charging cable connector or the charging cable socket G DANGER The vehicle's high-voltage electrical sys- tem is under high voltage. If the charging process is not performed properly, it could cause a fire or an electric shock. There is a risk of fatal injury. Do not perform the charging process in the following situations: Rat temperatures of over 50 † and below -40 † Rin storms Rif the charging cable is damaged, rus- ted or corroded Rif there is moisture on the charging cable connector or charging cable socket, or your hands are wet Rwhen cleaning the vehicle To avoid hazardous situations, always han- dle the charging cable correctly before and after using it: Rbefore using the charging cable for the first time, remove the adhesive tape which holds the cable together Runwind the charging cable fully before every charging process Rthere must be no foreign objects in the charging cable connector or on the charging cable socket Rkeep the charging cable out of the reach of children and animals. Always store the charging cable in a safe place, e.g. in the charging cable bag The high-voltage battery must not be charged with a damaged charging cable. Therefore, always make sure that: Ryou do not damage the charging cable, e.g. by driving over it, pulling too hard or as a result of heavy impacts Rthe charging cable is not twisted, as oth- erwise the charging cable may overheat and the cable covering may be damaged Rthe charging cable is not placed in water, fluids or snow The charging cable must always be used in the correct manner. In order to ensure the charging cable is handled correctly, observe the following: Rdo not make any changes or modifica- tions to the charging cable Ronly use the charging cable to charge the high-voltage battery Rdo not pull out the charging cable con- nector or the charging cable socket dur- ing the charging process For safety reasons, only use the charging cable which is supplied with the vehicle or has been approved by smart for this vehi- cle. Useful information Method of operation The vehicle is equipped with a high-volt- age battery for driving. The high-voltage battery stores the energy needed to operate the electric motor and releases it again. The electric motor uses energy stored in the high-voltage battery for pulling away and accelerating. In overrun mode, kinetic energy is conver- ted into electrical energy by recuperation and stored in the high-voltage battery. In addition to recuperation, the high-volt- age battery can be charged as follows: Rwith the suitable charging cable at a mains socket while the vehicle is station- ary Rwith the suitable charging cable at a wallbox while the vehicle is stationary Rwith the suitable charging cable at a charging station while the vehicle is sta- tionary Charging the high-voltage battery 81

Driving. Z

: Charging cable for charging at a charg-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 90 · Applies to: 453

ing station or wallbox ; Charging cable for charging at a mains socket Charging cables may differ from the ver- sions shown depending on the country. The different versions of charging cables are distinguished by their charging cable connectors. The charging cable which is charged at a mains socket also has controls. The options listed for charging a high-volt- age battery are not available in all coun- tries. The high-voltage battery can be charged at a charging station or wallbox in a nominal voltage range from 100 V to 400 V. Vehicles with 22 kW on-board charger: the high-voltage battery can be charged in a nominal voltage range from 220 V to 400 V. i If possible, only charge the high-volt- age battery when the charge is below 80%. Charge the high-voltage battery at the latest when the charge falls below 20%. Discharged high-voltage battery The high-voltage electrical system switches off if the high-voltage battery is completely discharged. This protects the high-voltage battery from exhaustive dis- charge. i Switching the ignition on and then off can reactivate the high-voltage electrical system temporarily. The vehicle can then be parked safely. Do not leave the vehicle with a discharged or almost fully discharged high-voltage battery for longer than 14 days. You can check the charge status in the charge level display (Y page 74). Extreme outside temperatures The efficiency of the high-voltage battery is temperature-dependent and is signifi- cantly reduced at low or high temperatures. In addition, the electrolytes used may freeze at very low temperatures. The LED ring in the power output display shows the power output available (Y page 74). Energy consumption and range The available energy in the high-voltage battery is basically reduced by the follow- ing factors: Rlow outside temperatures Roperating the air-conditioning system or heating Ruse of electrical consumers Leaving the vehicle parked for an extended period at low outdoor temperatures without charging it can lead to the following: Rhigh-voltage battery output is signifi- cantly reduced Rcharge times can be longer Rrange can be significantly reduced In extreme cases, it may not be possible to start the vehicle as a result. You should therefore always ensure that the high-volt- age battery is fully charged or that the charging cable is connected when parking the vehicle for an extended period of time at low outside temperatures. As the high-voltage battery ages, the capa- city of the high-voltage battery will dimin- ish over the battery's lifetime. This means that the maximum range and the maximum acceleration are reduced. 82 Charging the high-voltage battery

Driving.

Battery care

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 91 · Applies to: 453

Observe the following notes on battery care: Ravoid storing or transporting the vehicle in high temperatures over a long period (e.g. container transport). Rconnect the vehicle to a power supply when parking it for an extended period of time. Rtemperatures below Ò25 † for more than seven days can cause irreversible dam- age to the vehicle due to frost damage. Terms of use Observe the information on exceptions and limitations in the warranty documentation and in the Service Booklet. Voltage surge protector ! Overvoltage in the mains supply can damage the vehicle. The vehicle is there- fore equipped with a device which pro- tects it from overvoltage in the mains supply. This device may be triggered during severe thunderstorms, for exam- ple, and may lead to the building's circuit breaker being tripped and an interrup- tion in the power supply. These functions protect the vehicle. After the building's circuit breaker is switched on again, the charging process resumes automatically. Following an interruption in the power supply without the building's circuit breaker being tripped, it may take up to ten minutes for charging to resume auto- matically. After the device has triggered, switch the building's fuse unit on again. Otherwise, the charging process will not resume. Heat generated by the charging cable and charging cable connector Charging cables and charging cable con- nectors may heat up during the charging process at a power socket. In the following cases, the degree of heat- ing is within the permissible limits: Rthe mains supply and charging cable infrastructure are intact Rthe instructions for handling the charg- ing cable and control panel of the charg- ing cable are observed If heating up beyond the permissible limits occurs, have the mains supply infrastruc- ture checked. Disposing of a charging cable Do not dispose of a charging cable with household rubbish, give it to a suitable recycling service. Abide by the potential legal requirements for recycling. Understanding the vehicle socket Vehicle socket overview G DANGER Connecting the charging cable to the mains supply via incorrectly installed mains sockets or by means of adapters, extension cables or similar could cause a fire or an electric shock. There is a risk of fatal injury. To avoid hazardous situations, observe the following: ROnly connect the charging cable to mains sockets: - which have been properly installed and - which have been inspected by a qualified electrician RFor safety reasons, only use the charg- ing cables supplied with the vehicle, or charging cables which have been approved for use with this vehicle. RNever use a damaged charging cable. RDo not use: - extension cables - extension reels - multiple sockets Charging the high-voltage battery 83

Driving. Z

RNever use socket adapters to connect

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 92 · Applies to: 453

the charging cable to the mains socket.

The only exception being if the adapter

has been tested and approved by the

manufacturer for charging the high-

voltage battery of an electric vehicle.

RObserve the safety notes in the operat-

ing instructions for the socket adapter.

Charge socket flap ; Socket cap = Locking mechanism ? Indicator lamp A Vehicle socket Indicator lamp on the vehicle socket When the indicator lamp on the vehicle socket lights up, this means the following: Indicator lamp Flashes green slowly High-voltage battery is charging. Lights up green High-voltage battery is fully charged. Flashes orange slowly Vehicle waiting for charg- ing to start. Indicator lamp Flashes orange Vehicle is paused from charging. Flashes red quickly A malfunction occurred during charging. Charging the battery at a charging station or wall box Charging stations without communica- tions functionality Charging stations without communications functionality must be activated before charging, e.g. by using an RFID card. Observe the notes provided by the charging station operator. Charging stations with communication capabilities (Plug&Charge) The "Plug&Charge" function is not available in all countries. A suitable electricity contract is required in order to use "Plug&Charge". To arrange this, contact the charging station operator. If the vehicle is connected to a charging station with communication capabilities, information and technical parameters are exchanged so that the charging process can be started without additional activation. This function is called "Plug&Charge". Due to the data transfer, it may take up to 30 seconds after the charging cable is con- nected before charging begins. i International Standard ISO 15118 is used for the communication between the vehicle and the intelligent charging sta- tion. Connecting a charging cable G DANGER Connecting the charging cable to the wallbox via an incorrectly installed wall- box or by means of adapters, extension cables or similar could cause a fire or an electric shock. There is a risk of fatal injury. 84 Charging the high-voltage battery

Driving.

To avoid such risks, observe the follow-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 93 · Applies to: 453

ing:

ROnly connect the charging cable to a

wallbox:

- which has been properly installed

and

- has been inspected by a qualified

electrician

RFor safety reasons, only use charging

cables which have been tested and

approved for charging the high-volt-

age battery of an electric vehicle.

RNever use damaged charging cables.

RDo not connect the charging cable to an

amplifier.

RDo not extend the charging cable.

RNever use an adapter.

RObserve the safety notes in the operat-

ing instructions for the wallbox.

Charge socket flap ; Socket cap = Locking mechanism ? Indicator lamp A Vehicle socket X Wallbox without a pre-installed cable or charging station: before using the charg- ing cable for the first time, remove the adhesive tape which holds the cable together. X Fully unwind the charging cable before charging. X Engage transmission position j. X Turn the key to position u in the igni- tion lock and remove it. X Open socket flap : (Y page 83). X Release locking mechanism = on socket cap ;. Socket cap ; opens. X Wallbox without a preinstalled cable: insert the charging cable connector into the wallbox socket to the stop. X Insert the charging cable connector into vehicle socket A to the stop. The vehicle socket locks audibly. The high-voltage battery is charged and indicator lamp ? on the vehicle socket slowly flashes green. i The high-voltage battery is fully charged when indicator lamp ? on the vehicle socket lights up green. i The vehicle must not be moved during charging. The gear lever cannot be shif- ted from position j. i Depending on the temperature, the engine cooling system and battery cool- ing system may audibly switch on during the charging process. Removing the charging cable The charging cable may be removed when the charging process has completed or has been cancelled. ! Always disconnect the charging cable from the vehicle socket first. Disconnect- ing the charging cable from the station- ary socket first could damage the charg- ing cable connector. X Press the % button on the key. Indicator lamp ? above vehicle socket A goes out. Vehicle socket A unlocks audibly. X Disconnect the charging cable within 60 seconds from vehicle socket A. Other- Charging the high-voltage battery 85

Driving. Z

wise, the vehicle will relock the vehicle

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 94 · Applies to: 453

socket.

The connector locking mechanism on the

charging station is opened.

X Close socket cap ;.

X Close charge socket flap :.

X Wallbox without a pre-mounted cable or

charging station: if necessary, disconnect

the charging cable from the wallbox and

stow it in the charging cable bag

(Y page 88).

Understanding the charging cable for

mains sockets

Useful information

! Only use the charging cable to charge

the high-voltage battery. Do not use the

charging cable for other purposes. It may

otherwise be damaged.

i If you use the mains socket to charge

the high-voltage battery, the charging

time is longer and the electricity con-

sumption is higher. If possible, charge

the high-voltage battery at a wallbox or

a charging station.

Only use a charging cable which is

approved by smart for this vehicle.

Do not leave the charging cable control

panel hanging loose from a mains socket.

Otherwise, this could lead to a bad contact

with the mains socket and to malfunctions

when charging the vehicle.

Never lift or carry the control panel by the

charging cable connector or the mains plug.

Before charging the high-voltage battery at

a mains socket, check the maximum per-

missible charge current for the relevant

mains socket or the building. The maximum

value of the charge current is set to the

country-specific setting for the supplied

charging cable. When charging abroad, the

maximum value may exceed that of the

country you are in. Observe the regulations

specific to the country you are in if charg-

ing abroad. Consult a qualified specialist

workshop if you have questions about

charge current settings or a malfunction.

Control panel on charging cable

Voltage indicator lamp ; Charging process indicator lamp = Indicator lamp temperature monitor ? Electrical fuse and control system indi- cator lamp The indicator lamps on the charging cable indicate the following: Indicator lamp : Lights up white Voltage is switched on. The high-voltage battery can be charged. Indicator lamp ; Flashes green High-voltage battery is charging. Indicator lamp = Lights up red With flashing green indi- cator lamp ;: the charg- ing capacity is reduced as a result of overheating. Without flashing green indicator lamp ;: charg- ing has stopped as a result of the charging cable over- heating. Flashes red Charging has stopped as a result of the mains plug overheating. 86 Charging the high-voltage battery

Driving.

Indicator lamp ?

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 95 · Applies to: 453

Flashes red

quickly

An internal malfunction

has occurred. The high-

voltage battery cannot be

charged.

The infrastructure has a

malfunction. The high-

voltage battery cannot be

charged.

If the control element detects a fault cur-

rent or a malfunction, the charging process

is interrupted. The charging process will be

resumed automatically when the malfunc-

tion has been rectified.

Charging the battery using a mains

socket

Connecting a charging cable

Charge socket flap ; Socket cap = Locking mechanism ? Indicator lamp A Vehicle socket X Fully unwind the charging cable before charging. X Engage transmission position j. X Turn the key to position u in the igni- tion lock and remove it. X Open socket flap : (Y page 83). X Release locking mechanism = on socket cap ;. Socket cap ; opens. X Insert the mains plug into the mains socket to the stop. X Insert the charging cable connector into vehicle socket A to the stop. The vehicle socket locks audibly. The high-voltage battery is charged and indicator lamp ? on the vehicle socket slowly flashes green. i The high-voltage battery is fully charged when indicator lamp ? on the vehicle socket lights up green perma- nently. i The vehicle must not be moved during charging. The gear lever cannot be shif- ted from position j. i Depending on the temperature, the engine cooling system and battery cool- ing system may audibly switch on during the charging process. Removing the charging cable ! Always disconnect the charging cable from the vehicle socket first. Disconnect- ing the charging cable from the station- ary socket first could damage the charg- ing cable connector. The charging cable may be removed when the charging process has completed or has been cancelled. X Press the % button on the key. Indicator lamp ? above vehicle socket A goes out. Vehicle socket A unlocks audibly. X Disconnect the charging cable within 60 seconds from vehicle socket A. Other- wise, the vehicle will relock the vehicle socket. X Close socket cap ;. X Close charge socket flap :. X Remove the charging cable from the mains socket. X Stow the charging cable safely in the charging cable bag (Y page 88). Charging the high-voltage battery 87

Driving. Z

Storing the charging cable

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 96 · Applies to: 453

! The charging cable must be stowed in the charging cable bag only to prevent it from being thrown around inside the vehicle. X Stow the charging cable in the charging cable bag. The charging cable bag is located in the boot (Y page 157). 88 Charging the high-voltage battery

Driving.

Switching on the lighting

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 97 · Applies to: 453

Useful information

The driver must ensure that the light set-

tings match the current weather, light and

traffic conditions.

For reasons of safety, smart recommends

that you drive with the daytime driving

lights or dipped-beam headlamps switched

on even during the daytime.

A warning tone sounds if the lights are still

on when you leave the vehicle.

In some countries, operation of the head-

lamps varies due to legal requirements and

non-compulsory stipulations.

Combination switch control ; Marking Activating automatic headlamp mode G WARNING When the light switch is set to Ã, the dipped-beam headlamps may not be switched on automatically if there is fog, snow or other causes of poor visibility due to the weather conditions such as spray. There is a risk of an accident. In such situations, turn the light switch to L. While the engine is running, the light set- ting is selected automatically according to the brightness of the ambient light. à controls the daytime driving lights, side lamps and dipped-beam headlamps. The automatic headlamp feature is only an aid. The driver is responsible for the vehicle's lighting at all times. X Turn combination switch control : to the à position. When one or more of the following occurs, the lights are switched off automatically: Rthe engine is switched off Rthe driver's door is opened Rthe vehicle is locked Rthe main-beam headlamps are not switched on when the vehicle is station- ary Switching on the dipped-beam head- lamps X Turn combination switch control : to the L position. The L indicator lamp lights up in the instrument cluster. Switching the main-beam headlamps on or off The engine must be running. X Turn the combination switch control to the à or K position. X To switch on: press the combination switch in the direction of arrow 1. X To switch off: move the combination switch back to its normal position. The K indicator lamp in the instrument cluster lights up when the main-beam headlamps are switched on. Switching on the lighting 89

Ensuring good visibility. Z

Using the headlamp flasher

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 98 · Applies to: 453

X Pull the combination switch in the direc-

tion of arrow 2.

Switching on the side lamps

X Turn combination switch control : to

the T position.

Switching the foglamps and rear fog-

lamp on and off

Only vehicles with front foglamps have the

"Foglamps" function.

Combination switch middle ring ; Marking Switch on the ignition and either the side lamps or the dipped-beam headlamps in order to switch on the foglamps. Start the engine and switch on either the side lamps or dipped-beam headlamps in order to switch on the rear foglamps. X To switch on or off manually: turn combi- nation switch middle ring : to the desired marking: RO Foglamps RR Rear foglamps After releasing, the combination switch middle ring returns automatically to the neutral position. The foglamps and rear foglamps also switch off automatically in the following situa- tions: Rthe lights are switched off Rthe engine is switched off and the control is in the à position Using the cornering light function Only vehicles with the LED & Sensor pack- age are equipped with the "Cornering light function". The cornering light function uses the front foglamps to improve the illumination of the road in the direction in which you are turn- ing, enabling better visibility in tight bends, for example. The following conditions must be fulfilled for the cornering light function to switch on automatically: Rthe dipped-beam headlamps are switched on Rthe vehicle is moving at less than 40 km/h Rthe turn signal indicator is switched on or the steering wheel is turned Adjusting the lighting Adjusting the headlamp range The vehicle load can affect the headlamp range. This can impair visibility, and the headlamps can dazzle oncoming traffic. The ignition must be switched on in order to set the headlamp range. X Turn headlamp range adjuster : to the position which corresponds to the load in your vehicle. Positions for the vehicle load: Rg: Driver's seat occupied or driver's seat and front-passenger seat occupied R1: All seats occupied 90 Adjusting the lighting

Ensuring good visibility.

R2: All seats occupied and luggage com-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 99 · Applies to: 453

partment laden R3: Driver's seat occupied and luggage compartment laden Adjusting the dipped-beam head- lamps to left-hand or right-hand traffic The symmetrical dipped-beam headlamps are required when travelling in countries where vehicles are driven on the opposite side of the road to that in which the vehicle is registered. Unlike the asymmetrical dipped-beam headlamps, these headlamps do not dazzle oncoming traffic. Symmetrical dipped-beam headlamps provide less illu- mination to the edge of the carriageway. X Open the service cover. X For symmetrical dipped beam: turn the screws of both headlamps as far as they will go to position ±. For asymmetrical dipped beam: turn the screws of both headlamps as far as they will go to position q. X Have the dipped-beam headlamp setting checked at a qualified specialist work- shop. Using the interior lighting Switching the interior lighting on and off The interior lighting goes on when you unlock the doors. The interior lighting switches off in the fol- lowing situations: RA door is opened and 15 minutes have passed. RAll doors are closed, the vehicle has been locked and 15 seconds have passed. RAll doors are closed, the vehicle has not been locked and 4 minutes have passed. RThe engine has been started. The interior lighting can be activated when a door is open. After closing the doors, the interior lighting goes out. X Press switch : to switch the left-hand reading lamp on and off. X Move switch ; to the desired position. The following settings can be selected: RInterior lighting is switched on. RInterior lighting controlled automati- cally. RInterior lighting is switched off. X Press switch = to switch the right-hand reading lamp on and off. Adjusting the ambient lighting (colour display) On-board computer with colour display: the ambient lighting is set in the on-board computer (Y page 114). Using the interior lighting 91

Ensuring good visibility. Z

Using the windscreen wipers

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 100 · Applies to: 453

Switching on the windscreen wipers Please note ! Do not operate the windscreen wipers when the windscreen is dry, as this could damage the wiper blades. Moreover, dust that has collected on the windscreen can scratch the glass if wiping takes place when the windscreen is dry. If it is necessary to switch on the wind- screen wipers in dry weather conditions, always operate them using washer fluid. ! Vehicles with a rain sensor: if the wind- screen becomes dirty in dry weather con- ditions, the windscreen wipers may be activated inadvertently. This could dam- age the windscreen wiper blades or scratch the windscreen. For this reason, you should always switch off the windscreen wipers in dry weather. ! Make sure that the windscreen wipers are free of ice. Otherwise the wiper motor may overheat. Wiper blades are subject to wear and tear. smart recommends replacing the wiper blades twice a year. Worn or damaged windscreen wiper blades cause smearing on the windscreen. On vehicles with a rain sensor, malfunctions may occur as a result of this. Switching continuous wipe on and off : Control for wipe frequency g Continuous wipe, off à Automatic wipe 1 Continuous wipe, slow 2 Continuous wipe, fast î Wiping with washer fluid To operate the windscreen wipers, the igni- tion must be switched on. X Press the combination switch down or up to the desired position. Automatic wiping (vehicles with rain sensor) The rain sensor is only an aid. The driver is responsible for ensuring unimpaired vision. X Press the combination switch to the à position. In automatic wiping mode, the appropriate wipe frequency is set according to the intensity of the rain. X Use control : to set the wipe frequency. Switching on intermittent wiping X Press the combination switch to the à position. X Use control : to set the wipe frequency. Wiping with washer fluid X Pull the combination switch in the direc- tion of arrow î. Switching the rear window wiper on/off To operate the rear window wiper, the igni- tion must be switched on. X Turn the outer control on the combina- tion switch to the desired position: 92 Using the windscreen wipers

Ensuring good visibility.

The following settings can be selected:

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 101 · Applies to: 453

Rg Rear window wiper, off

Rè Rear window wiper, on

Rî Wiper with washer fluid

Switching the rear window wiper

on/off when in reverse gear

You can switch the "Automatic rear window

wiper when reversing" setting on or off in

the smart Media-System. The rear window

wiper is automatically activated for a short

while when the ignition is switched on, the

window wipers are switched on and reverse

gear is engaged.

X In the smart Media-System, select Vehi‐

cle > Settings > Auto rear wipe with

reverse gear.

The selected setting is highlighted.

X Confirm the setting with Done.

Folding the sun visor to the side

Mirror cover ; Bracket = Retaining strap ? Vanity mirror X Fold the sun visor down. X Pull the sun visor out of retainer ;. X Fold the sun visor to one side Folding the sun visor to the side 93

Ensuring good visibility. Z

Locking and unlocking the vehicle

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 102 · Applies to: 453

from the inside Using the door handle to unlock the door X Pull door handle :. If the vehicle has previously been locked with the key, opening a door from the inside will trigger the anti-theft alarm system. To disable the alarm, switch on the ignition. Centrally locking and unlocking the vehicle from the inside G WARNING If children are left unsupervised in the vehicle, they can: Ropen doors and endanger other persons or road users Rclimb out and be injured by the traffic Roperate vehicle equipment and, for example, trap themselves. Children could also set the vehicle in motion, for example by: Rreleasing the parking brake Rshifting the automatic transmission out of park position P Rstarting the engine. There is a risk of an accident and injury. When leaving the vehicle, always take the key with you and lock the vehicle. Never leave children unattended in the vehicle. Always keep the key out of reach of children. X To lock: press button :. When the doors are locked, indicator lamp ; lights up. X To unlock: press button :. Activating/deactivating the automatic locking feature The activated automatic locking feature locks the vehicle automatically when the ignition is switched on and the vehicle is moving. X When the engine is running, press and hold button : for 5 seconds until a tone sounds. Repeat the procedure to deactivate the automatic locking feature. When the automatic locking feature is activated, the locking mechanism engages audibly when you pull away. When the automatic locking feature is deactivated, no sound occurs. Activating the double-lock function For United Kingdom only: the double-lock function prevents the doors from being opened from the inside. G WARNING When the double locks are activated, the doors can no longer be opened from the inside. People in the vehicle can no lon- ger get out, e.g. in hazardous situations. There is a risk of injury. 94 Locking and unlocking the vehicle from the inside

Feeling comfortable in the vehicle interior.

Therefore, do not leave any people unsu-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 103 · Applies to: 453

pervised in the vehicle, particularly chil- dren, elderly people or people in need of special assistance. Do not activate the double lock when people are in the vehi- cle. G WARNING If persons (particularly children) are exposed to heat or cold for a prolonged period, there is a risk of serious or even fatal injuries. Never leave persons (par- ticularly children) unattended in the vehicle. X Press button : twice. The double-lock function is enabled. Understanding the reversing function The side windows are equipped with an automatic reversing function. If a solid object blocks or restricts a side window from closing during automatic operation, the side window opens again automatically. During the manual closing process, the side window only opens again automatically after the corresponding switch is released. The automatic reversing function is only an aid. The driver is responsible for operating the side windows safely. G WARNING The reversing feature does not react: Rto soft, light and thin objects, e.g. fin- gers Rwhile adjusting This means that the reversing feature cannot prevent someone being trapped in these situations. There is a risk of injury. When closing, make sure that no body parts are in the closing area. If someone becomes trapped, press the W button to open the side window again. Opening and closing the windows Please note G WARNING While closing the side windows, body parts in the closing area could become trapped. There is a risk of injury. When closing make sure that no parts of the body are in the closing area. If some- body becomes trapped, release the switch or press the switch to open the side win- dow again. G WARNING Children could become trapped if they operate the side windows, particularly when unattended. There is a risk of injury. When leaving the vehicle, always take the key with you and lock the vehicle. Never leave children unattended in the vehicle. G WARNING If you close a side window again immedi- ately after it has been blocked or reset, the side window closes with increased or maximum force. The reversing function is then not active. Parts of the body could be trapped in the closing area in the process. This poses an increased risk of injury or even fatal injury. Make sure that no parts of the body are in the closing area. To stop the closing process, release the switch or push the switch again to reopen the side window. The switches for both side windows are located on the driver's door. There is also a switch for the front-passenger window on the front-passenger door. The switch on the driver’s door takes precedence. Opening and closing the windows 95

Feeling comfortable in the vehicle interior. Z

Opening and closing the windows

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 104 · Applies to: 453

Left side window ; Right side window X To open: press the switch. X To close: pull the switch. Opening and closing windows fully in automatic mode X To open the windows fully, press the switch beyond the point of resistance and release it. X To close the windows fully, pull the switch beyond the point of resistance and release it. X To stop automatic operation, press the switch again. Opening and closing the hinged win- dows of rear doors Opening the hinged windows X Fold the lever forwards. X Use the lever to push the hinged window out to the stop. X Push the lever back until as far as it will go. Closing the hinged windows X Fold the lever forwards. X Use the lever to pull in the hinged win- dow. X Push the lever back until as far as it will go. Opening and closing the folding top G WARNING During opening and closing, body parts in the sweep of the folding top can get trapped. There is a risk of injury. When opening and closing make sure that no parts of the body are in the sweep. Release the switch immediately if some- body becomes trapped. The opening or closing will stop. G WARNING Children could become trapped if they operate the folding top, particularly when unattended. There is a risk of injury. When leaving the vehicle, always take the key with you and lock the vehicle. Never leave children unattended in the vehicle. ! Only open the folding top if it is free of snow and ice. Otherwise, malfunctions may occur. Do not allow anything to protrude from the folding top. Otherwise, the seals could be damaged. 96 Opening and closing the folding top

Feeling comfortable in the vehicle interior.

To open or close the folding top, the igni-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 105 · Applies to: 453

tion must be switched on. X To open: press the switch to position : until the folding top is in the desired position. X To close: press the switch to position ; until the folding top is in the desired position. i It is possible to open or close the fold- ing top while driving at speeds of up to 100 km/h. Operating the climate control system Useful information The climate control system is only availa- ble when the ignition is switched on. If the climate control system is deactivated, the air supply and circulation are switched off. The windows could mist up. You should therefore switch off the climate control system for brief periods only. In air-recirculation mode, only the air inside the vehicle is recirculated and no fresh air is introduced. This is useful in a tunnel or when there are unpleasant odours outside the vehicle. In air-recirculation mode, the windows may mist up more quickly, particularly when the outside tem- perature is low. Therefore, switch on air- recirculation mode only briefly. The integrated filter in the climate control system keeps out most particles of dust as well as pollen. The filter reduces the amount of air supplied to the vehicle inte- rior. For this reason, always observe the interval for replacing the filter. Operating the automatic climate con- trol system Switching the automatic climate control system on/off The ignition must be switched on in order to operate the blower. The engine must be running in order to operate all the func- tions of the automatic climate control sys- tem. X To switch on: press the à button. The indicator lamps below à and ¿ light up. X To switch off: press the ^ button. The indicator lamp below ^ lights up. Setting the temperature X Move the slider in small increments to the left or right. In automatic mode, the set temperature is maintained at a constant level. The air dis- tribution and blower speed are regulated automatically. Setting and switching the air distribu- tion off X Press one or more of the buttons. The following options can be selected: R¯ Demister vents RP Centre and side air vents RO Footwell vents Increasing the blower speed X Press the K button. Operating the climate control system 97

Feeling comfortable in the vehicle interior. Z

Decreasing the blower speed

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 106 · Applies to: 453

X Press the I button. Switching air-recirculation mode on/off X Press the À button. The indicator lamp above À lights up when air-recirculation mode is activated. Switching "Cooling with air dehumidifi- cation" on or off The "Cooling with air dehumidification" function cools and dehumidifies the air inside the vehicle during warm weather. The engine must be running in order to use "Cooling with air dehumidification". X To switch on: press the K and ¿ button. The indicator lamp below ¿ lights up when the function is activated. In damp weather, only switch off the "Cool- ing with air dehumidification" function briefly. Otherwise the windows can mist up more quickly. Demisting the windscreen X Press the ¬ button. The indicator lamp above ¬ lights up when the windscreen is being demisted. Use this setting only until the windscreen is clear again. Demisting the rear window When the rear window heating is activated, the exterior mirrors are also heated. X Press the ¤ button. The indicator lamp above ¤ lights up when the rear window heating is activa- ted. Use this setting only until the rear window is clear again. Drying windows that are misted up on the inside X Press the ¿ button. X Press the à button. X If the windows are still misted up, press the ¬ button. Use this setting only until the windows are clear again. Drying windows that are misted up on the outside X Switch on the windscreen wipers. X Press the ¬ button. Use this setting only until the windows are clear again. Setting the pre-entry climate control at departure time using the on-board computer Only for instrument cluster with colour dis- play: The "Pre-entry climate control at departure time" function heats or cools the vehicle interior before the scheduled departure time. The climate control runs until approx. 10 minutes after the set departure time. The vehicle must be connected to the charger in order to activate pre-entry cli- mate control. The battery charge status and the charge output of the high-voltage bat- tery must be sufficient. If pre-entry climate control cannot be operated, a display message is shown in the on-board computer. X Call up Pre-heat/cool and charge in the on-board computer. X Press a. X Select the setting. The following settings can be selected: RNo pre-selection The pre-entry climate control is deac- tivated. RTwo stored departure times X Select Departure time > Activate to acti- vate the stored departure time. If Smart- Charging was selected before, this set- ting is also activated. 98 Operating the climate control system

Feeling comfortable in the vehicle interior.

X Select Departure time > Change to change

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 107 · Applies to: 453

the settings of a stored departure time. X Set the value. X Select Smart-Charging or instant charging. A display message is shown with the selected settings. If Smart-Charging is selected, the high- voltage battery charges at minimum cost while also conserving battery life. Depending on the set departure time, charging of the high-voltage battery may not start immediately or may be inter- rupted during the charging process. i The charging station must support the transmission of tariff information in order for the optimised charging process with Smart-Charging to be possible. If the charging station does not provide tariff information, set the preferred charging times on the "smart control" website. i If instant charging is selected, the high-voltage battery is charged regard- less of the cost information. A part of the charging may not be conducted until one to two hours before the departure time in order for temperature control of the high-voltage battery to be carried out for the intended departure time. Activating immediate pre-entry climate control using the smart control app Pre-entry climate control can be activated immediately using the smart control app. The vehicle's charge status must be at least 30%. Climate control is started immediately and limited to five minutes. The procedure cannot be cancelled, but may be carried out several times. Adjusting the air vents Please note G WARNING Very hot or very cold air can flow from the air vents. This could result in burns or frostbite in the immediate vicinity of the air vents. There is a risk of injury. Make sure that all vehicle occupants always maintain a sufficient distance to the air outlets. If necessary, redirect the airflow to another area of the vehicle interior. G WARNING If you pour cleaning fluid or disinfectant into the vehicle's ventilation system, it may ignite. There is a risk of fire. Never spray these or other agents into the ventilation system. Always have work on the ventilation system carried out at a qualified specialist workshop. Keep the following rules in mind for optimal climate control: RKeep the air slots between the service cover and windscreen clear of blockages. RDo not cover the vents or ventilation grilles in the vehicle interior. ROpen the air vents fully. Opening and closing the air vents X To open 1: turn the vent outwards. X To close 2: turn the vent inwards. Directing the air vents X Turn the air vents upwards, downwards, to the left or to the right as desired. Operating the climate control system 99

Feeling comfortable in the vehicle interior. Z

Activating/deactivating the seat

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 108 · Applies to: 453

heating and steering wheel heating G WARNING Repeatedly switching on the seat heating can cause the seat cushion, the backrest pad and parts of the steering wheel to become very hot. The health of persons with limited temperature sensitivity or a limited ability to react to higher temper- atures may be affected or they may even suffer burn-like injuries. There is a risk of injury. Therefore, do not switch the seat heating on repeatedly. ! When the seat heating is switched on, the seat surface can be damaged as a result of objects being placed on the seats, for example, seat cushions, child seats and protective covers not approved by Mercedes-Benz. Ensure that there are no objects on the seat surface when the seat heating is switched on. The seat heating only works when the igni- tion is switched on. Vehicles with the Win- ter package are additionally equipped with "Steering wheel heating" function : and the "Rear seat heating" function. The rear seat heating buttons are located on the surface of the rear seat armrests. X Press button =. Indicator lamp ; lights up when seat heating is activated. Vehicles with the Winter package: steer- ing wheel heating : is also switched on when the driver's seat heating is activa- ted. Using the accessories Using the cigarette lighter G WARNING You can burn yourself if you touch the hot heating element or the socket of the cigarette lighter. In addition, flammable materials can ignite if: Rthe hot cigarette lighter falls Ra child holds the hot cigarette lighter to objects, for example There is a risk of fire and injury. Always hold the cigarette lighter by the knob. Always make sure that the ciga- rette lighter is out of reach of children. Never leave children unattended in the vehicle. The cigarette lighter only works when the ignition is switched on. X Press cigarette lighter :. When cigarette lighter : is hot, it pops up automatically. Using the ashtray ! The cup holder in the centre console is not heat resistant. Before placing lit cig- arettes in the ashtray, make sure that the ashtray is fully inserted in the cup 100 Using the accessories

Feeling comfortable in the vehicle interior.

holder. Make sure that lit cigarettes do

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 109 · Applies to: 453

not fall into the cup holder. Otherwise, the cup holder could be dam- aged. X To open: lift up cover :. X To close: push down cover :. X To remove: pull the ashtray up and out. X To insert: insert the ashtray into the cup holder. Using the 12 V socket X Turn the key to position 1 in the igni- tion lock. X Lift up the cover of socket :. X Connect the device. The socket can be used for accessories up to a maximum draw of 120 W (15 A). If you use the socket for very long periods when the engine is switched off, the 12 V battery may discharge. Fitting and removing the floor mats G WARNING Objects in the driver's footwell may restrict the clearance around the pedals or block a depressed pedal. This jeopard- ises the operating and road safety of the vehicle. There is a risk of an accident. Stow all objects securely in the vehicle so that they do not get into the driver's footwell. Always fit the floormats securely and as prescribed in order to ensure that there is always sufficient room for the pedals. Do not use loose floormats and do not place several floor- mats on top of one another. X Slide the driver's seat backwards. X To install: press securing knobs : onto retainers ;. X To remove: release securing knobs : from retainers ;. Tablet bracket for iPad Air® Useful information iPad Air® tablets can be attached to the back of the front seats using the tablet bracket in the rear. The tablet bracket offers the following functions: RThe attachment can be rotated 180° allowing the iPad® to be used in portrait or landscape mode. RThe attachment can be gently tilted allowing individual setting. Using the accessories 101

Feeling comfortable in the vehicle interior. Z

Please note

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 110 · Applies to: 453

G WARNING The iPad® distracts the driver from the traffic situation. This could cause the driver to lose control of the vehicle. There is a risk of an accident. The driver must never use the iPad® while driving. Always keep the iPad® away from the driver's field of vision. G WARNING A bracket fitted in the vehicle without an attachment could be thrown around and thereby hit vehicle occupants, for exam- ple in the event of an accident, braking or a sudden change in direction. There is a risk of injury. Make sure that the entire tablet bracket is securely mounted in the fitting. When removing the iPad® or the attach- ment, remove the entire tablet bracket. ! When adjusting and folding the seats with the tablet bracket mounted, contact with adjacent components may occur. If a charging cable is connected to the tablet bracket, the charging cable or the USB port may be damaged. In order to avoid damage adjust the seats with the appropriate caution. When folding down the rear bench seat, ensure that the rear bench seat does not collide with the tablet bracket. You must observe the legal requirements for the country in which you are currently driving when operating the tablet bracket for iPad Air®. Further information on the tablet bracket is available from any smart centre. Mounting the tablet bracket i Before mounting, ensure that no objects, e.g. coat hangers, are on the headrests. X Mount bracket : on the back of attach- ment ; until bracket : audibly engages. X Insert tablet bracket ? with the bracket forwards into fitting = until the tablet bracket audibly engages. Affixing protective film G WARNING The display of the iPad® may shatter in an accident. If there is no protective film on the display, you or other passengers may receive eye injuries, for example, caused by fragments. There is a risk of injury. Ensure that the protective film is affixed to the display. 102 Using the accessories

Feeling comfortable in the vehicle interior.

i To avoid air bubbles or dirt getting

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 111 · Applies to: 453

under the surface, observe the following tips: RDo not bend the protective film. RDo not touch the adhesive surface of the protective film. RUse disposable gloves to affix the pro- tective film. X Carefully clean the display of the iPad®. X The adhesive surface of the protective film is protected by a thin transparent backing film. Peel off half the backing film from the protective film. X Affix the upper edge of the protective film to the edge of the display by applying gentle pressure. X Slowly peel off the backing film from the protective film. At the same time, care- fully apply pressure to the protective film with a suitable implement or plastic card such as a credit card and smooth over the surface. If air bubbles or dirt particles are present after attaching the protective film, proceed as follows: X Carefully remove the protective film from the display. X Remove dust and impurities. X Attach the protective film once again. Inserting an iPad Air® X Turn attachment : so that the opening faces the vehicle interior. X Insert iPad® with Lightning connec- tion ; first into the attachment until the attachment audibly locks. X Move the attachment to the desired posi- tion. Charging the iPad Air® via the USB port The iPad Air® can be charged via the USB port on the tablet bracket. This additionally requires: Ra suitable USB adapter for the 12 V socket Ra suitable USB data cable for the USB adapter and USB port on the tablet bracket X Insert the USB adapter into the 12 V socket. X Connect the USB data cable to the USB adapter and the USB port on the tablet bracket. Removing an iPad Air® i The iPad® is not designed for the extreme temperatures which can be reached in a vehicle and may be dam- aged. For this reason, it is not recommen- ded to leave the iPad® in a parked vehi- cle. Using the accessories 103

Feeling comfortable in the vehicle interior. Z

X Turn the attachment so that the opening

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 112 · Applies to: 453

faces the vehicle interior. X Press button ; on the back of the tablet bracket. The attachment unlocks and the iPad® is pushed a little out of the bracket. X Remove iPad® :. Dismantling the tablet bracket X Press button ; on the bracket. X Pull the tablet bracket out of the fitting. X To remove the bracket from the attach- ment, press release button : on the attachment. 104 Using the accessories

Feeling comfortable in the vehicle interior.

Parking

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 113 · Applies to: 453

Please note G WARNING When the engine is switched off, the automatic transmission shifts into neu- tral position N. The vehicle may roll away. There is a risk of an accident. Always shift to parking position P before switching off the engine. Secure the parked vehicle against rolling away by applying the parking brake. ! Always secure the vehicle correctly against rolling away. Otherwise, the vehicle or its drivetrain could be dam- aged. Parking the vehicle X Apply the parking brake. X Shift the transmission to position j. X Turn the key to position u in the igni- tion lock and remove it. X On steep uphill or downhill gradients, turn the front wheels towards the kerb. X Lock the vehicle. Using the parking aid Useful information ! Pay attention to people and obstacles when manoeuvring or parking the car. The driver is responsible in these situa- tions. The electronic parking aid gives an acous- tic indication of the distance between the vehicle and an obstacle behind it. The parking aid uses three sensors : in the rear bumper to monitor the area around the vehicle. The parking aid measures the distance between the vehicle and an obstacle. If the proximity to the object behind the vehicle is less than 1.20 m, a short signal is issued. If the object is less than 30 cm away, a con- tinuous warning tone is issued. The parking aid might not function cor- rectly under the following circumstances: Rthe vehicle is on uneven terrain Rif there are obstacles below or above the sensor detection range Rthe vehicle is on snow or near objects that absorb ultrasonic waves Rthe vehicle is near strong ultrasonic sources, such as pneumatic hammers If you engage reverse gear while the engine is running, the parking aid is activated. Activating and deactivating the park- ing aid The parking aid is automatically activated when you start the engine. Using the parking aid 105

Parking and getting out. Z

X Press the c switch.

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 114 · Applies to: 453

When the parking aid is deactivated, the LED on the c switch lights up. Using the reversing camera Please note The reversing camera is only an aid. It is not a substitute for your attention to the immediate surroundings. The responsibil- ity for safe manoeuvring and parking remains with you. Make sure that there are no persons, animals or objects etc., in the manoeuvring area while manoeuvring or parking. ! If the rear of your vehicle is damaged, consult a qualified specialist workshop and have the reversing camera checked. ! Objects that are not at ground level appear further away than they actually are, for example: Rthe bumper of the vehicle parked behind Rthe drawbar of a trailer Rthe ball coupling of a trailer tow hitch Rthe tail-end of a lorry Rslanted posts Only use the image from the reversing camera as a guide. You may otherwise damage your vehicle and/or the object. Understanding the reversing camera functions ! Pay attention to people and obstacles when manoeuvring or parking the car. The driver is responsible in these situa- tions. ! If the rear of your vehicle is damaged, consult a qualified specialist workshop and have the reversing camera checked. The reversing camera is a visual parking and manoeuvring aid. It shows the area behind your vehicle with guide lines in the smart Media-System display. Reversing camera : is located in the smart logo in the tailgate. The area behind the vehicle is displayed as a mirror image in the smart Media-System display. The reversing camera may show a distorted view of obstacles or show them incorrectly or not at all if: Rthe obstacle is very close to the rear bumper Rthe obstacle is underneath the rear bumper Rthe obstacle is close to the tailgate han- dle Rthe reversing camera is covered by addi- tional accessories, e.g. a bicycle rack Rthe reversing camera function is impaired due to pixel errors The function of the reversing camera is limited: Rif the tailgate is open Rif there is heavy rain, snowfall or fog Rif the light conditions are too dark or too bright Rif there is fluorescent light shining, e.g. under fluorescent lamps or LED lighting Rif the outside temperature changes quickly Rif the camera lens is dirty, obstructed or misted up(Y page 171) Rif the camera or the rear of your vehicle is damaged i The display contrast may be impaired due to incident sunlight or other light sources, e.g. if the vehicle is being driven out of a garage. In this case, pay special attention. 106 Using the reversing camera

Parking and getting out.

i The use of the display can be consider-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 115 · Applies to: 453

ably restricted due to pixel errors, for

example. In this case have the display

repaired or replaced.

Guide lines in the display

Useful information

! Objects that are not at ground level

appear further away than they actually

are, for example:

Rthe bumper of the vehicle parked

behind

Rthe drawbar of a trailer

Rthe ball coupling of a trailer tow hitch

Rthe tail-end of a lorry

Rslanted posts

Only use the image from the reversing

camera as a guide. You may otherwise

damage your vehicle and/or the object.

Guide lines in different colours show the

distance of obstacles from the rear of the

vehicle. Static guide lines do not change

when the steering wheel is turned. Dynamic

guide lines change depending on the posi-

tion of the steering wheel.

Static: vehicle width including exterior mirrors ; Green, static: approx. 1.50 m = Yellow, static: approx. 0.7 m ? Red, static: approx. 0.3 m A Blue, dynamic: vehicle width including exterior mirrors The distance specifications only apply to objects that are at ground level. Switching on the reversing camera The ignition must be switched on to use the reversing camera. X In the smart Media-System, select Vehi‐ cle > Settings > Rear view camera > Rear camera view settings > Rear cam‐ era view. X Confirm with Done. X Engage reverse gear. The area behind the vehicle is shown with guide lines in the smart Media-Sys- tem display. Switching off the reversing camera The reversing camera switches off after driving forwards briefly. Adjusting the reversing camera set- tings X In the smart Media-System, select Vehi‐ cle > Settings > Rear view camera > Rear camera view settings. The following settings can be selected: RSwitch Rear camera view on or off. RSwitch Static guidelines on or off. RSwitch Dynamic guidelines on or off. X Select desired settings. X Confirm with Done. Adjusting reversing camera display settings X In the smart Media-System, select Vehi‐ cle > Settings > Rear view camera > Image settings. X Adjust the values for Brightness, Satu‐ ration and Contrast. X Confirm the display settings with Done. Using the reversing camera 107

Parking and getting out. Z

Locking the vehicle

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 116 · Applies to: 453

G WARNING If children are left unsupervised in the vehicle, they could: Ropen doors, thereby endangering other persons or road users Rget out and be struck by oncoming traffic Roperate vehicle equipment and become trapped, for example In addition, the children could also set the vehicle in motion by, for example: Rreleasing the parking brake Rshifting the transmission out of park position P Rstarting the vehicle's drive system There is a risk of an accident and injury. When leaving the vehicle, always take the key with you and lock the vehicle. Never leave children and animals unat- tended in the vehicle. Keep the keys out of the reach of children. X Press the & button on the key. The turn signals flash twice. Priming and deactivating the anti- theft alarm system Useful information The immobiliser prevents the vehicle from being started without the correct key. It is switched on and off automatically. The anti-theft alarm system triggers a vis- ual and audible alarm if a door, the tailgate or the service cover is opened. The alarm is not switched off, even if, for example, you close the open door that has triggered it. Priming X Close the doors. X Close the tailgate. X Close the service cover. X Press the & button on the key. The alarm system is primed after approx- imately 30 seconds. Deactivating and switching off the alarm X Press the % button on the key. 108 Priming and deactivating the anti-theft alarm system

Parking and getting out.

Overview of the on-board computer

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 117 · Applies to: 453

Please note

G WARNING

If you operate information and communi-

cation equipment integrated in the vehi-

cle when driving, you could be distracted

from the traffic situation. This could also

cause you to lose control of the vehicle.

There is a risk of an accident.

Only operate this equipment when the

traffic situation permits. If you cannot be

sure of this, stop the vehicle paying

attention to road and traffic conditions

and operate the equipment with the vehi-

cle stationary.

G WARNING

If the instrument cluster has failed or

malfunctioned, you may not recognise

function restrictions relevant to safety.

The operating safety of your vehicle may

be impaired. There is a risk of an acci-

dent.

Drive on carefully. Have the vehicle

checked at a qualified specialist work-

shop immediately.

If the operating safety of your vehicle is

impaired, you must park the vehicle safely

as soon as possible. Consult a qualified

specialist workshop.

Display messages and displays in the

instrument cluster are only shown for cer-

tain systems. Vehicle owners and drivers

are responsible for ensuring that the vehi-

cle is operating safely. A vehicle which is

not operating safely can cause an accident.

The display shows the outside temperature

on the far right in the header. Drivers must

pay special attention to road conditions

when temperatures are around freezing

point. Changes in the outside temperature

are displayed after a short delay.

After opening the door, the on-board com-

puter is activated for approximately

15 minutes. To permanently activate the

on-board computer, the ignition must be

switched on.

Monochrome display overview

Time

; Transmission display

= Lane Keeping Assist indicator lamp

? Outside temperature display and black

ice warning Ò

A Trip meter, remaining range, service

display

B Tyre pressure monitor

C eco score display

D Brake light failure warning lamp

E Total distance recorder

F Cruise control, limiter

Colour display overview

Time ; Lane Keeping Assist indicator lamp = Digital speedometer ? Outside temperature display with black ice warning Ò A Display field for display messages, menus and lists B Remaining range C ECO mode, radar-based recuperation Overview of the on-board computer 109

Operating the on-board computer. Z

D Transmission display

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 118 · Applies to: 453

E Cruise control, limiter

Calling up displays

Calling up displays (monochrome dis-

play)

Monochrome display

; Buttons on the multifunction lever

X To scroll forward at menu level, briefly

press the ´ button on multifunction

lever.

X To directly call up the trip meter, press

and hold the ´ button on multifunc-

tion lever.

X Press and hold a on the multifunction

lever to reset the values.

The following displays can be called up one

after another:

Rtrip meter

Rremaining range

Rservice due date

Rsetting the time

Ractivating/deactivating Active Brake

Assist

Rrestarting the tyre pressure monitor

Calling up displays (colour display)

Calling up displays

Colour display ; Left control panel X Briefly press 9 or : on left control panel ;, to scroll forwards or backwards. X Press and hold 9 or : on left con- trol panel ;, to directly call up the Dis‐ tance display. The following displays can be called up one after another: RDistance RTrip computer from start RTrip computer from reset Reco score from start REnergy consumption bar chart REnergy flow RPre-heat/cool and charge RMessages and service RSettings RDigital speedometer 110 Calling up displays

Operating the on-board computer.

Distance display

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 119 · Applies to: 453

Trip meter

; Total distance recorder

Trip computer display

Elapsed time

; Distance

= Average speed

? Average energy consumption

The data in the from start menu refers to

the start of the journey, whilst the data in

the from reset menu refers to the last time

the submenu was reset.

If the ignition remains switched off for lon-

ger than four hours, the from start values

in the instrument cluster are reset. The eco

score display is also reset automatically.

eco score display

The eco score display provides feedback on

how economical the driver's driving behav-

iour is (Y page 75).

If the ignition remains switched off for lon-

ger than four hours, the eco score display

will be automatically reset.

When the eco score display is reset, the

from start trip computer in the smart

Media-System and the eco score display are

also reset in the smart Media-System.

Energy consumption bar chart display

Energy consumption

; Recuperation

The display shows the average energy con-

sumption and recuperation over the previ-

ous 15 minutes.

Energy flow display

Total output ; Output for electrical consumers The total output shows the driver the sum of the energy currently flowing from the battery. The colour of the battery shows whether energy is being consumed or recu- perated: RBattery symbol is orange: energy is being consumed. RBattery symbol is green: energy is being recuperated. RBattery symbol is grey: energy consump- tion and recuperation are equal or both at 0 kW. The output for electrical consumers shows the driver what output is needed to operate electrical consumers, e.g. climate control systems or the radio. If the value is kept as low as possible, a greater range is achieved. Calling up displays 111

Operating the on-board computer. Z

Pre-entry climate control and charging

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 120 · Applies to: 453

display

Time of the full charge

; Charge status of the battery

= Departure time

? Smart-Charging

A Charge current and charge output

An arrow underneath the battery indicates

the charge status of the battery at the

departure time. The charge status and the

time of complete charge are only predicted

approximately. The time of complete charge

cannot be displayed when Smart-Charging

has been activated.

Information on the "Pre-entry climate con-

trol at departure time" function (Y page 98).

Messages and service display

Message memory ; Next service due date The display shows the number of display messages in the message memory and the next service due date. ¯ indicates a minor service. ° indi- cates a major service. To show the display messages, the ignition must be switched on. X Press a to scroll through the display messages. Current information on the type of service can be obtained at a smart centre or a qualified specialist workshop. Digital speedometer display The display shows the digital speedometer. The digital speedometer in the header is hidden. United Kingdom only: the digital speedom- eter in the header continues to be dis- played. Setting values Setting values (monochrome display) Setting the time X Press ´ repeatedly until ° is shown next to the time. X Press a until the hour display flashes. X Set the values. Activating/deactivating Active Brake Assist X Press ´ several times until Ä and ° are displayed. X Press a until ON or OFF appears below Ä. The ^ indicator lamp lights up when Active Brake Assist is deactivated. Resetting values The trip meter display and eco score dis- play can be reset. X Scroll to the desired display. X Press a for three seconds. Setting values (colour display) Setting values 112 Setting values

Operating the on-board computer.

X Press 9 or : to scroll to Settings.

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 121 · Applies to: 453

X Press 9 or : to scroll to the desired menu. X Press 9 or : to set the desired value. X Press a to confirm. Resetting values To reset the values in the respective dis- plays, select the following: X Press a. X Select yes and press a to confirm. Setting the time X Select Settings > Time > Set the time. X Set the values. Vehicles with smart Media-System: if available, the time and time format are set in the smart Media-System. Setting the time format X Select Settings > Time > Time format (12/24 h). X Set the value. Adjusting the instrument lighting X Select Settings > Display > Display/ switch brightness. X Set the value. Displaying the digital speedometer in the header X Select Settings > Display > Digital speedometer. X Select the Disp. addit. dig. speedo. function. The digital speedometer is displayed in the header. UK only: the digital speedometer in the header cannot be hidden. Setting the unit for speed in the digital speedometer X Select Settings > Display > Digital speedometer > Unit. X Set the value. The following values are set: RDigital speedometer display RDigital speedometer in the header UK only: only the display unit of the digital speedometer is set. Setting the unit of measurement for distance X Select Settings > Display > Units of distance. X Set the value. Setting the temperature unit of meas- urement X Select Settings > Display > Units of temperature. X Set the value. Switching radar-based recuperation off and on To switch on radar-based recuperation, the conditions for activation must be fulfilled and the ignition must be switched on. X Select Settings > Radar assist. recu‐ peration > on or off. Information on radar-based recuperation (Y page 72). Activating/deactivating Active Brake Assist The ignition must be switched on in order to set Active Brake Assist. X Select Settings > Active Brake Assist > on or off. Information on Active Brake Assist (Y page 59). Setting values 113

Operating the on-board computer. Z

Starting the tyre pressure monitor

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 122 · Applies to: 453

X Select Settings > Tyre pressure moni‐ tor. Information on the tyre pressure monitor (Y page 166). Switching ambient lighting on/off X Select Settings > Ambient lighting > On. Setting the brightness of the ambient lighting X Select Settings > Ambient lighting > Brightness. X Set the value. Setting the language X Select Settings > Language (Language). X Set the value. 114 Setting values

Operating the on-board computer.

Operating and setting the smart

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 123 · Applies to: 453

Audio-System

smart Audio-System overview

G WARNING

If you operate information and communi-

cation equipment integrated in the vehi-

cle when driving, you could be distracted

from the traffic situation. This could also

cause you to lose control of the vehicle.

There is a risk of an accident.

Only operate this equipment when the

traffic situation permits. If you cannot be

sure of this, stop the vehicle paying

attention to road and traffic conditions

and operate the equipment with the vehi-

cle stationary.

You must observe the legal requirements

for the country in which you are currently

driving when operating the smart Audio-

System.

Number keys 1 - 6 ; C Previous station or track = USB1 connection ? D Next station or track A % Goes back one menu level higher B Control for menu selection and station list, 9 button C USB2 port D Ã Telephone menu to accept or reject calls E ª System settings F 8 Mute G Õ Plays back media from external data storage media H $ Switches on the radio and selects the waveband I External audio equipment (AUX connec- tion) J Volume control, Ü button K F Sets the radio text Operating and setting the smart Audio-System X To switch on or off: press Ü. X To scroll through menus: turn control B. X To select menu options: turn control B and press the 9 button. X To navigate to the next-highest folder: press the % button. X To set values: turn control B and press the 9 button. X To increase or decrease the volume: turn control J. Using external devices Useful information You can connect the following external devices: RUSB devices, iPods® and MP3 players (USB port) RExternal audio equipment (AUX connec- tion) RBluetooth® devices, such as mobile phones External devices can be charged at USB ports = and C when the ignition is switched on. It is better to use USB port = for charging as it supplies a higher charge current. To charge an external device remove the cover on USB port =. Operating and setting the smart Audio-System 115

Using the smart Audio-System. Z

Removing and fastening the cover of

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 124 · Applies to: 453

the USB1 port X To remove: turn the cover anti-clockwise using handle :. X Move the cover into position ;. X Remove the cover. X To secure: place the cover in position ;. X Turn the cover clockwise using han- dle :. Adjusting the system settings Setting the system language X Press the ª button. X Select Language. The list of languages appears. X Select the language. Switching the time on/off X Press the ª button. X Select Clock. X Select ON or OFF. Setting the time X Press the ª button. X Select Clock. X Select Set Time. X Set the time. Setting the time format X Press the ª button. X Select Clock. X Select Format. Select one of the following time formats: RAm/Pm R24hr Adjusting the audio settings Adjusting the sound X Press the ª button. X Select Audio. X Select Sound. Select the desired sound setting: RBass: adjusts the bass. RTreble: adjusts the treble. RBal.: adjusts the surround sound (bal- ance) to left or right. RFade: adjusts the surround sound to the front or back. Switching the bass boost on/off (vehi- cles without JBL sound system) X Press the ª button. X Select Audio. X Select Bass Boost. X Select ON or OFF. Resetting audio settings X Press the ª button. X Select Audio. X Select Audio Default. X Select Yes. Adjusting the volume to the vehicle speed (vehicles without JBL sound sys- tem) X Press the ª button. X Select Audio. 116 Operating and setting the smart Audio-System

Using the smart Audio-System.

X Select Speed Vol..

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 125 · Applies to: 453

X Select the desired level. The higher the level, the higher the vol- ume will be at increasing road speeds. Listening to the radio Switching on the radio X Press the Ü button. X Press the $ button. The smart Audio-System receives data transmitted via the Radio Data System (RDS). Setting the waveband X Press the $ button repeatedly until the desired waveband appears. If available, you can switch between the following wavebands: RFM1 RFM2 RDR1 (digital radio) RDR2 (digital radio) RAM Selecting stations manually FM and AM waveband X Press the D or C button to set the desired frequency. Digital radio frequency range X To select the desired station, press the D or C button. Setting a station from the station list X Press a in radio mode. The station list appears. X Select a station. X Press a to confirm. Updating the station list X Press the $ button until you hear a tone. Storing a station X Select the waveband. X Set the station. X Press a number key 1 to 6 until you hear a tone. The station set for this waveband will be stored on the button you have pressed. Selecting a stored station X Select a waveband. X Press a number key for the stored station. Switching traffic announcements on/off X Press the ª button. X Select Radio. X Select TA. X Select ON or OFF. Interrupting a traffic announcement X During a traffic announcement, briefly press %. Displaying radio text in FM radio X Press the F button. If radio text is available, it will be dis- played. Digital radio (if available) Information on DAB i Any electronic devices taken into the vehicle may seriously impair radio and DAB radio reception. Listening to the radio 117

Using the smart Audio-System. Z

Digital radio or DAB (Digital Audio Broad-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 126 · Applies to: 453

casting) is a digital transmission standard optimally designed for the mobile reception of radio transmissions. Several programmes are combined into so-called ensembles and transmitted on a single frequency. Some stations only transmit programmes at cer- tain times. If you have selected a pro- gramme that has subsequently been removed from the ensemble, it will no lon- ger be received. You will continue to receive the other programmes in the ensemble. Select either a different pro- gramme or a different ensemble. i DAB cannot be received everywhere in Europe. Displaying radio text This function provides additional data transmitted in the DAB waveband (DR1 and DR2). Besides displaying the artist and track names, information on the current programme may also be available. X Press the F button. X Select Radio text. The î dot shows that radio text is acti- vated. Setting alerts If this function is activated, certain pro- gramme categories allow another broadcast to interrupt the current audio playback. Numerous categories can be selected, such as news, business news, sports news etc. A prerequisite for the reception is that broadcasters process the relevant informa- tion. This function is only available in cer- tain countries. X Call up the setup menu (Y page 116). X Select Radio > DR Interrupt… > Desired category. The î dot shows the active settings. i Several categories can be selected. Repeat the procedure if necessary. Displaying the EPG EPG (Electronic Program Guide) is available in the DAB waveband (DR1 and DR2). If the station supports EPG, you can use the EPG (Electronic Programme Guide) to dis- play the current and the following two radio programmes. At the very least, the programme overview contains the name, time and length of each programme. X Press the F button. X Select EPG. X Select the desired station. Switching on Intellitext™ If the station supports Intellitext™, you can have additional information displayed, such as news, headlines, business news, sports news etc. A prerequisite for the reception is that broadcasters process the relevant information. Intellitext™ is only available in certain countries. X Press the F button. X Select Intellitext. Using a mobile phone Connecting a mobile phone Useful information The Bluetooth®-capable mobile phone must be compatible with the smart Audio-Sys- tem. Overview of compatible mobile phones: http://www.smart.com/connect. To make a call, Bluetooth® must be activa- ted on the mobile phone and the smart Audio-System. Once outside the Bluetooth® reception range, the connection is terminated auto- matically. To clearly identify a mobile phone, change the device name (see the manufacturer's operating instructions). Activating Bluetooth® on a mobile phone X Activate Bluetooth® on the mobile phone (see the manufacturer's operating instructions). X Search for devices. 118 Using a mobile phone

Using the smart Audio-System.

Switching on the Bluetooth® function of

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 127 · Applies to: 453

the smart Audio-System X Press the à button. X Turn control B to Bluetooth and confirm with 9. X Turn control B to ON and confirm with 9. The î dot shows the active setting. Authorising a mobile phone on the smart Audio-System X Press the à button. X Select Scan devices. The system searches for available mobile phones and displays them in a list. X Select a mobile phone confirm with 9. X Authorise the mobile phone with the smart Audio-System. The following options are available: Rif a code appears in the smart Audio-Sys- tem display and on the mobile phone, confirm it on the mobile phone Rif the code 0000 appears in the smart Audio-System display, enter it and con- firm it on the mobile phone A maximum of five mobile phones can be authorised. However, only one authorised mobile phone can be connected with Blue- tooth® at a time. Loading and updating the phone book X Press the à button. X Select Settings > PB download. X If necessary, accept the access confirma- tion on the mobile phone. If the mobile phone supports the Bluetooth® PBAP (Phone Book Access Profile) profile, the phone book and call lists will be trans- ferred after you connect. Removing a mobile phone from the list (de-authorising) X Press the à button. X Select Del. device. Authorised mobile phones are displayed. X Select the mobile phone to be deleted. X Select Yes. After de-authorisation, the Bluetooth® con- nection to the mobile phone is no longer established automatically. Connecting another authorised mobile phone X Activating Bluetooth® on a mobile phone X Press the à button. X Select Sel. device. All authorised mobile phones are dis- played. The currently connected mobile phone is indicated by a dot. X Select the desired mobile phone from the list. Setting the sound Adjusting the call volume X Press the à button. X Select Settings > Volume > Call. X Select the value. Switching the smart Audio-System ringtone on and off X Press the à button. X Select Settings > Ringtone. X To switch on: select Car. X To switch off: select Phone. Adjusting the ringtone volume X Press the à button. X Select Settings > Volume > Ring. X Select the value. Telephone operation Calling a contact from the phone book To call a contact in the phone book, the mobile phone telephone book first has to be imported into the smart Audio-System. Using a mobile phone 119

Using the smart Audio-System. Z

X Press the à button.

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 128 · Applies to: 453

X Select Phonebook. X Select the contact. The details for the contact are displayed. X Select the desired phone number. X Press the 9 button. Dialling a phone number X Press the à button. X Select Dial a number. An input screen appears. X Enter the number. X Press the 9 button. X Select ;. Using call lists to call contacts To call a contact in a call list, the mobile phone telephone book first has to be impor- ted into the smart Audio-System. X Press the à button. X Select Call List. X Select Dialled, Received or Missed. X Select an entry from the list. Calling the last number dialled X Press and hold the à button until the call is established. Accepting a call X Press the à button. or X Briefly press the button on the steering wheel. Rejecting a call X Press and hold the à button. or X Press and hold the button on the steering wheel until the call is rejected. Holding and continuing a call X To hold: select Â. X To continue the call: press the 9 button. Transferring a call to the mobile phone X Select z. X To transfer the call back to the smart Audio-System: press the 9 button. Entering numbers or characters during a call X Select #123. X Enter numbers or characters. Ending a call X Press the 9 button. or X Press the button on the steering wheel. Using voice control for the mobile phone Useful information The voice control of the connected mobile phone can be used (see manufacturer's operating instructions). Not all voice con- trol services are supported by the smart Audio-System. Voice control must be activated in the set- tings menu of the mobile phone. Starting voice control of the mobile phone X Connect the mobile phone with the smart Audio-System via Bluetooth®. X Press the button on the steering wheel. A message appears in the display of the smart Audio-System and a tone sounds. Voice control for the mobile phone is active. X Say a command. 120 Using a mobile phone

Using the smart Audio-System.

Ending voice control of the mobile

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 129 · Applies to: 453

phone X Press the button on the steering wheel. or X Press the 9 button. Voice control of the mobile phone is ended. Operating external data storage media Useful information You can switch between the following media sources, depending on the type of external data storage media connected: RUSB 1 or iPod® 1 RUSB 2 or iPod® 2 RAUX (external audio equipment) RBT Audio (with Bluetooth® connected device, such as a mobile phone) Selecting external data storage media X Press the Õ button repeatedly until the desired media source appears in the display. Operating a USB device or iPod® Connecting a device X Connect the device to the USB port. The device is activated automatically and the first track is played. Selecting a track X In USB mode, press the 9 button. Available tracks or folders are displayed. X Turn control B. X Press 9 to confirm. Rapid search X Press the 9 button. An entry field appears. X To enter characters, turn control B and press the 9 button. Skipping to the next or previous track X Press the D or C button briefly to skip to the next track or press longer for rapid scrolling. Switching random track sequence on/off X Press the C button. Switching the repeat function on/off X Press the number key. Selecting a track from a category with an iPod® connected X Press the 9 button. X Select a category from the list. Different categories, such as playlists, artists or albums, can be selected, depending on the connected device. Displaying metadata X Press the F button repeatedly until the desired metadata is displayed. Operating external audio equipment (AUX) Connecting a device X Connect the device to the AUX jack. Use the Õ button to access the media on a connected AUX device. Adjusting the volume of external audio equipment X Press the ª button. X Select Audio. X Select AUX In. Operating external data storage media 121

Using the smart Audio-System. Z

Select one of the following options for the

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 130 · Applies to: 453

volume: RLow RMedium RHigh Bluetooth® device operation Connecting a device X Connect a Bluetooth® audio device the same way you connect a mobile phone with Bluetooth®. Skipping to the next or previous track X Press the D or C button briefly to skip to the next track or press longer for rapid scrolling. Displaying metadata X Press the F button repeatedly until the desired metadata is displayed. 122 Operating external data storage media

Using the smart Audio-System.

Operating and setting up the smart

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 131 · Applies to: 453

Media-System

Operating the smart Media-System

Please note

Some functions are restricted while driving.

Controls

:

Switches voice control system on/

off, accepts and ends a phone call

; W Increases the volume

= X Reduces the volume

? smart Media-System display

Voice control system

The following functions are possible using

the voice control system of the smart

Media-System:

Renter a destination for navigation

Rmake a call

Rstart an application

Controls on the smart Media-System

Previous station or track and fast

rewind

; Mute

= Next station or track and fast forward

? Switches to the home screen

A Ü On/off button and volume control

B Touchscreen

Ports on the centre console

Port for external audio equipment (AUX) ; USB port = SD card slot Some devices, for example mobile phones or USB drives, connect with the smart Media- System via USB port ;. External devices with 5 V (1 A) can be charged on USB port ; when the ignition is switched on. Operating and setting up the smart Media-System 123

Using the smart Media-System.

Overview of home screen

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 132 · Applies to: 453

X To call up a function, tap on an area on the home page or on a symbol. The following functions can be selected: R:: to switch to radio or media applica- tion R;: to call up message memory R=: to switch to telephone application R?: to call up the weather forecast for the current location RA: to display time and temperature in full screen or to call up time settings RB: to switch to full screen navigation view RC: next navigation manoeuvre is dis- played RD: to change language, change home page, remove an SD card or switch off the display RE: distance to the destination and esti- mated time of arrival are displayed RF: to view, call up or change favourites RG: to call up the main menu RH: to switch to telephone application i The home screen can be set to display the energy flow. If the home page is set so as to display the eco score, you can switch to the eco score application by tapping on the area. When Android Auto™ or MirrorLink® is active, another symbol is displayed on the home page. You can switch to the relevant smartphone screen application by tapping on the symbol. Switching the smart Media-System on/off Switching on automatically X Start the engine. Switching off automatically X Switch off the ignition and open the door. Switching on/off manually X Press the Ü button. Restarting X Press the Ü button five times. The smart Media-System shuts down and restarts. i The restart can take several minutes. During the restart, the audio volume can- not be adjusted. Scrolling through a menu or list on the touchscreen X Touch the touchscreen with your finger. X Swipe up, down, left or right. The selection on the display will then move in the respective direction. Selecting items on the touchscreen X Tap on a menu, an option or an applica- tion with one finger. The menu, the option or the application is launched. Controlling media playback on the touchscreen X Swipe to the left. The next media item is played or dis- played, e.g. the next track or station. X Swipe to the right. Playback is restarted or the previous media item is played or displayed, e.g. the previous track. Media playback can be controlled in the following playback modes: RRadio mode RMusic and audio playback 124 Operating and setting up the smart Media-System

Using the smart Media-System.

RImage playback

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 133 · Applies to: 453

RVideo playback Calling up menus X Select Menu on the home screen. X Select one of the following submenus. Submenus: RMultimedia Radio and media playback RNavigation Navigation system RTelephone Mobile phone functions RVehicle Reversing camera, eco score, energy flow and consumption details RServices TomTom Services RSystem General system settings Confirming settings X Select Done. Settings are accepted. Switching off the display X Select home page > W > Switch off screen. Adjusting the system settings Adjusting the display Setting the daytime brightness X Select System > Display. X Move the Daytime brightness control to the left or right. Setting the night-time brightness X Select System > Display. X Move the Nighttime brightness control to the left or right. Activating automatic switching between day and night mode X Select System > Display > Automatic day/night mode. Displaying day mode constantly X Select System > Display. X Remove the tick for Automatic day/ night mode and Force night mode. Displaying night mode constantly X Select System > Display > Force night mode. Setting the system language X Select System > Language. A list of available languages is displayed. X Select the desired language. i The language of the spoken navigation announcement can be selected independ- ently of the system language. Changing the on-screen keyboard X Select System > Keyboards. X Select the keyboard layout. The following keyboard layouts can be selected: RLatin RGreek RCyrillic For the Latin keyboard layout, it is possi- ble to choose between the ABCD, QWERTY, AZERTY and QWERTZ layouts. Selecting the home screen display Different displays are available for the home page which display up-to-date infor- mation about the applications in the smart Media-System. X Select System > Home page. A selection of home screen displays appears. X Select the desired display. Operating and setting up the smart Media-System 125

Using the smart Media-System.

Resetting to factory settings

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 134 · Applies to: 453

X Select System > Restore factory set‐ tings. X Confirm with Yes. All settings changed in the system return to the default values. All destinations, routes and favourites will be deleted. Setting the time manually X Select System > Clock > Set time. X Change the minutes and hours of the time shown. Activating automatic time adjustment X Select System > Clock > Set time > Auto‐ matic time adjustment. Setting the time format X Select System > Clock > Time format. X Select the time format. The following time formats can be selec- ted: R18:00 R6:00 PM R6:00 Displaying status and information X Select System > Status & Information. X Select the information. The following information can be selec- ted: RVersion information Software and hardware of the Media- System RGPS status Current GPS signal strength RNetwork status Signal strength of the data connection RLicences For free and open-source software used RCopyright For text in the TomTom software used. Adjusting the audio settings Setting the volume X Select System > Sound > Sound levels. X Select the volume setting. The following volume settings can be selected: RMain volume For the whole system RHands-free For the hands-free system RRingtone Ring tone volume RNavigation Volume for the whole navigation sys- tem RComputer voice Volume of the computer-generated voice RApp events Volume of events triggered by apps X Set the desired volume. Adjusting the volume to the vehicle speed (vehicles without JBL sound sys- tem) The speed-dependent volume adjustment function adapts the volume to the current vehicle speed. X Select System > Sound > Speed sensitiv‐ ity volume. X Move the Speed sensitivity volume control to the left or right. The higher the value, the more the vol- ume increases with the speed of the vehi- cle. Volume adjustment is not set using the control but automatically. Adjusting surround sound (balance) X Select Multimedia > Settings > Sound > Balance > Manual. X Move the control to the desired position. X Fade: adjusts the surround sound (bal- ance) to the front or back. X Confirm with Done. 126 Operating and setting up the smart Media-System

Using the smart Media-System.

Adjusting the bass and treble

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 135 · Applies to: 453

X Select Multimedia > Settings > Sound >

Bass/Treble > Manual.

X Use the control to adjust the bass and

treble separately.

Setting a neutral sound for the bass and

treble

X Select Multimedia > Settings > Sound >

Bass/Treble > Neutral.

Audio is played without increasing the

bass or treble.

Activating/deactivating arkamys® bass

boost (vehicles without JBL sound sys-

tem)

The arkamys® bass boost setting emphasi-

ses the bass during playback.

X Select Multimedia > Settings > Bass

boost Arkamys.

Manual activation of arkamys® bass boost

on models with a JBL sound system is not

possible. Activation functions automati-

cally.

Setting the volume for warning tones

X Select System > Sound > Alerts.

X Move the control to the left or right.

Enabling warning tones when the dis-

play is switched off

X Select System > Sound > Alerts > Keep

audio alerts when screen turned off.

Creating and deleting favourites

Creating favourites

Preset ; Navigation = Radio ? Telephone A Services B Context menu Frequently used settings such as phone contacts and radio stations can be stored as favourites. Six favourites can be stored for each of the following categories: RNavigation RRadio RTelephone RServices X Select Favourites on the home screen. X Select a category. X Select the next empty memory position. A list of possible favourites appears. X Select favourites. Deleting favourites X Select Favourites on the home screen. X Select W > Remove a Favourite. X Delete a favourite. The following options can be selected: RSelect the favourite you wish to delete and confirm with Delete. RTo delete all favourites, select Remove all Favourites. Operating and setting up the smart Media-System 127

Using the smart Media-System.

Listening to the radio

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 136 · Applies to: 453

Switching on the radio

X Select Multimedia > Radio.

Display modes

Useful information

In radio mode there are three different dis-

play modes, in which various settings can

be made:

R"List" display mode (FM and digital radio)

R"Frequency" display mode (AM and FM

radio)

R"Presets" display mode

"List" display mode (FM and digital

radio)

Selects the waveband (AM/FM/DAB

radio) and preset group (FM/DAB)

; Selects the previous station

= Selects the next station

? Context menu

A "Frequency" display mode

B "List" display mode

C "Presets" display mode

D Station currently playing

"Frequency" display mode (AM and FM

radio)

Selects the waveband (AM/FM radio) and

preset group (FM)

; Increases or decreases the frequency in

small increments

= Station search, forwards or backwards

? Context menu

A Adjusts the frequency manually

B Station currently playing

"Presets" display mode

Selects the waveband (AM/FM/DAB radio) and preset group (FM/DAB) ; Stored station = Context menu ? Station currently playing Selecting a station "List" display mode X Swipe up or down in the station list. X Tap on the desired station. 128 Listening to the radio

Using the smart Media-System.

"Frequency" display mode (AM and FM

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 137 · Applies to: 453

radio) X Slide control on the waveband left or right. Starting a station search X Select C or D in the "Frequency" display mode. Storing a station X Set the station. X Select W > Save as preset. Up to six stations can be stored for each waveband. Displaying radio text Radio text contains information such as current track or latest news. X Select W > Show radio text. Displaying digital radio services X Select W > DR services. X Select one of the following digital radio services: Digital radio services: REPG Programme schedule for the station currently playing RIntellitext Programme information and pro- gramme schedule for the station cur- rently playing RSlide show Displays images to accompany the cur- rent broadcast Other radio settings Searching for alternative frequencies with the best possible reception quality X Select Multimedia > Settings > Radio > AF (Alternative frequency). Receiving traffic reports (i-Traffic) X Select Multimedia > Settings > Radio > i- Traffic (Traffic program). Displaying the programme type (e.g. classical) X Select Multimedia > Settings > Radio > PTY (Program type). Switching to the corresponding FM sta- tion when digital radio reception is poor X Select Multimedia > Settings > Radio > Simulcast. Displaying information on certain cate- gories (i-Announcement, digital radio only) X Select Multimedia > Settings > Radio > i- Announcement. X Select an i-Announcements category. Updating the station list X Select Multimedia > Settings > Radio > Update radio list. Displaying energy consumption Calling up the energy flow display X Select Menu > Vehicle > Energy consump‐ tion > Energy flow. The Energy flow display shows the flow of energy in the vehicle. Displaying energy consumption 129

Using the smart Media-System.

The colour of the energy flow indicates the

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 138 · Applies to: 453

following: RGreen colouring: energy is being recu- perated ROrange colouring: the drive is consuming energy RYellow colouring and an illustration of the consumers: electrical consumers are consuming energy RGrey colouring: no energy is being recu- perated or consumed Calling up the detailed consumption display X Select Menu > Vehicle > Energy consump‐ tion > Consumption details. The Consumption details display shows the energy consumption of the drive and electrical consumers as well as the energy recuperated over the previous 15 minutes. The display also shows the total consump- tion of the drive and electrical consumers as well as the total amount of energy recu- perated during the current journey. The Consumption details display is reset each time the engine is switched on. Using a mobile phone Connecting a mobile phone Please note G WARNING The electromagnetic radiation from two- way radios can interfere with the vehicle electronics if they are manipulated or retrofitted incorrectly. This could jeop- ardise the operating safety of the vehicle. There is a risk of an accident. You should have all work on electrical and electronic components carried out at a qualified specialist workshop. G WARNING If you operate two-way radios incorrectly in the vehicle, their electromagnetic radiation can interfere with the vehicle electronics, for example if: Rthe two-way radio is not connected to an exterior aerial Rthe exterior aerial is not correctly mounted or is not low-reflection This could jeopardise the operating safety of the vehicle. There is a risk of an accident. Have the low-reflection exterior aerial fitted at a qualified specialist workshop. When operating two-way radios in the vehicle, always connect them to the low- reflection exterior aerial. Bluetooth® must be enabled both on the mobile phone and on the smart Media-Sys- tem. Enabling and disabling Bluetooth® The mobile phone must be compatible with the smart Media-System. Overview of compatible mobile phones: http://www.smart.com/connect. X Select Settings > Turn Bluetooth on. The setting is marked. Bluetooth® is ena- bled or disabled on the smart Media-Sys- tem. Authorising a mobile phone Authorising a mobile phone for the first time Bluetooth® must be enabled on the smart Media-System. X Select Phone menu. X Confirm the display message with Yes. X Enter the security code on the mobile phone or accept access confirmation (see manufacturer's operating instructions). The Enabling Bluetooth message appears. 130 Using a mobile phone

Using the smart Media-System.

Authorising another mobile phone

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 139 · Applies to: 453

Bluetooth® must be enabled on the smart Media-System. X Select Settings > Manage devices. The list of visible mobile phones appears. X Select the mobile phone from the list. X Enter the security code on the mobile phone or accept access confirmation (see manufacturer's operating instructions). The Bluetooth® connection is established. The Bluetooth® connection will be estab- lished automatically in future. Downloading telephone data automati- cally X Select Settings > Automatically down‐ load phone data. X If necessary, accept the access confirma- tion on the mobile phone. During connection, up to 1,000 contacts are automatically transferred to the smart Media-System. Connecting another authorised mobile phone X Select Settings > Manage devices. X Select the mobile phone. The current Bluetooth® connection is ter- minated. The desired mobile phone is connected to the smart Media-System instead. Removing a mobile phone from the list X Select Settings > Manage devices. X Select W > Delete device(s). X Select the mobile phone. X Select Delete. Terminating a Bluetooth® connection X Select Settings > Manage devices. X Select W > Disconnect all devices. X Select the mobile phone. If the mobile phone leaves the Bluetooth® receiver range, the connection is automati- cally terminated. Telephone operation Useful information The following conditions must be fulfilled in order to make a 999 or 112 emergency call: Ra valid and operational SIM card is inser- ted in the mobile phone Ra mobile phone network is available Calling a contact from the phone book X Select Phonebook. X Select the contact. X Select the contact's telephone number. If the phone book contains multiple con- tacts, they can be called up using Find. Dialling a phone number X Select Dial a number. X Enter a number on the keypad. X Select Call. Calling a contact from the call log X Select Call logs. X Select an entry from the list. The call log can be sorted according to calls made, calls received and missed calls using the corresponding receiver icon. Accepting and rejecting an incoming call If a call is incoming, the following informa- tion will appear on the display: Rname of caller, if already in the phone book Rnumber of caller, if name of caller is not already in the phone book RPrivate number, if the caller has the "Hide caller ID" function switched on X To accept the call, select Pick up. X To reject the call, select Refuse. The call will be forwarded to voicemail. Using a mobile phone 131

Using the smart Media-System. Z

Holding and continuing a call

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 140 · Applies to: 453

X Select W > Put on hold. X To continue the call, select Resume. Transferring a call to the mobile phone X Select W > Handset. Ending a call X Select End call. Using the smartphone screen applica- tion Selecting settings for the smartphone screen Selecting the preferred smartphone screen application If mobile phones support Android Auto™ as well as MirrorLink®, the preferred applica- tion can be selected when a mobile phone is connected. X Select System > Smartphone Screen > Smartphone Screen application pref‐ erence. X Select Android Auto™ or MirrorLink®. Selecting settings to start Android Auto™ and MirrorLink® X Select System > Smartphone Screen > Android Auto™ Settings. or X Select System > Smartphone Screen > MirrorLink™ Settings. X Start smartphone screen application Select one of the following settings: RAsk me at each launch If the smartphone has been connected with the smart Media-System, you will be asked whether the preferred smart- phone screen application should be started. RYes If the smartphone has been connected with the smart Media-System, the pre- ferred smartphone screen application will be started automatically. RNo If the smartphone has been connected with the smart Media-System, a smart- phone screen application will not be started. Using MirrorLink® Useful information MirrorLink® is a standard for the connec- tion between the smart Media-System and a mobile phone. With MirrorLink®, the con- tent of the display on your mobile phone can be displayed in the smart Media-Sys- tem. MirrorLink® is available for mobile phones with the Android™ operating system. Further information: http:// www.smart.com/connect. To use MirrorLink®, observe the following requirements: Rthe mobile phone must support Mirror- Link® version 1.1 and above Rthe mobile phone is switched on Ra MirrorLink® certified app must be installed on the mobile phone Rthe GPS connection must be activated on the mobile phone Rthe time is set on the smart Media-Sys- tem Setting up a connection X Activate MirrorLink® on your mobile phone (see the manufacturer's operating instructions). X Connect a mobile phone with a connect- ing cable to the USB socket in the centre console. X Select Yes. Apps which have been certified for Mir- rorLink® will be shown in the smart Media-System display. 132 Using a mobile phone

Using the smart Media-System.

Calling up MirrorLink® apps

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 141 · Applies to: 453

X Tap 0 on the home page of the smart Media-System. MirrorLink® starts in the smart Media- System display. X Select the desired app. The display switches to full screen mode. X To leave full screen display: press and hold the ò button on the smart Media- System until the lower bar is shown. X To leave the display: select 2. MirrorLink® audio playback If your mobile phone supports this func- tion, you can control audio playback via the buttons on the smart Media-System. X To select the previous track: press the 9 button. X To rewind: press and hold the 9 but- ton. X To select the next track: press the : button. X To fast forward: press and hold the : button. X To mute: press the 8 button. Terminating a MirrorLink® connection X Select W > Disconnect. Using Android Auto™ Useful information Android Auto™ is an application for the connection between the smart Media-Sys- tem and a mobile phone. Certain mobile phone functions and apps can be controlled via the smart Media-System with Android Auto™. Functions such as telephony, navigation and the audio playback of Android Auto™ are displayed on the home page of the smart Media-System. Android Auto™ is available for mobile phones with the Android™ operating sys- tem. Further information: http:// www.smart.com/connect. In order to use Android Auto™, the follow- ing conditions must be met: Rthe mobile phone supports Android Auto™ starting from Android™ 5.0 Rthe mobile phone is switched on Rthe mobile phone has an Internet con- nection Rthe Android Auto™ app is installed on the mobile phone Rdata sharing must be approved Transmitted vehicle data when using Android Auto™ When using Android Auto™, specific vehicle data is transmitted to the mobile phone. This makes it possible to use selected mobile phone services efficiently. The mobile phone does not have active access to vehicle data. The following system infor- mation is transmitted: Rsmart Media-System software status Rsystem ID (anonymous) This data is transmitted in order to opti- mise communication between the vehicle and mobile phone. A random vehicle code is generated for this purpose and in order to assign multiple vehicles to the mobile phone. This code is not related to the vehicle identification number (VIN) and is deleted if the smart Media-System is reset. The following driv- ing status data is transmitted: Rgear position engaged Rinstrument cluster day/night mode This data is transmitted in order to adapt the content displayed to the driving situa- tion. GPS data such as coordinates, speed and compass direction is transmitted. This data is transmitted only when navigation is active in order to improve navigation (e.g. when driving through a tunnel). Using a mobile phone 133

Using the smart Media-System. Z

Setting up a connection

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 142 · Applies to: 453

X Activate Android Auto™ on the mobile phone (see manufacturer's operating instructions). X Connect a mobile phone with a connect- ing cable to the USB socket in the centre console. X Select Yes. Android Auto™ starts in the smart Media- System display. Calling up Android Auto™ X Tap / on the home page of the smart Media-System. Android Auto™ starts in the smart Media- System display. Activating Android Auto™ voice-operated control When Android Auto™ is activated, the sys- tem can be operated with voice control. X Press and hold the button on the multifunction steering wheel for approx- imately three seconds. A tone sounds. Disconnecting Android Auto™ X Disconnect the USB connection between the mobile phone and the smart Media- System. Using voice control for the mobile phone Useful information The voice control of the connected mobile phone can be used (see manufacturer's operating instructions). Not all voice con- trol services are supported by the smart Media-System. The requirement for voice control of the mobile phone is that Android Auto™ or Mir- rorLink® are not active. Activating voice control for the mobile phone X Connect the mobile phone with the smart Media-System via Bluetooth®. X Press and hold the button on the steering wheel. The o symbol appears in the display. Voice control for the mobile phone is active. X Say a command. Further settings Setting the volume X Select Settings > Sound levels. X Set the volume of the hands-free system and the ringtone. Activating voicemail X Select Voice mail. X Enter the voicemail phone number on the keypad. X Select Done. Voicemail is activated and the voicemail number is dialled. Configuring voicemail X Select Settings > Voice mail configu‐ ration. Updating the phone book A Bluetooth® connection must be present. X Select Phone book > W > Update phone data. Updating the call log X Select Call logs > W > Update phone data. Adding a contact to favourites X Select Phone > Phonebook. X Select the contact from the list. 134 Using a mobile phone

Using the smart Media-System.

X Select W > Add to Favourites.

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 143 · Applies to: 453

X Dial a phone number.

Connecting and operating external

data storage media

Useful information

The following external data storage media

can be connected:

RUSB memory stick (USB 2.0 or 3.0 with

max. 64 GB) or iPod®

RSD or SDHC card (max. 64 GB)

RExternal audio equipment (AUX connec-

tion)

RBluetooth® devices such as mobile phones

The following formats are supported:

RMP3 files

RWMA files

RACC formats

(.AAC, .M4A, .M4B, .M4P, .M4V, .M4R

and .MP4)

ROGG Vorbis (.OGG, .OGA)

RPCM 16 bit (.WAV, .PCM)

A data storage medium may contain no

more than eight directory levels.

The smart Media-System only recognises

the first partition of a data storage medium.

The partition must be formatted as FAT or

FAT32.

Connecting external data storage

media

Connecting a USB memory stick

X Insert a USB memory stick in the port on

the centre console.

Playback starts automatically.

Connecting an SD card

X Insert an SD card into the SD card slot in

the centre console.

Playback starts automatically.

Connecting a Bluetooth® device

X Authorise and connect a Bluetooth®

device, such as a Bluetooth®-capable

mobile phone.

Operating external data storage media

Selecting connected external data stor-

age media

X Select Menu > Multimedia > Media .

X Select connected medium.

Controlling playback from a USB mem-

ory stick or SD card

Selects the previous track ; Selects the next track = Stops and continues playback ? Switches track repeat on A Switches random playback on B Calls up the context menu C Displays the playlist D Selects a new track based on categories, e.g. album, genre, folder E Resumes playback at any point in the track Connecting and operating external data storage media 135

Using the smart Media-System. Z

Controlling playback from a Bluetooth®

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 144 · Applies to: 453

device

Selects a new track ; Selects the previous track = Stops playback ? Selects the next track A Displays the playlist B Calls up the context menu Selecting a different device X Select W > Change source. Connecting another authorised Blue- tooth® device X Select W > Find new device. Enabling and disabling random play- back X To enable: select W > Enable shuffle. X To disable: select W > Disable shuf‐ fle. Displaying details of tracks on a USB memory stick or SD card X Select W > Song details. Selecting a track from current playlist X Select New selection > Folders. The current playlist is displayed. X Select Find. A keyboard is shown. X Enter the name or part of the name of the track you are looking for. Selecting a track from categories X Select New selection. X Select a category for playback. Switching album cover display on/off The album cover must be saved in the audio file. X Select Multimedia > Settings > Media > Display album cover. Viewing images Useful information Images that have been saved to an SD card or USB memory stick can be viewed in the smart Media-System. The following file formats can be displayed: R.JPG R.GIF R.PNG R.BMP Image playback Starting image playback X Insert an SD card or USB memory stick into the corresponding port. X Select Multimedia > Pictures. X Select USB or SD as the media source. X Select a folder. X Select an image. Switching between images X Swipe left or right. Specifying a new selection of images X Select New selection. 136 Viewing images

Using the smart Media-System.

Setting image playback

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 145 · Applies to: 453

Switching from normal to thumbnail view X Select Thumbnails. Switching from thumbnail to normal view X Select an image. Displaying in full screen mode X Select W > Full screen. Activating the controls in full screen mode X Tap the touchscreen. Switching from full screen mode to nor- mal view X Select W > Normal view. Enlarging the image X Select W > Zoom in. Showing images as a slide show X Select W > Slide show. Setting the display duration X Select W > Picture settings > Slide show delay. X Set the desired time using the controls. Setting default view for image playback X Select W > Image settings > Default view. X Select Normal view or Full screen. Video playback Video playback Starting video playback X Insert an SD card or connect a USB stick. X Select Multimedia > Video. X Select USB or SD. X Select a folder or video. All videos in a folder are played one after the other. i The size of the video file may have an impact on the performance of the system. Therefore, only playback videos with a length of up to five minutes. Selecting the next or previous video X Select D or C. Stopping and continuing playback X Select Ë. Playing a new video X Select New selection. X Select a new video. Setting the video view Playing videos in full screen mode X Select Full screen. Setting the default view for video play- back X Select W > Video settings. X Select Normal view or Full screen. Video playback 137

Using the smart Media-System. Z

Using TomTom Services

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 146 · Applies to: 453

Please note The smart Media-System uses a mobile phone connection for data connection. Please take note of the following informa- tion when using data services: RThe mobile connectivity and built-in SIM card for this vehicle can only be used for certain data services. These are offered by certain third parties as well as Daimler AG. Usage occurs via the smart Media-System in the vehicle. The use of data services requires the conclusion of separate agreements between the vehicle user and the respective provider. Voice service usage is not permitted. As such, the SIM card must be permanently installed in the condition in which it was delivered. RThe mobile communications connectivity and the SIM card may only be used responsibly in accordance with the applicable laws and other legal require- ments of the corresponding countries. Provided that this is within the power of the vehicle user. RUpgrading, reproduction, reverse assem- bly and disassembly of the SIM card are not permitted. Statutory authority remains unaffected. Failure to follow the above instructions can, in some cases, lead to temporary or perma- nent deactivation of the mobile connection and the SIM card. This depends on the severity of non-observance. The measure described here contributes in particular to the protection of Daimler AG and its con- tractual partners from negative legal con- sequences due to non-observance. The availability of mobile connectivity in indi- vidual countries depends on the existence of corresponding mobile service agree- ments with local mobile network providers. Availability can therefore change from time to time. The maximum period of validity for the mobile connectivity is 15 years from the time of installation in the vehicle. Useful information In the TomTom Services menu, traffic infor- mation and other TomTom Services can be called up and managed. TomTom Live Services are available for a subscription fee. The following TomTom Services come pre-installed and, following activation, can be used free of charge for a period of three years: RHD Traffic RRadar cameras (not available in all coun- tries) RWeather RTomTom Places More information on services http:// www.tomtom.com/services. More information on availability in specific countries: http://www.smart.com/connect TomTom Services can also be called up and managed in the Services menu. In the main menu, select Services > TomTom Services. i If you have subscribed to the "TomTom Traffic" service and this is available, the "Traffic info" menu will be called "Tom- Tom Traffic". Activating TomTom Services TomTom Services must be activated in the smart Media-System before using them for the first time. If TomTom Services are not yet activated, a corresponding button will be displayed in the main menu and in the Services menu. To activate TomTom Services for the first time, observe the following requirements: Ran SD card with map data is inserted into the SD card slot Ra valid vehicle position is available on the map Ra mobile phone network is available X Select Services > Activate My Services. X Confirm the display messages with Yes. After a short while, TomTom Services are available. 138 Using TomTom Services

Using the smart Media-System.

X Select Services > TomTom Services.

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 147 · Applies to: 453

The TomTom Services installed on the device are displayed. X Select the desired TomTom service. A display message appears. TomTom Services are activated. Starting TomTom Services X Select Navigation > TomTom Services. Checking subscription status for Tom- Tom Services The services available on the device and their subscription status may be checked at any time. X Select Services > TomTom Services > My services. The services available on the device and their subscription status will be shown. Subscription to a service can be extended via http://www.tomtom.com, subject to a fee. This requires registration at http:// www.tomtom.com/forsmart. X Remove the SD card from the vehicle and insert it into a computer. Further information: http:// www.tomtom.com/forsmart. Downloading updates and POIs If available, map and software updates as well as points of interest may be downloa- ded via http://www.tomtom.com. This requires registration at http:// www.tomtom.com/forsmart. X Remove the SD card from the vehicle and insert it into a computer. Further information: http:// www.tomtom.com/forsmart. Calling up the applications manager Information on smartphone screen applica- tions and smartphone voice-operated con- trol can be called up with the applications manager. X Select Services > Settings > Applica‐ tions manager. Calling up the connectivity manager The connectivity manager allows you to manage the devices connected to the smart Media-System. X Select Services > Settings > Connectiv‐ ity manager. Managing data sharing Please note If data sharing is approved, smartphone screen applications, for example Android Auto™, smartphone voice-operated control and the online charging station search are activated alongside TomTom Services. Enabling or disabling data sharing If data sharing has not been enabled beforehand, a corresponding message is shown when the smart Media-System is started up. Data sharing can be enabled or disabled at any time. X Select Services > Settings > Data shar‐ ing. X Select the setting. The following settings can be selected: RYes Enable data sharing RNo Disable data sharing. Displaying additional information X Select Services > Settings > Data shar‐ ing > About. Displaying text in another language X Select Services > Settings > Data shar‐ ing > Language. Using TomTom Services 139

Using the smart Media-System. Z

Using the navigation system

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 148 · Applies to: 453

Starting the navigation system Please note G WARNING If you operate information and communi- cation equipment integrated in the vehi- cle when driving, you could be distracted from the traffic situation. This could also cause you to lose control of the vehicle. There is a risk of an accident. Only operate this equipment when the traffic situation permits. If you cannot be sure of this, stop the vehicle paying attention to road and traffic conditions and operate the equipment with the vehi- cle stationary. The navigation system does not provide information on stop signs, right of way signs, traffic regulations or road safety regulations. The traffic regulations always take prece- dence over navigation announcements. Observe the legal stipulations and traffic regulations of the country you are driving in when in navigation mode. Selecting the navigation system X Select Menu > Navigation. The following navigation settings can be selected: Rsearching for a destination Rplanning a route Rdisplaying a map Rcalling up TomTom Services Rchanging navigation settings Installing map data G WARNING SD cards are small parts. They can be swallowed and cause choking. This poses an increased risk of injury or even fatal injury. Keep the SD card out of the reach of chil- dren. If a SD card is swallowed, seek med- ical attention immediately. ! To prevent damaging data, only use the supplied SD card for Media-System data or to update map and system files. X Insert an SD card into the SD card slot in the centre console. X Switch on the device. The map data is read by the navigation system. Removing an SD card X Select Menu > System > Remove SD card. X Confirm the display message with Yes. X Press the SD card. X Remove the SD card from the slot. Updating map data Regular updates will be offered for the map data. The first update can be downloaded for free in the web portal within 90 days of vehicle activation. This requires registra- tion at http://tomtom.com/forsmart. Further information is available from any smart Centre. X Remove the SD card from the vehicle and insert it into a computer. X Install update software on the computer. X Run the map update assistant. i As well as updates, the latest software for the Media-System can be downloaded and Premium Voices by TomTom can be purchased. Entering and managing destinations Entering a destination by address X When using the navigation system for the first time, enter the country. X Select Navigation > Drive to... > Address. X If desired, change the country using the flag symbol. X Enter the town or postcode. 140 Using the navigation system

Using the smart Media-System.

X Select the destination from the list.

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 149 · Applies to: 453

X Select the street. X Select the house number. X Confirm with Done. Searching for a car park near the desti- nation address This function can be called up when enter- ing the destination. X Select W > Nearby car park. A list of car parks near the current desti- nation appears. Displaying information about the desti- nation address This function can be called up when enter- ing the destination. X Select W > Show info. Entering a destination using the map A location on the map can be selected as the destination. X Select Navigation > Drive to... > Point on map. X Align the map view with the destination. X Tap the destination point on the display. The symbol selected is highlighted in blue. X Tap on the symbol to confirm. Entering a destination using the voice control system X Press the button on the multifunc- tion steering wheel. A tone sounds. X Say the command "Enter address". X When prompted by the voice control sys- tem, say the destination address, includ- ing street name, house number and city. X Say the voice command "Yes" or, if sev- eral possible destinations are displayed, say the number. Selecting a destination from the list of previous destinations X Select Navigation > Drive to... > Recent destinations. X Select the destination. Entering a destination using geo-coor- dinates X Select Navigation > Drive to... > Lati‐ tude Longitude. X Enter the longitude and latitude. Setting a home location X Select Navigation > Settings > Set home location. X Enter a home address. Setting home as a destination X Select Navigation > Drive to... > Home. Selecting a saved location as a destina- tion At least one destination must be stored for this function. X Select Navigation > Drive to... > Saved locations. X Select the destination. Managing saved locations X Select Navigation > Settings > Manage saved locations. Entering a charging station as a desti- nation X Select Navigation > Drive to... > Charging stations. The following search settings for charging stations can be selected: RNear my location RAlong route RNear destination RNear Home RIn city Using the navigation system 141

Using the smart Media-System. Z

X Select the location for the charging sta-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 150 · Applies to: 453

tion search. A list of the corresponding charging sta- tions appears. An automatic check is per- formed to determine whether a charging station is free. The check may take sev- eral minutes. When the check is finished, a message appears. If a charging station is free, it will be marked green. If no charging station is free, or no informa- tion is available, the charging station is marked grey. Charging stations from the map data which cannot be checked are not marked. A maximum of 24 charging stations can be checked. i Five minutes after the check, the mark- ing automatically changes from green to grey. X Select a charging station. Entering a point of interest POIs such as museums, restaurants or car parks near a location are displayed on the map. X Select Navigation > Drive to... > Point of interest. The following POI settings can be selected to select surrounding areas: RNear my location RAlong route RNear destination RNear Home RIn city X Select the surrounding area in which to search for a POI. The following category settings for POIs can be selected: Rlist of categories for POIs: e.g. charging station or restaurant RPOI name search RPOI search within a category X Select the category for the search. X Select a POI. i If the charging station category is selected, only charging stations from the map data are searched. Managing POIs Adding a POI category X Select Navigation > Settings > Manage POIs > Add POI category. X Enter the name and symbol for the new POI category. Deleting a POI category X Delete Navigation > Settings > Manage POIs > Delete POI category. X Select the category to be deleted. Adding POIs X Select Navigation > Settings > Manage POIs > Add POI. If no POI categories have been defined yet, a prompt appears to enter a POI cate- gory. X Select the category for the POI. X Enter your POI. Having POIs displayed on map This function enables the display of per- sonalised POIs on the map. X Select Navigation > Settings > Show POI on map. Deleting POIs X Select Navigation > Settings > Manage POIs > Delete POI. X Select a POI category. X Select the POI to be deleted. Editing POIs X Select Navigation > Settings > Manage POIs > Edit POI. X Select a POI category. X Customise the POI properties. Setting alerts for a nearby POI X Select Navigation > Settings > Manage POIs > Warning when near POI. X Select a POI category. X Set the distance at which the message should appear. X Set the type of alert issued. 142 Using the navigation system

Using the smart Media-System.

Entering a destination via the TomTom

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 151 · Applies to: 453

LIVE service "TomTom Places" POIs from the "TomTom Places" online data- base are available using the "TomTom Pla- ces" function. X Select Navigation > Drive to... > Tom‐ Tom Places. A list of search criteria appears which can be used to search for a POI. X Select the search criterion. X Enter a search term. If a large number of search results are available, 20 additional search results can be downloaded. Changing the route Useful information Once the destination has been selected, the navigation system calculates the route to the destination. The following options are available for adjusting route guidance: Rcalculate alternative routes Radjust routes calculated by the naviga- tion system Rplan routes in advance and travel via specific way points Radjust settings for calculating routes Once the route is calculated, a route sum- mary is shown. By default, the quickest route will be calculated for route planning, taking into account IQ Routes™. Traffic information is taken into account when cal- culating the route. Depending on the remaining range, sec- tions of the route receive the following col- ours: Rgreen: remaining range is expected to be sufficient for the route. Rorange: this route may or may not be able to be completed depending on the driving style and the influence of external fac- tors. Rred: remaining range is not expected to be sufficient for the route. The "route overview" function allows you to set whether the summary of a calculated route is automatically faded out from the display after ten seconds. If the route is not confirmed with Done, the view switches after approximately ten sec- onds automatically to the map view. Displaying a planned route Calculating the route X Enter a destination. X Select Done. The route is displayed. If the remaining range is not expected to be sufficient to reach the destination, a prompt will appear asking whether a charging sta- tion should be added to the route. Displaying the route details X Select W > Route details. The following settings can be selected: RShow instructions An overview of the route with directions appears. RShow map of route The route appears on a map. RShow destination The destination for the route appears. By pressing W, it is possible to search for a car park near the destination or add the location to the saved locations. RShow traffic on route Traffic disruptions along the route are shown. RSummary A summary of the route details appears. Saving a planned route X Select W > Save Itinerary . Changing the route Cancelling the route X Select Navigation > Change route > Can‐ cel route. When a new destination is entered, route guidance can be resumed again. Using the navigation system 143

Using the smart Media-System. Z

Calculating an alternative route

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 152 · Applies to: 453

X Select Navigation > Change route > Cal‐ culate alternative. A new route is calculated and displayed that takes you on different roads. X Select the alternative route or a previous one. Route guidance via way point The route can be adjusted by entering up to four way points. X Select Navigation > Change route > Travel via. If a way point has already been entered, a list of the saved way points will be dis- played. X Select Add. X Select a new way point from Address, Recent destinations, Saved locations, TomTom Places or Point of interest. The new way point is added. Avoiding road blocks The route can be changed if a section of road along the route is blocked or there is a traffic jam. X Select Navigation > Change route > Avoid roadblock. X Select the length of the route that needs to be avoided. Avoiding specific roads The route is calculated to avoid specific roads. X Select Navigation > Change route > Avoid part of route. A list of the roads on the route is dis- played. X Select the road that you wish to avoid. Taking traffic disruptions into account The route is recalculated based on current traffic information. Traffic information is not available in all countries and regions. X Select Navigation > Change route > Min‐ imise delays. An overview of the traffic disruptions along the route will be shown. X Select the traffic disruption you wish to avoid. Planning a route in advance Adding a route X Select Navigation > Itineraries. X Select Add. X Select the starting point of the route. X Enter the route destination. X Enter at least one way point for the route. X Enter the route name. X Confirm with Done. Starting navigation using a saved route X Select Navigation > Itineraries. X Select the desired route. X Select W > Start. Setting route planning Selecting route types X Select Navigation > Settings > Route planning > Route types. Select one of the following settings: RAsk for every route RAlways plan the fastest route RAlways plan eco routes RAlways avoid motorways RAlways plan the shortest route Selecting the setting for toll roads X Select Navigation > Settings > Route planning > Toll roads. Select one of the following settings: RAsk for toll roads on route RAlways avoid toll roads RDo not avoid toll roads 144 Using the navigation system

Using the smart Media-System.

Selecting the setting for ferry connections

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 153 · Applies to: 453

X Select Navigation > Settings > Route planning > Ferry connections. Select one of the following settings: RAsk for ferries on my route RAlways avoid ferries RDo not avoid ferries i Route planning treats the Eurotunnel as a ferry connection. Selecting the setting for unpaved roads X Select Navigation > Settings > Route planning > Unpaved roads. Select one of the following settings: RAsk for unpaved roads on my route RAlways avoid unpaved roads Selecting the setting for carpool lanes Carpool lanes are lanes which can only be used by vehicles with at least two occu- pants. X Select Navigation > Settings > Route planning > Carpool lane settings. Select one of the following settings: RAsk for carpool lanes on my route RAlways avoid carpool lanes RNever avoid carpool lanes Using information during route guid- ance Useful information Navigation announcements provide guid- ance during the journey without distract- ing you from traffic conditions. In addition, the display shows information about the route. Switching navigation announcements on/off X Tap on the area of the next navigation manoeuvre during route guidance. X Select Turn on voice guidance or Turn off voice guidance. Information such as traffic reports and warnings will be played even if the naviga- tion announcements have been deactivated. During route guidance, traffic information can be shown for the route ahead. The fol- lowing traffic information can be received: RTraffic announcements (RDS/TMC) RHD Traffic (a TomTom Live service) i HD Traffic Information takes prece- dence. Live services are not available in all coun- tries and regions. Further information: http://tomtom.com/services Tracking navigation on the display X To call up a function, tap on an area on the map display or on a symbol. X Tap directly on the map to switch to the overview map. The following functions can be selected: R:: to zoom in and out of the map view R;: maximum permissible speed is dis- played R=: name of the next main road or infor- mation about the next street sign is dis- played R?: to have traffic reports on the route displayed RA: to have the route details displayed Warning for remaining range to destina- tion appears. RB: compass display and to switch between two or three-dimensional map display RC: to open the context menu RD: next navigation manoeuvre with dis- tance is displayed and to repeat the nav- igation announcement, change the vol- Using the navigation system 145

Using the smart Media-System. Z

ume of the navigation announcement or

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 154 · Applies to: 453

switch off

RE: information about current radio or

audio equipment playback is displayed

Switch to the corresponding radio, multi-

media or telephone menu.

The navigation system zooms in on the map

view as the vehicle approaches a junction.

This makes it possible to follow turning

manoeuvres more accurately.

Shortly before navigating a motorway junc-

tion or exit, the display will show a three-

dimensional representation of the lanes

and the exit.

i Lane Keeping Assist is not available for

all junctions in all countries.

Traffic information details

Overall delay on route ; Traffic disruption (packed snow) = Traffic disruption (rain) ? Traffic disruption (traffic jam) A Current location and distance to next traffic disruption During route guidance, traffic information is shown for the route ahead. When there are a number of traffic disruptions in quick succession, only the very next disruption on the route will be displayed. Traffic information is not available in all countries and regions. Colour Meaning Grey Unknown or unexplained situa- tion Orange Slow-moving traffic Red Traffic jam Dark red Standstill or road blocked Calling up more detailed information about the traffic problems X Tap on the display for traffic information during route guidance. Scrolling through the traffic reports X Tap on the message on the touchscreen and swipe left or right. Displaying the overview map Useful information With the "View map" function, the display shows a slidable, two-dimensional over- view map. The map shows your current position, as well as a number of other ele- ments, such as favourites. Displaying a map X Select Navigation > View map. A map of the surrounding area will be shown. X To search: select W > Find. Controlling the map view Moving the map X Tap on the centre of the touchscreen. X Swipe in the desired direction. The map will then move in the respective direc- tion. Zooming in on the map X Place two fingers slightly apart in the middle of the touchscreen. X Move your fingers away from each other. Reducing the scale of the map X Place two fingers at a greater distance apart on the screen. Do not place your fingers at the very top area or very bot- tom area of the display. X Swipe your fingers towards each other. 146 Using the navigation system

Using the smart Media-System.

Displaying the reachability map

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 155 · Applies to: 453

If no route is planned, a reachability map can be displayed in order to roughly gauge the range with the current charge status. X Select Navigation > View map. X Select W > View reachability map. Showing and hiding additional informa- tion on the map X Select Navigation > View map. X Select W > Change map information. Select one of the following pieces of infor- mation: RTraffic information RNames RPoints of interest (POIs) RSatellite images RCoordinates Using TomTom Services with the nav- igation system Displaying traffic information along the route X Tap on the area of traffic information during route guidance. X Swipe left or right to switch between traffic information. Adjusting the route according to traffic disruptions X Select Navigation > TomTom Services > Traffic > Minimise delays. A faster route that had been previously rejected or route which may not have been taken into account due to the Never change my route setting for the traffic information is selected. Displaying traffic disruptions on the overview map X Select W > View map during route guidance. Traffic disruptions are displayed as sym- bols on the overview map. X To view detailed information, tap on a traffic disruption symbol. The following symbols are used: ± Traffic jam ´ Road blocked µ Traffic disruption · Construction site ¸ One or more lanes blocked ¹ Accident º Traffic disruption avoided using the traffic information ¿ Fog À Wind Á Snow  Black ice à Rain i Large area traffic disruptions such as rain, fog or snow are displayed on the overview map with several symbols. Viewing traffic information for the route to work X Select Navigation > TomTom Services > Traffic > Traffic info. for route to work. Select one of the following settings: RHome to work RWork to home RChange the home to work route Selecting the settings for traffic infor- mation X Select Navigation > TomTom Services > Traffic > Traffic info. settings. Select one of the following settings: RAlways change to this route If a faster route has been calculated due to a traffic report, the navigation system automatically changes the route. RRequest confirmation for route Using the navigation system 147

Using the smart Media-System. Z

If a faster route has been calculated due

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 156 · Applies to: 453

to a traffic report, the navigation system will ask which route should be used. RNever change my route The navigation system will not change the route, even if a traffic announcement has been made. Setting the navigation system Setting the voice The voice used for navigation messages can be changed. It is possible to choose between computer-generated voices or voi- ces recorded by professionals. For voices that have been recorded by professionals, only basic navigation messages will be spoken. X Select System > Sound > Voice. X Select the voice for playback. X To listen to the voice, select Test. Setting the voice output The read-aloud function is only available in a computer-generated voice. X Select System > Sound > Voice output settings. Select one of the following settings: RRead early warning instructions RRead aloud motorway lane instruc‐ tions RRead aloud traffic info when navi‐ gating RRead aloud foreign street names RRead aloud road numbers RRead aloud street names RRead aloud weather information RRead aloud POI warnings RRead aloud warnings RRead aloud signposts Changing the map X Select Navigation > Settings > Switch map. X Select the desired map. Changing the map colours X Select Navigation > Settings > Change map colours. X Press , or . to select the desired display. Changing the E-vehicle settings X Select Navigation > Settings > E-vehi‐ cle settings. The following functions can be called up: Rdeactivating or activating the battery warning When the charge status of the high-volt- age battery has reached 20% and the bat- tery warning is activated, a display mes- sage appears. Rshowing or hiding charging stations on the map Rmanaging charging stations Rselecting the charging cable The settings for both the type of charging and charging cable are used by the naviga- tion system to refine the selection of avail- able charging stations. During navigation, different options can be selected via the W context menu: Select one of the following options: Rsearch for type of charging Rsearch for electricity provider Rdisplay all charging stations A display message appears if there is some incompatibility between the defined set- tings and a selected charging station. Setting safety warnings X Select System > Safety warnings. Select the desired settings: RSuggest driving breaks RWarn when driving near schools RWarn when driving faster than allowed RWarn when driving faster than a set speed X Select Resume. X Select a warning tone for the respective safety warning. 148 Using the navigation system

Using the smart Media-System.

For the "Warn when driving faster than a

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 157 · Applies to: 453

set speed" function, the speed above which the warning tone should sound must be entered. Setting the units of measurement for distance All units of measurement for distance in the navigation system can be changed. The units of measurement for distance of other displays are not changed, such as distance displays for the eco score or the on-board computer. X Select System > Set units > Distance units. Select one of the following settings: RKilometres RMiles Setting the units for GPS coordinates X Select System > Set units > GPS coordi‐ nate display. Select one of the following settings: RDegrees (d°) RDegrees, Minutes (d° m.m') RDegrees, Minutes, Seconds (d° m' s'') Using the navigation system 149

Using the smart Media-System. Z

Online access to the vehicle

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 158 · Applies to: 453

G WARNING If you operate information and communi- cation equipment integrated in the vehi- cle when driving, you could be distracted from the traffic situation. This could also cause you to lose control of the vehicle. There is a risk of an accident. Only operate this equipment when the traffic situation permits. If you cannot be sure of this, stop the vehicle paying attention to road and traffic conditions and operate the equipment with the vehi- cle stationary. G WARNING If you use mobile information systems and communications devices while driv- ing, you will be distracted from traffic conditions. You could then lose control of the vehicle. There is a risk of an accident. Only operate these devices when the vehicle is stationary. Observe the legal requirements for the country in which you are currently driving. You can use "smart control" services to access remote query and to configure your vehicle remotely. It can be accessed from computers and smartphones. The Internet address is available from any smart Centre. It is also possible to call up "smart control" services via the smart website. Access to "smart control" services is free of charge for the first three years commencing from handover of the new vehicle, subject to the availability of the service. Thereafter you can continue to subscribe to use "smart control" services. The availability and functions of "smart control" services may vary from country to country. Requirements for the use of "smart control" services: RRegistration on the "smart portal" Inter- net page via http://www.smart.com/ portal. A valid e-mail address or mobile phone number is necessary for registration and the terms of use must be accepted. RThe vehicle must be linked with a per- sonal "smart portal" account at a smart Centre. Verification and presentation of the vehicle registration document are required to link the vehicle. The vehicle identification number (VIN) is also required. RThe desired functions must be activated after linking the vehicle. For activation, "smart control" services' terms of use for both remote query and remote configuration must be accepted via the "smart portal". The portal address is supplied by the smart Centre. RThe vehicle must be connected to the Internet. Connection is made possible via the mobile communications module integra- ted in the vehicle. Once these requirements are fulfilled, the following functions, for example, may be used: RActivating the pre-entry climate control for the vehicle interior. RCalling up information on the distance before the next recommended service or if a service is already due. RConvenient charging with automatic authentication and cashless payment. During the charging process, additional displays can be called up such as the pre- dicted time until charging is completed or the charging capacity. If there is a delay in the synchronisation of data via the mobile phone network, the dis- plays in the vehicle and for "smart control" services may temporarily differ from each other. Further information on "smart control" services is available at any smart Centre and via http://www.smart.com/portal. 150 Online access to the vehicle

Using online offerings.

Using smart "ready to" services

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 159 · Applies to: 453

Useful information smart "ready to" services are only available in certain countries. The functions are enabled via a communi- cation module and the smart "ready to" app. Information and the Internet addresses for the smart "ready to" services are available at any smart Centre. i If you are already using a smart "ready to" service, additional services can be activated with your user details in the usual web portal or via the app. The communication module and activation are required in order to use the smart "ready to" services: RRegister on the "ready to" web portal. A valid e-mail address and the vehicle identification number (VIN) are neces- sary for registration, and the terms of use must be accepted. RInstall the "ready to" app on your smart- phone and create a user account. Using the Key Card Holder Key Card Holder : is located in the glove compartment and is intended for the stor- age and inventory of the vehicle key and up to two cards (e.g. fuel card, parking card or car wash card). The inventory is available within certain smart "ready to" services. For an inventory, the key and/or the cards must be equipped with an RFID tag. Further information about RFID tags is available from any smart Centre. Using smart "ready to" services 151

Using online offerings. Z

Stowing small objects

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 160 · Applies to: 453

Please note G WARNING If you stow objects in the vehicle interior in an unsuitable way, they could slip or be thrown around and thus hit vehicle occupants. Additionally, the cup holders, open stowage spaces and mobile phone brackets cannot restrain the objects placed in them in the event of an acci- dent. There is a risk of injury, especially in the event of braking or sudden changes in direction. RAlways stow objects so they cannot be thrown around in these or similar sit- uations. RAlways ensure that objects do not pro- trude over the top of stowage compart- ments or ruffled pockets. RAll closable stowage compartments should be closed before beginning your journey. RAlways stow and secure heavy, hard, pointed, sharp-edged, fragile objects or objects which are too large behind the last bench seat or under the passenger seats. G WARNING The cup holder cannot secure a drinks container in place during a journey. If you use a cup holder during a journey, the drinks container could be flung around and liquid could be spilt. Vehicle occupants could come into contact with the liquid and, in particular, be scalded by hot liquid. You could be distracted from the traffic situation and lose control of the vehicle. There is a risk of an acci- dent and injury. Only use the cup holder when the vehicle is stationary. Only place containers of a suitable size in the cup holder. Seal the container, in particular when it contains hot liquid. ! Only use the cup holders for containers of the right size and which have lids. The drinks could otherwise spill. Using the compartments X To stow objects, use suitable stowage spaces. The following stowage spaces are availa- ble: R: Stowage compartments in the doors R; Cup holder in the front centre con- sole R= Glove compartment R? Stowage net in the front passenger footwell RA Sliding drawer in the centre console RBracket on the seat for a tablet RVelcro strip on the front passenger seat for stowing a handbag RCup holder in the rear centre console with a recess for storing a mobile phone Rreadyspace seats: cargo box with cup holders in the rear compartment RParcel shelf 152 Stowing small objects

Loading and stowing.

Locking/unlocking the glove compart-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 161 · Applies to: 453

ment

X Insert the key into the lock.

X To lock: turn the key to position 2.

X To unlock: turn the key to position 1.

Using the rear cup holders (ready-

space seats)

In conjunction with readyspace seats, two

cup holders : and ; are available for use

in the rear.

X Open the stowage compartment in order

to use cup holder ;.

Cup holder ; can be removed. The maxi-

mum load for the stowage compartment is

1 kg.

Removing and fitting the rear shelf

Removing the rear shelf

! The maximum load which may be placed

on the parcel shelf is 3 kg.

Straps ; Rear shelf X Detach the straps from the tailgate. X Fold down the rear shelf. X Pull the rear shelf out to the rear. Fitting the rear shelf X Place the rear shelf on the guide rails on the left and right. X Push the rear shelf forwards until it engages. X Fold the rear shelf upwards. X Attach straps to the tailgate. Stowing luggage and large objects Please note G WARNING If you stow objects in the vehicle interior in an unsuitable way, they could slip or be thrown around and thus hit vehicle occupants. Additionally, the cup holders, open stowage spaces and mobile phone brackets cannot restrain the objects placed in them in the event of an acci- dent. There is a risk of injury, especially in the event of braking or sudden changes in direction. Stowing luggage and large objects 153

Loading and stowing. Z

RAlways stow objects so they cannot be

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 162 · Applies to: 453

thrown around in these or similar sit- uations. RAlways ensure that objects do not pro- trude over the top of stowage compart- ments or ruffled pockets. RAll closable stowage compartments should be closed before beginning your journey. RAlways stow and secure heavy, hard, pointed, sharp-edged, fragile objects or objects which are too large behind the last bench seat or under the passenger seats. The handling characteristics of a laden vehicle are dependent on the distribution of the load within the vehicle. Observe the following loading guidelines when loading and transporting luggage and loads: Rdo not exceed the maximum permissible gross vehicle weight or the permissible axle loads for the vehicle (including occupants) Rthe load compartment is the preferred place to stow objects Rstow heavy loads as far forwards and as low down in the load compartment as possible Rthe load must not protrude above the upper edge of the seat backrests Ralways place the load against the rear or front seat backrests. Make sure that the seat backrests are securely locked in place Ralways transport the load behind unoc- cupied seats if possible Rsecure the load and luggage suitably Opening the boot ! The tailgate swings upwards and to the rear when opened. Therefore, make sure that there is sufficient clearance above and behind the tailgate. X Press the % button on the key. X Press button :. X Fold the tailgate up. Closing the boot X Pull the tailgate down and close. X Press the & button on the key. The vehicle is locked. Using lashing eyelets To prevent damage, observe the following: RSecure the load using lashing eyelets :. RDistribute the load on the lashing eyelets evenly. RDo not use elastic straps or nets. RPad any sharp edges. 154 Using lashing eyelets

Loading and stowing.

Enlarging the load compartment

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 163 · Applies to: 453

Folding the rear seat backrest forward G WARNING If the rear bench seat/rear seat and seat backrest are not engaged they could fold forwards, e.g. when braking suddenly or in the event of an accident. RThe vehicle occupant would thereby be pushed into the seat belt by the rear bench seat/rear seat or by the seat backrest. The seat belt cannot protect as intended and could result in addi- tional injury. RObjects or loads in the boot/luggage compartment cannot be restrained by the seat backrest. This poses an increased risk of injury. Before every trip, make sure that the seat backrests and the rear bench seat/rear seat are engaged before every trip. X Push the head restraints all the way in. X Pull right or left loop : on the seat backrest in the direction of the arrow. X Fold down the seat backrest fully. Folding back the rear seat backrests ! Make sure that the seat belt does not become trapped when folding the rear seat backrest back. Otherwise, it could be damaged. X Fold back the left or right seat backrest until it engages. Red lock status indicator : on the loop must no longer be visible. Folding the front-passenger seat backrest forwards Folding down the front-passenger seat backrest (using the lever) Seat with a lever X Lift lever ; and slide the front passenger seat to its rearmost position. X Pull lever : forwards. X Fold the seat backrest forwards at the same time. Enlarging the load compartment 155

Loading and stowing. Z

Folding down the front-passenger seat

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 164 · Applies to: 453

backrest (using the handwheel) Seat with a handwheel X Turn handwheel : forward. Folding back the front-passenger seat backrest Please note G WARNING If the seat backrest is not engaged, it may fold forwards, e.g. during braking or in the event of an accident. RAs a result, a backrest which is not engaged would press you into the seat belt. The seat belt cannot perform its intended protective function and could additionally cause injury. RThe backrest cannot restrain objects or loads in the boot. This poses an increased risk of injury. Before every journey, make sure that the backrest is engaged as described. Folding back the front-passenger seat backrest (using the lever) X Pull lever :. X Push the seat backrest back at the same time until it engages. Folding back the front-passenger seat backrest (using the handwheel) X Turn handwheel : backwards. Adjusting the angle of the rear seat backrests (cargo position) X Release right-hand or left-hand seat backrest ;. X Fold right-hand or left-hand seat back- rest ; slightly forwards. X Fold seat backrest catch : forwards. X Fold right-hand or left-hand seat back- rest ; back to seat backrest catch : until it engages. Folding seat cushions forwards (readyspace seats) G WARNING If you rotate the rear seat cushion when the cargo box is removed, you or other vehicle occupants could be caught in the seat mechanism. There is a risk of injury. Only rotate the seat cushion if the cargo box is fitted. Ensure that no parts of the body are in the immediate vicinity of moving parts. ! Do not fold the rear seat backrests for- wards if the rear seat cushions have been rotated. Otherwise, the rear seat backr- ests may be damaged. 156 Enlarging the load compartment

Loading and stowing.

X Pull loop : and fold the seat cushion

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 165 · Applies to: 453

forwards. Removing the cargo box (readyspace seats) X Release the cargo box using handle :. X Using both hands, reach into the handle recesses at the front and behind and push the cargo box forwards and up at a slight angle. X Remove the cargo box. Removing/fitting the charging cable bag Removing the charging cable bag X Turn both buttons : to the left. The buttons are released from the anchorage. X Fold the charging cable bag to the left. The Velcro fasteners under the charging cable bag are detached. X Remove snap hook ;. Installing the charging cable bag X Place the charging cable bag with its side resting on the engine compartment cover and then position it on the side trim. X Position the charging cable bag in a ver- tical position. Take hold of the Velcro fasteners beneath the charging cable bag. X Push both buttons : into the anchorage and turn them to the right. X Secure snap hook ;. Removing/fitting the charging cable bag 157

Loading and stowing. Z

Useful information

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 166 · Applies to: 453

The engine compartment in the smart is located at the rear, below the boot. Service fluid reservoirs are located under the ser- vice cover at the front. When working on the vehicle, always com- ply with all safety regulations. Always have work in the engine compartment car- ried out at a qualified specialist workshop. Removing/fitting the subwoofer Removing the subwoofer X Release quick-release fastener : in the direction of the arrow. X Reach into the recess on the quick- release fastener. X Detach, tilt and pull the subwoofer to the right. X Pull out the connector. Fitting the subwoofer X Insert the connector. X Place the subwoofer at the base of the side trim. X Turn quick-release fastener : upwards. X Press the bracket into the recess in side trim ;. X Turn quick-release fastener : clock- wise. Opening and closing the service cover Please note G WARNING If the service cover is not locked, it may come loose during driving and block your view or endanger other road users. There is a risk of an accident and injury. Therefore, make sure that the service cover is locked before driving off. G WARNING If the windscreen wipers start to move when the service cover is open, you could become caught up in the wiper rods. There is a risk of injury. Always switch off the windscreen wipers and the ignition before you open the ser- vice cover. ! To ensure unhindered air intake, com- pletely remove any dirt or snow from the ventilation slots above the service cover. The vehicle must be secured against rolling away. On vehicles with a lockable service cover, the service cover must be unlocked before it is opened. 158 Opening and closing the service cover

Maintenance and care.

Unlocking the service cover

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 167 · Applies to: 453

X Insert the tip of the key into the opening of lock cover :. X Press the key to the right ; to lever up the lock cover. X Remove the lock cover. X Insert the key into the lock and turn it 90° clockwise. Opening the service cover X Pull both levers ; in the direction of the arrow. X Lift service cover = at the front. X Pull service cover = slightly forwards and lift upwards. X Put down service cover =. Closing the service cover X Unhook service cover =. X Slide bars A on the left and right of the service cover under the bars on wing ?. X Press service cover = downwards. X Press both levers ; backwards in the direction of the arrow. Locking the service cover X Insert the key into the lock and turn it to position 1. X Insert lock cover : on the driver's side and snap it into place. Opening and closing the service cover 159

Maintenance and care. Z

Checking service products and top-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 168 · Applies to: 453

ping up Please note G WARNING Service product can be poisonous and hazardous to health. There is a risk of injury. Observe the instructions on the respec- tive original container when using, stor- ing and disposing off service products. Always store service products in the sealed original container. Always keep service products out of the reach of chil- dren. H Environmental note Dispose of service products in an envi- ronmentally-responsible manner. Also observe the information in the "Service products" section (Y page 215). Service products include the following: Rcoolant Rbrake fluid Rwindscreen washer fluid Rclimate control system refrigerant Service products approved for smart: http://bevo.mercedes-benz.com Checking the coolant and topping up Checking the coolant level X Stop the vehicle on a level surface. X Let the coolant cool down for at least 30 minutes. X Open the service cover. (Y page 158) X Check reservoir ; visually. The fluid level must be between the MIN mark and the MAX mark. Topping up the coolant G WARNING The cooling system is pressurised when the drive system is at normal operating temperature. When you open the cap, you could be scalded by hot coolant spraying out. There is a risk of injury. Let the drive system cool down before you open the cap. Wear protective gloves and eye protection when opening. Open the cap slowly to relieve pressure. ! Add only coolant that has been pre- mixed with the desired antifreeze protec- tion. You could otherwise damage the engine. You can find additional notes on the coolant in the following places: Rin the Mercedes-Benz Specifications for Service Products, MB BeVo 310.1 - on the internet at http://bevo.mercedes-benz.com - on the Mercedes-Benz BeVo app Rat a qualified specialist workshop If antifreeze/corrosion inhibitor is present in the correct concentration, the boiling point of the coolant during operation is approximately 130 †. The antifreeze/corrosion inhibitor concen- tration in the engine cooling system should be between 40% and 50% (antifreeze protec- tion down to -37 †). This will protect the engine cooling system against freezing down to approximately -25 †. X Cover cap : of coolant expansion tank ; with a cloth. X Turn the cap slowly one half turn. If nec- essary, allow excess pressure to escape. X Turn the cap further and remove it. X Top up the coolant to the MAX level. 160 Checking service products and topping up

Maintenance and care.

X Replace the cap and tighten it as far as it

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 169 · Applies to: 453

will go. X Close the service cover. (Y page 158) i See "Technical data" for information on recommended coolants. Topping up the washer fluid G WARNING Windscreen washer concentrate is highly flammable. If it comes into contact with hot components in the front compart- ment, it may ignite. There is a risk of fire and injury. Make sure that windscreen washer con- centrate is not spilled next to the filler neck. X Open the service cover. (Y page 158) X Pull cap : upwards at the tab. X If available, pull the removable nozzle up as far as the stop. X Top up with washer fluid. X If available, push the removable nozzle down and push it inside. X Replace and tightly screw on cap :. X Close the service cover. (Y page 158) i See "Technical data" for information on windscreen washer fluid and antifreeze. Checking wheels and tyres G Warning A flat tyre severely impairs the driving, steering and braking characteristics of the vehicle. There is a risk of an accident. Do not drive with a flat tyre. Immediately replace the flat tyre with your spare wheel, or consult a qualified specialist workshop. G WARNING Damaged tyres can cause tyre inflation pressure loss. As a result, you could lose control of your vehicle. There is a risk of accident. Check the tyres regularly for signs of damage and replace any damaged tyres immediately. G WARNING If there is insufficient tyre tread, the tyre traction will decrease. The tyre tread can no longer dissipate water. This increases the risk of aquaplaning on a wet road surface, especially when the vehicle's speed is not adapted to the road condi- tions. There is a risk of an accident. If the tyre pressure is too high or too low, tyres may wear differently at different points of the tyre tread. Regularly check the tyre tread depth and the condition of the tread across the whole width of all tyres, therefore. Minimum tyre tread depth on: RSummer tyres: 3 mm RM+S tyres: 4 mm For safety reasons, have the tyres replaced before the legally specified minimum tread depth is reached. ! If you cannot avoid driving over obsta- cles, e.g. kerbs, do so slowly and at an obtuse angle only. You could otherwise damage the wheel rims and tyres. Checking wheels and tyres 161

Maintenance and care. Z

Modification work on the brake system and

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 170 · Applies to: 453

wheels is not permitted. The use of spacers or brake dust shields is not permitted. This invalidates the general operating permit for the vehicle. Check the wheels and tyres for damage at least once a month, as well as after driving off-road or on poorly surfaced roads. Run-in new tyres at moderate speeds for the first 100 km. The tyres only attain their maximum performance after this distance. Vibrations, audible noises and unusual handling characteristics, e.g. pulling to one side, can indicate damage to wheels or tyres. If you suspect a tyre defect: X Reduce vehicle speed. X Stop the vehicle as soon as possible. X Check the wheels and tyres for damage. If you find no signs of damage, have the wheels and tyres checked at a specialist workshop. Changing a wheel Please note G WARNING Interchanging the front and rear wheels if the wheels or tyres have different dimensions may severely impair the driving characteristics. The service brake or wheel suspension components may also be damaged. There is a risk of an accident. Rotate front and rear wheels only if the wheels and tyres are of the same dimen- sions. G WARNING Exceeding the stated tyre load-bearing capacity and the approved maximum speed could lead to tyre damage or the tyre bursting. There is a risk of accident. Therefore, only use tyre types and sizes approved for your vehicle model. Observe the tyre load rating and speed rating required for your vehicle. G WARNING If you fit wheels and tyres with incorrect dimensions, the service brake or wheel suspension components may be damaged. There is a risk of an accident. Always replace wheels and tyres with ones that comply with the specifications of the original part. When replacing wheels, pay attention to the: Rdesignation Rtype When replacing tyres, pay attention to the: Rdesignation Rmanufacturer Rtype ! To prevent damage, smart recommends having the wheel changed at a qualified specialist workshop. ! On vehicles fitted with a tyre pressure monitor, electronic components are loca- ted in the wheel. Tyre-fitting tools should not be applied in the area of the valve, since this could damage the electronic components. Only have tyres changed at a qualified specialist workshop. ! Only position a suitable jack on the jacking point intended for the purpose. Only raise the vehicle briefly to change the wheel. Make sure that there are no persons in the vehicle and that it is on a suitable surface. Secure the vehicle with wheel chocks and apply the parking brake. Interchanging front and rear wheels or tyres of differing dimensions can render the general operating permit invalid. Rules for selecting new tyres ! For safety reasons, smart recommends that you only use wheels and tyres which smart has specifically approved for your 162 Changing a wheel

Maintenance and care.

vehicle. These are specially adapted to

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 171 · Applies to: 453

the systems, such as ABS or ESP®. Only use tyres and wheels tested and recommended by smart. Certain charac- teristics, such as handling, vehicle noise emissions, fuel consumption, etc. may otherwise be adversely affected. Dimen- sional variations and altered tyre defor- mation when driving under load may also cause the tyres to come into contact with the vehicle body and axle components. This may result in damage to the tyre or the vehicle. smart is not responsible for any damage caused by using tyres and wheels other than those which have been tested and recommended. You can obtain information about tyres and wheels from any qualified specialist workshop, e.g. a smart Centre. The service life of tyres depends on various factors, including the following: Rdriving style Rtyre pressure Rmileage Observe the following rules for selecting new tyres: Robserve country-specific regulations which stipulate or recommend a certain tyre type for the vehicle. Ronly fit tyres and wheels of the same type and make. Ronly tyres of the same size may be used on a single axle (left/right). Ronly use tyres of the same type (summer tyres, all-season tyres, winter tyres). Ronly use wheel-tyre combinations approved by smart. Rdo not wear tyres out too much. This oth- erwise significantly reduces the traction on wet roads (aquaplaning). Rreplace tyres after six years at the latest. Rthe use of a specific tyre type in certain regions and areas of operation can be highly beneficial. i Recommended tyre pressures for vari- ous operating states can be found on the tyre pressure table on the driver's side door pillar (B-pillar). You can find further information regarding tyres and wheels at specialist tyre retail- ers, at qualified specialist workshops and at any smart Centre. Preparing to change a wheel The vehicle tool tray is located under the glove compartment. X Stop the vehicle on solid, non-slippery and level ground. X Apply the parking brake. X Position the front wheels to point straight ahead. X Shift the transmission to position j. X Switch off the engine. X Remove the key from the ignition lock. X Secure the vehicle against rolling away. Removing a wheel G WARNING If you do not position the jack correctly at the appropriate jacking point of the vehicle, the jack could tip over with the vehicle raised. There is a risk of injury. Only position the jack at the appropriate jacking point of the vehicle. The base of the jack must be positioned vertically, directly under the jacking point of the vehicle. ! Do not place wheel bolts in sand or dirt. The threads of the wheel bolts and wheel hubs could otherwise be damaged when the bolts are tightened. ! Position a suitable jack only on the jacking points intended for this purpose. Never position the jack on the high-volt- age battery. Do not jack up the vehicle on the high-voltage battery. There is other- wise a risk of damaging the high-voltage battery. Also observe the notes in the "Changing a wheel" section. Changing a wheel 163

Maintenance and care. Z

Warning stickers

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 172 · Applies to: 453

Always pay attention to the instructions

and safety notes on "Changing a wheel"

(Y page 162).

Vehicles with steel wheels and hub caps:

X Using both hands, grasp two hub cap

openings and remove the hub cap.

Vehicles with steel wheels and hub cap

cover:

X Remove the hub cap cover.

Wheel wrench X Using wheel wrench : loosen the wheel bolts by about one turn. Do not unscrew the wheel bolts completely. ; Jack = Reinforced area for the jacking points Jack ; may only be positioned on the reinforced area intended for this purpose for jacking points =. The vehicle may be damaged if jack ; is positioned at another point on the sill. = Reinforced area for the jacking points ? Triangular indentation A Outer covering of the sill 164 Changing a wheel

Maintenance and care.

! To prevent damage, smart recommends

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 173 · Applies to: 453

having the wheel changed at a qualified specialist workshop. The reinforced areas for jacking points = are located behind the front wheels and in front of the rear wheels. They can be recog- nised by triangular indentations ? on the vehicle. Jack ; may only be positioned on the reinforced areas for jacking points = on the sill and not on the outer covering of sill A. X Search for the reinforced area for jacking points = which is found approx. 7 cm behind the sill at triangular indenta- tions ?. X Position jack ; under the corresponding reinforced area for jacking points =. X Set the foot of the jack up vertically with respect to the reinforced area for the jacking points on the vehicle. X Make sure that the jack is correctly posi- tioned so that the vehicle cannot slip. X Raise the vehicle using the jack until the tyre is a maximum of 3 cm off the ground. X Unscrew and remove the wheel bolts. X Remove the wheel. Fitting a wheel G WARNING The wheels could come loose if the wheel bolts or wheel nuts are not tightened to the prescribed tightening torque. There is a risk of an accident. Ensure that the wheel bolts or wheel nuts are tightened to the prescribed tighten- ing torque. If you are not sure, do not move the vehi- cle. Contact a qualified specialist work- shop and have the tightening torque checked immediately. The tightening torque must be 105 Nm. After travelling approx. 500 km, check the tightening torque and retighten if neces- sary. G WARNING If you tighten the wheel bolts or wheel nuts when the vehicle is raised, the jack could tip over. There is a risk of injury. Only tighten the wheel bolts or wheel nuts when the vehicle is on the ground. ! When changing a wheel, only use wheel bolts which have been approved for wheel rims and the vehicle. Always pay attention to the instructions and safety notes on "Changing a wheel" (Y page 162). Fit tyres with a specified direction of rota- tion only according to their direction of rotation. An arrow on the sidewall of the tyre indicates its correct direction of rota- tion. X Clean the wheel and wheel hub contact surfaces. X Push the wheel onto the wheel hub and press it on. X Screw in the wheel bolts up to the cone. X Make sure that they sit securely on the cone. Changing a wheel 165

Maintenance and care. Z

X Lower the vehicle all the way.

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 174 · Applies to: 453

X Remove the jack. X Tighten the wheel bolts evenly in a crosswise pattern in sequence indica- ted : to ?. The tightening torque must be 105 Nm. X Check the recommended tyre pressure and adjust if necessary. After travelling approx. 500 km, check the tightening torque and retighten if neces- sary. i Vehicles with tyre pressure control sys- tem: all fitted wheels must be equipped with functioning sensors. Vehicles with steel wheels and hub caps: X Fit hub cap A such that valve B does not become trapped. X Press the hub cap evenly onto the wheel with both hands until you hear the hub cap engage. X Check to make sure the hub cap is seated securely on the wheel. Vehicle with steel wheels and wheel hub covers: X Fit the hub cap cover. Storing wheels X Store wheels in a cool, dry and dark place when not in use. X Protect against oil and grease. Using the tyre pressure monitor Useful information It is the driver's responsibility to set the tyre pressure to the recommended cold tyre pressure suitable for the operating situa- tion. The tyre pressure monitor issues a warning when the pressure drops in one or more of the tyres. The tyre pressure monitor works properly only if sensors are present in all four tyres, and after the monitor has learned the cor- rect tyre pressure for the current operating situation. This occurs automatically in most situations, but may also be specified after restarting the tyre pressure monitor. Before restarting, check the tyres for the recommended tyre pressure. The tyre pressure monitor does not provide a warning in the following cases: Reven loss of pressure on multiple tyres Rsudden loss of tyre pressure, e.g. due to penetration by a foreign body Rincorrectly set tyre pressure The tyre pressure monitor has a yellow warning lamp in the instrument cluster for indicating a pressure loss or malfunction. Restarting the tyre pressure monitor (on-board computer with a mono- chrome display) X Set the tyre pressure of all tyres to the recommended value. X On the multifunction lever, press the ´ button repeatedly until the ° and h symbols are displayed in the instrument cluster display. X Press and hold the a button on the multifunction lever. The ° and h symbols flash in the instrument cluster display for approx- 166 Using the tyre pressure monitor

Maintenance and care.

imately five seconds. The two symbols

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 175 · Applies to: 453

then light up. The tyre pressure monitor is restarted. Restarting the tyre pressure monitor (on-board computer with colour dis- play) X Set the tyre pressure of all tyres to the recommended value. X Select Settings > Tyre pressure moni‐ tor in the on-board computer. The Tyre pressure monitor Adopt cur‐ rent pressures as new reference values? message appears in the display. X Select Yes and press a to confirm. The display shows the Tyre pressure monitor restarted message. If the Tyre pressure monitor restarted message does not appear after five seconds, restart the tyre pressure monitor again. Checking the tyre pressures Please note G WARNING Underinflated or overinflated tyres pose the following risks: Rthe tyres may burst, especially as the load and vehicle speed increase. Rthe tyres may wear excessively and/or unevenly, which may greatly impair tyre traction. Rthe driving characteristics, as well as steering and braking, may be greatly impaired. There is a risk of an accident. Observe the recommended tyre pressure and check the tyre pressure of all the tyres: Rat least every two weeks Rwhen the load changes Rbefore embarking on a longer journey Rfor changed operating conditions, e.g. off-road driving If necessary, correct the tyre pressure. G WARNING If you mount unsuitable accessories onto tyre valves, the tyre valves may be over- loaded and malfunction, which can cause tyre pressure loss. Aftermarket tyre pres- sure monitoring systems will cause the tyre valve to remain open. This can also result in tyre pressure loss. There is a risk of an accident. Only screw standard valve caps or valve caps specifically approved by smart for your vehicle onto the tyre valve. G WARNING If the tyre pressure drops repeatedly, the wheel, valve or tyre may be damaged. Tyre pressure that is too low may result in a tyre blow-out. There is a risk of acci- dent. RCheck the tyre for foreign objects. RCheck whether the wheel is losing air or the valve is leaking. If you are unable to rectify the damage, contact a qualified specialist workshop. H Environmental note Check the tyre pressure regularly, at least every 14 days. Checking the tyre pressures 167

Maintenance and care. Z

The table with the recommended tyre pres-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 176 · Applies to: 453

sure for various operating conditions can be found on the driver's side door pillar (B-pillar). The tyre pressure table may also state air pressures for different load conditions. These are defined in the table as different numbers of passengers and amounts of lug- gage. The actual number of seats may differ from this. If a tyre size precedes a tyre pressure, the tyre pressure information following is only valid for that tyre size. If tyre sizes are not specified, the tyre pressures stated on the tyre pressure table apply for all approved tyres. Checking and correcting the tyre pressure manually Only check the tyre pressure once the tyres have cooled down. X Drive the vehicle less than 2 km. X Park the vehicle away from direct sun- light for at least three hours. X Check the tyre pressure with a suitable tyre pressure gauge. X If necessary, adjust the tyre pressure. X Restart the tyre pressure monitor. Using winter tyres G WARNING M+S tyres with a tyre tread depth of less than 4 mm are not suitable for use in winter as they do not provide sufficient traction. There is a risk of accident. M+S tyres with a tread depth of less than 4 mm must be replaced. At temperatures below +7 †, summer tyres lose elasticity and therefore traction and braking power. Change the tyres on your vehicle therefore to winter tyres or all-sea- son tyres marked with M+S. Using summer tyres at very cold temperatures could cause tears to form, thereby damaging the tyres permanently. smart cannot accept respon- sibility for this type of damage. Have the vehicle winterproofed at a quali- fied specialist workshop at the onset of winter. X At low temperatures, use only winter tyres marked with M+S. X When road conditions are wintry, use M+S tyres with the additional i snow- flake symbol. These tyres allow driving safety systems, e.g. ABS, to function optimally in the winter. X Use M+S tyres of the same make and tread on all wheels. X When driving with M+S tyres, observe the specified maximum permissible speed. X Use only tyre types and sizes approved for smart. X When using tyres with a specified direc- tion of rotation, observe the arrow on the sidewall indicating the tyre's direction of rotation. After fitting M+S tyres: X Check the tyre pressure. X Restart the tyre pressure monitor. X If M+S tyres with a lower maximum per- missible speed than that of the vehicle are fitted, affix an appropriate warning label in the driver's field of vision. Using the limiter, restrict the speed to the max- imum permissible speed for M+S tyres. Using snow chains G WARNING If you have fitted snow chains to the front wheels, they may scrape against the vehicle body or chassis components. This could cause damage to the vehicle or the tyres. There is a risk of an accident. To avoid hazardous situations: Rnever fit snow chains on the front wheels Rfit snow chains to the rear wheels in pairs. ! Vehicles with steel wheels: if you fit snow chains on steel wheels, you may damage the hub caps. Remove the hub 168 Using snow chains

Maintenance and care.

caps from the relevant wheels before fit-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 177 · Applies to: 453

ting the snow chains. For safety reasons, smart recommends that you only use snow chains that have been specially approved for your vehicle by smart. Further information can be obtained at a smart Centre or a qualified specialist workshop. X Observe country-specific regulations. X Use only snow chains approved for smart. X Fit snow chains on both rear wheels. X Use snow chains only on snow-covered roads. X When driving with snow chains fitted, do not exceed the maximum permissible speed of 50 km/h. Changing the window wiper blades Please note G WARNING If the windscreen wipers begin to move while you are changing the wiper blades, you can be trapped by the wiper arm. There is a risk of injury. Always switch off the windscreen wipers and ignition before changing the wiper blades. ! Never open the service cover or tailgate if a wiper arm has been folded away from the windscreen or rear window. Never fold a wiper arm without a wiper blade back onto the windscreen or rear window. Hold the wiper arm firmly when you change the wiper blade. If you release the wiper arm without a wiper blade and it falls onto the window, the window may be damaged by the force of the impact. Changing the window wiper blades on the windscreen X Fold the wiper arm away from the wind- screen. X Release tab ; of bracket ? must be pressed towards windscreen 3. The catch tab is released from the bracket and the wiper blade can be pulled away from the wiper arm. X Slide window wiper blade : in the direc- tion of arrow 5 until the securing hook for the window wiper blade is revealed. X Remove the window wiper blade. X Slide new window wiper blade : in the direction of arrow 4 onto mounting = of wiper arm ;. The window wiper blade snaps into place. X Check that the window wiper blade is positioned correctly. X Carefully fold wiper arm ; onto the windscreen. Changing the window wiper blades 169

Maintenance and care. Z

Changing the rear window wiper blade

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 178 · Applies to: 453

X Remove the key from the ignition lock. X Fold wiper arm : away from the rear window until you hear it engage. X Pull window wiper blade ; in the direc- tion of the arrow until it is released from the retainer on the wiper arm. X Remove window wiper blade ;. X Slide new window wiper blade ; onto wiper arm : until it engages. X Turn window wiper blade ; parallel to wiper arm :. X Check that window wiper blade ; is positioned correctly. X Fold wiper arm : back onto the rear window. Cleaning the vehicle Useful information Regular care maintains the appearance and quality of the vehicle over time. Observe the following when cleaning and caring for the vehicle: X Do not clean the engine. X Do not clean the vehicle whilst charging. X Use soft, moist cloths. X Use care products and cleaning agents recommended and approved for smart. X Do not use acidic cleaning agents. X In winter, carefully remove road salt as soon as possible. Cleaning the vehicle exterior Washing in an automatic car wash or washing by hand Preparing the vehicle for cleaning G WARNING Braking efficiency is reduced after the vehicle has been washed. There is a risk of an accident. After washing the vehicle, brake carefully while paying attention to the traffic con- ditions in order to restore full braking efficiency. X Close the side windows completely. X Switch off the climate control blower. X Turn the windscreen wipers to position g. Washing in an automatic car wash X Prepare the vehicle for cleaning. X Remove excess dirt. X Drive through the automatic car wash. X Remove wax from the front windscreen and the wiper blades. i If the windscreen wipers leave smears after the vehicle has passed through the car wash, this may be caused by wax or other residue. This residue can be removed with washer fluid. Washing by hand X Locate a washing bay equipped for hand- washing. X Prepare the vehicle for cleaning. X Apply mild cleaning agent with a soft vehicle sponge. X Thoroughly hose the vehicle with a gen- tle jet of water; do not point the water jet directly towards the air inlet grille. X Dry the vehicle off with a chamois. Cleaning with a high-pressure cleaner G WARNING The water jet of circular-jet nozzles (dirt grinders) can cause damage not visible from the outside to tyres or chassis com- 170 Cleaning the vehicle

Maintenance and care.

ponents. Components damaged in this

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 179 · Applies to: 453

way can unexpectedly fail. There is a risk

of an accident.

Do not use high-pressure cleaners with

circular-jet nozzles to clean the vehicle.

Have damaged tyres or chassis compo-

nents replaced immediately.

! Always maintain a distance of at least

30 cm between the vehicle and the high-

pressure cleaner nozzle. Information

about the correct distance is available

from the equipment manufacturer.

Move the high-pressure cleaner nozzle

around when cleaning your vehicle.

Do not aim directly at any of the follow-

ing:

Rtyres

Rdoor gaps, roof gaps, joints etc.

Relectrical components

Rbattery

Rplug-type couplings

Rlight bulbs

Rseals

Rtrim elements

Rventilation slots

Damaged seals or electrical components

can lead to leaks or failures.

X Prepare the vehicle for cleaning.

X Maintain a distance of at least 30 cm

between the high-pressure cleaner noz-

zle and the vehicle.

X Keep moving the nozzle whilst cleaning.

Cleaning the reversing camera

X Clean camera lens : with water and a

soft cloth.

Cleaning the sensors

Active Brake Assist sensor ; Parking aid sensors X Clean sensors with water, car shampoo and a soft cloth. Cleaning the wheels G WARNING The water jet of circular-jet nozzles (dirt grinders) can cause damage not visible from the outside to tyres or chassis com- ponents. Components damaged in this way can unexpectedly fail. There is a risk of an accident. Do not use high-pressure cleaners with circular-jet nozzles to clean the vehicle. Have damaged tyres or chassis compo- nents replaced immediately. ! Do not use acidic wheel cleaning prod- ucts to remove brake dust. This could damage wheel bolts and brake compo- nents. ! Do not park up your vehicle for a long period of time immediately after clean- ing, particularly after cleaning the wheel rim with wheel cleaner. Wheel cleaner may lead to increased corrosion of the Cleaning the vehicle 171

Maintenance and care. Z

brake discs and pads. You should there-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 180 · Applies to: 453

fore drive for a few minutes after clean- ing. By heating up the brakes, the brake discs and pads dry. The vehicle can then be parked up for a long period of time. X Clean the wheels with an acid-free clean- ing agent. Cleaning the windows and windscreen wipers Cleaning the windows G WARNING If the windscreen wipers are set in motion when cleaning the windscreen or wiper blades, you could become trapped. There is a danger of injury. Always switch off the windscreen wipers and the ignition before cleaning the windscreen or wiper blades. X Place the wiper arms in the vertical posi- tion and fold them away from the win- dow. X Clean the inside and outside of the win- dows with a damp cloth and a cleaning agent recommended for smart. X Clear deposits regularly from the wind- screen and rear window to ensure that water can drain unhindered. Cleaning the window wiper blades X Place the wiper arms in the vertical posi- tion and fold them away from the win- dow. X Clean the window wiper blades with a soft cloth. X Fold the wiper arms back into place. Cleaning the panoramic roof ! Only use cleaning agents or cleaning cloths that are suitable for plastic lenses. Unsuitable cleaning agents or cleaning cloths could scratch or damage the plas- tic panes of the panorama roof. Do not use cleaning agents containing solvents X Apply mild cleaning agent for plastic windows and wipe off with a moist sponge. Cleaning the roof Dry cleaning X Brush from the front to the back using a soft brush. Wet cleaning X Dry clean first. X Wash down with a soft brush or sponge and lukewarm water. X Rinse with clean water. Cleaning the exterior lighting X Apply mild cleaning agent for plastic lenses and wipe off with a wet sponge. Cleaning and caring for paintwork ! Do not affix stickers to the painted sur- face. Adhesive residue could damage the paintwork. X Remove impurities immediately by rub- bing carefully. X Soak insect remains with insect remover and rinse off. X Soak bird droppings with water and rinse off. X Use tar remover to remove tar stains. X Use silicone remover to remove wax. X Remove coolant, brake fluid, tree resin, oils, fuels and greases by rubbing care- fully with a cloth soaked in petroleum ether or lighter fluid. Cleaning the vehicle interior Cleaning the displays ! For cleaning, do not use any of the fol- lowing: Ralcohol-based thinner or petrol Rabrasive cleaning agents Rcommercially-available household cleaning agents These may damage the display surface. Do not put pressure on the display sur- face when cleaning. This could lead to irreparable damage to the display. 172 Cleaning the vehicle

Maintenance and care.

X Switch off the display and let it cool

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 181 · Applies to: 453

down. X Clean the display surface with a microfi- bre cloth and cleaner for TFT or LCD dis- plays. X Dry the display surface using a dry microfibre cloth. Cleaning the steering wheel and the selector lever X Wipe off with a moist cloth, or use a leather care agent recommended for smart. Cleaning the seat belts G WARNING Seat belts may be severely weakened if bleached or coloured. This may lead to the seat belts, for example, tearing or failing in an accident. There is an increased risk of injury, possibly even fatal. Never bleach or colour seat belts. ! Do not clean the seat belts using chemi- cal cleaning agents. Do not dry the seat belts at temperatures above 80 † or in direct sunlight. X Clean the seat belts using only lukewarm soapy water. Cleaning and caring for seats Please note ! Do not use a microfibre cloth to clean covers made of genuine leather or artifi- cial leather. A microfibre cloth is too aggressive and can damage the cover when used frequently. Regular care maintains the appearance and feel of the seats over time. Cleaning and caring for genuine leather seat covers X Wet a cloth with water and clean the seat covers. Do not allow the leather to become soaked. X Wipe off with a dry cloth. X Apply a leather care agent recommended for smart. Cleaning synthetic leather seat covers X Wet a cloth with detergent water and clean the seat covers. Cleaning cloth seat covers X Wet a microfibre cloth with detergent water. X Rub cloth covers with care, cleaning entire sections of the cover. X Allow the seat to dry. Cleaning DINAMICA seat covers X Wet a cloth with water. X Clean entire sections of the cover. Cleaning the trim Cleaning the plastic trim G WARNING Care products and cleaning agents con- taining solvents can cause surfaces in the cockpit to become porous. This could result in plastic parts breaking away when the airbags are deployed. There is a danger of injury. Do not use care products and cleaning agents containing solvents to clean the cockpit. ! Never attach the following to plastic surfaces: Rstickers Rfilms Rperfume oil container or similar You could otherwise damage the plastic. To maintain the appearance of high-quality plastic surfaces, do not allow surfaces to come into contact with cosmetics, insect repellents or sun creams. Cleaning the vehicle 173

Maintenance and care. Z

X Clean the plastic trim with a damp cloth.

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 182 · Applies to: 453

X Use care products and cleaning agents recommended for smart to remove heavy soiling. Cleaning the roof lining X Remove heavy soiling using a soft brush or a cleaning agent recommended for smart. Cleaning the carpets X Use carpet and textile cleaning agents recommended for smart. Cleaning the trim elements ! Do not use solvent-based cleaning agents such as tar remover, wheel clean- ers, polishes or waxes. There is otherwise a risk of damaging the surface. X Clean the trim elements with a moist microfibre cloth. X Use care products and cleaning agents recommended for smart to remove heavy soiling. Observing service due dates The ¯ and ° indicator lamps in the instrument cluster display are reminders of upcoming service due dates: R¯: minor service. R°: major service. Monochrome display: the indicator lamp flashes for a few seconds after the engine is started. Depending on the operating condi- tions of the vehicle, the time or distance remaining until the service is due, is also displayed. The service interval is based on normal operation of the vehicle. Observe the fol- lowing if the vehicle is operated under arduous conditions or increased loads, e.g. regular city driving with frequent inter- mediate stops: X Carry out service work more often than specified by the service interval. X Check the tyres more frequently. Current information on the type of service can be obtained at a smart centre or a qualified specialist workshop. Parking up the vehicle ! Please note that if the vehicle is not used for prolonged periods, vehicle dam- age may occur and the battery may dis- charge or become damaged. X Visit a qualified specialist workshop for a consultation. 174 Parking up the vehicle

Maintenance and care.

Securing the vehicle in the event of

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 183 · Applies to: 453

an accident or a breakdown Securing the vehicle ! When a tyre is damaged, the danger area must be kept clear of all persons. X Stop the vehicle away from traffic on solid, non-slippery ground. X Switch on the hazard warning lights. X Turn the front wheels to the straight- ahead position. X Switch off the engine. X Passengers should leave the vehicle. X Secure the vehicle against rolling away. X Set up the warning triangle. In the event of a flat tyre, without TIREFIT the vehicle cannot be made roadworthy again using the on-board equipment. No emergency call can be made via the smart Audio-System. The vehicle owner and the driver of the vehicle are responsible for equipping the vehicle with an appropriate breakdown kit and seeking assistance in the event of a breakdown. Switching the hazard warning lamps on and off When the hazard warning lamps are switched on, all the turn signal lamps flash. The hazard warning lamps automatically switch on in the following cases: Ran airbag is deployed. Rthe vehicle decelerates rapidly from a speed of above 70 km/h and comes to a standstill. The hazard warning lamps switch off auto- matically if the vehicle reaches a speed of above 10 km/h again after a full brake application. X To switch on the hazard warning lamps manually: press button :. Operating the emergency assistance system Useful information For Russia only: The emergency assistance system is there to rescue you and others in an emergency. Should the driver arrive at the scene of an accident, or feel unwell, an emergency call can be initiated. The emergency call must not be deployed in the case of a breakdown or a similar, non-dangerous situation. The emergency assistance system can help to radically reduce the time between an accident and the arrival of the emergency services. The requirement is a stable mobile phone connection; network coverage can depend on the region. If there is no safety risk, in the event of an accident the vehicle occupants should remain in the vehicle after initiating an emergency call. The emergency assistance system has a separate battery. The battery only func- tions within a temperature range of -20 † to 85 †. The battery must be replaced every four years. Always have work on the bat- tery carried out at a qualified specialist workshop. Method of operation After an emergency call has been initiated, the emergency call centre will ascertain if assistance is required on location. Securing the vehicle in the event of an accident or a breakdown 175

Dealing with accidents and breakdowns.

In the event of an emergency, accident data

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 184 · Applies to: 453

is forwarded to a public emergency call

centre.

The data transferred includes:

RGPS/GLONASS position data

RDirection of travel

RTime of initiation

This allows measures for rescue, recovery

or towing away to be initiated quickly.

The emergency assistance system consists

of a loudspeaker, the control panel and the

telecommunication system. The control

panel is located in the overhead control

panel.

Automatic emergency call indicator lamp ; Microphone = SOS button ? Call and reception status indicator lamp Using test mode In test mode, the driver can check if the emergency assistance system is working. To do this, a voice message from the driver is recorded and the test result is transmit- ted to the emergency call centre. X Briefly press SOS button = several times within five seconds. X Wait for 25 seconds. X Briefly press SOS button = three times within ten seconds. A tone sounds. Microphone ; records for ten seconds. X Speak any message. A signal sounds after 25 seconds. The recorded message is played back via the loudspeaker. X If the voice message is correctly played back, press and hold SOS button = for five seconds. Indicator lamp ? flashes green slowly. or X If the voice message is incorrectly played back or not played back at all, press SOS button = three times within three sec- onds. Indicator lamp ? flashes red slowly for five seconds. Automatic emergency call Indicator lamp : shows if an automatic emergency call can be initiated. If airbags are deployed, the emergency assistance system automatically notifies an emergency centre. i The automatic emergency call is opera- tional as standard. Triggering an emergency call manually Manually initiating an emergency call as a person involved in an accident: X Press and hold SOS button = for three seconds. An emergency call is made. Manually initiating an emergency call after witnessing an accident: X Press SOS button = five times within ten seconds. The emergency call centre is informed of the accident. 176 Securing the vehicle in the event of an accident or a breakdown

Dealing with accidents and breakdowns.

Securing the vehicle against rolling

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 185 · Applies to: 453

away Securing on level ground X When changing a wheel, place chocks or other suitable items under the front and rear of the wheel that is diagonally oppo- site the wheel you wish to change. Securing on a downhill gradient X Place wheel chocks or other suitable items in front of the wheels of the front and rear axle. Using the warning triangle Removing the warning triangle Warning triangle : is located in the boot behind the seat backrest, secured to the carpet with a Velcro fastener. Return it to this location after use. X Remove warning triangle : from the boot. Setting up the warning triangle X Fold feet 3 out to the side. X Pull side reflectors 2 upwards to form a triangle. X Connect the reflectors using upper stud 1. X Place the warning triangle at a suitable distance. Securing the vehicle in the event of an accident or a breakdown 177

Dealing with accidents and breakdowns.

Using a reflective safety jacket

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 186 · Applies to: 453

Notes on reflective safety jackets

Maximum number of washes ; Maximum wash temperature = Do not bleach ? Do not iron A Do not use a tumble dryer B Do not dry-clean C This is a class 2 jacket The reflective safety jacket only meets the requirements defined by the legal standard if it is the right size and fully closed when in use. Replace the reflective safety jacket: Rif it is damaged or there is irremovable dirt on the reflective stripes Rif you exceed the maximum number of washes Rif the fluorescence has faded Removing the reflective safety jacket The reflective safety jacket is located in stowage compartment : of the front- passenger door. Reflective safety jackets can also be stored in the rear door stowage compartments. X To remove: take out the safety jacket bag containing the reflective safety jacket. X Open the safety jacket bag and take out the reflective safety jacket. X To stow: fold the reflective safety jacket, roll it up and stow it in the safety jacket bag. X Replace the safety jacket bag in stowage compartment :. Removing the first-aid kit i Check the expiry date on the first-aid kit at least once a year. Replace the con- tents if necessary, and replace any miss- ing parts. First-aid kit ; is located in the boot behind the seat backrest, secured to the carpet with a Velcro fastener. Return it to this location after use. X Remove first-aid kit ; from the boot. Removing the fire extinguisher The fire extinguisher is located underneath the front passenger seat. 178 Removing the fire extinguisher

Dealing with accidents and breakdowns.

Removing the vehicle tool tray

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 187 · Applies to: 453

The towing eye and the TIREFIT kit are located in the vehicle tool tray under the glove compartment. X Remove bolts in the front-passenger footwell. X Remove the vehicle tool tray. Sealing tyres using the TIREFIT kit Useful information The tyre sealant is pumped into the tyre. TIREFIT is a tyre sealant. TIREFIT is used to seal punctures of up to 4 mm, particularly those in the tyre tread, at outside tempera- tures down to -20 †. i The tyre inflation compressor weighs approximately 0.7 kg. At a distance of approximately 60 cm from the tyre inflation compressor, the following sound pressure level applies: RX-axis: 82.9 dB (A) RY-axis: 84.3 dB (A) RZ-axis: 84.1 dB (A) The tyre inflation compressor is mainte- nance-free. If there is a malfunction, con- tact a qualified specialist workshop. Please note G WARNING In the following situations, the tyre seal- ant is unable to provide sufficient break- down assistance, as it is unable to seal the tyre properly: Rthere are cuts or punctures in the tyre larger than those mentioned above. Rthe wheel rim is damaged. Ryou have driven at very low tyre pres- sures or on a flat tyre. There is a risk of an accident. Do not drive any further. Contact a quali- fied specialist workshop. G WARNING The tyre sealant is harmful and causes irritation. It must not come into contact with your skin, eyes or clothing or be swallowed. Do not inhale TIREFIT fumes. Keep tyre sealant away from children. There is a risk of injury. If you come into contact with the tyre sealant, observe the following: RRinse off the tyre sealant from your skin immediately with water. RIf the tyre sealant comes into contact with your eyes, immediately rinse them thoroughly with clean water. RIf tyre sealant is swallowed, immedi- ately rinse your mouth out thoroughly and drink plenty of water. Do not induce vomiting, and seek medical attention immediately. RImmediately change out of clothing which has come into contact with tyre sealant. RIf an allergic reaction occurs, seek medical attention immediately. G WARNING A tyre temporarily sealed with tyre seal- ant impairs the vehicle's driving charac- teristics and is not suitable for driving at Sealing tyres using the TIREFIT kit 179

Dealing with accidents and breakdowns. Z

higher speeds. There is a risk of an acci-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 188 · Applies to: 453

dent. Adapt your driving style accordingly and drive carefully. Do not exceed the maxi- mum permissible speed for a tyre sealed with tyre sealant. The maximum permissible speed for a tyre sealed with tyre sealant is 80 km/h. ! After use, excess tyre sealant may run out of the filler hose. This could cause stains. Therefore, place the filler hose in the plastic bag that contained the TIREFIT kit. H Environmental note Have the used tyre sealant bottle dis- posed of professionally, e.g. at a qualified specialist workshop. Comply with the manufacturer's safety instructions on the sticker on the tyre inflation compressor. Using tyre sealant X Leave foreign bodies which have pene- trated the tyre in the tyre. X Remove the vehicle tool tray. X Remove the TIREFIT kit, consisting of a tyre sealant bottle and a tyre inflation compressor, from the vehicle tool kit. X Affix the 80 km/h maximum speed sticker to the instrument cluster within the driv- er's field of vision. X Unwind plug : with the cable from tyre inflation compressor ;. X Remove hose A from the bottom section of tyre inflation compressor ;. X Unscrew the cap from tyre sealant bot- tle ?. X Connect hose A. X Remove the valve flap from valve E on the faulty tyre. X Unscrew the cap from filler hose =. X Screw filler hose = onto valve E. X Insert connector : into the cigarette lighter socket or the 12 V socket. X Turn the key to position 1 in the igni- tion lock. X Press on/off switch B on tyre inflation compressor ; to position 1. The tyre sealant is pumped into the tyre. The pressure may briefly rise to approx- imately 600 kPa (6.0 bar/87 psi) in pres- sure gauge C. i Preventing damage to the tyre inflation compressor Do not switch off the tyre inflation com- pressor during this phase. X Let the tyre inflation compressor run for a maximum of 15 minutes, then allow it to cool down. The tyre pressure must be at least 180 kPa (1.8 bar/26 psi) in pressure gauge C. Allow any leaking tyre sealant to dry. It can then be removed like a layer of film. Have any clothing stained with tyre sealant cleaned as soon as possible with perchloro- ethylene. 180 Sealing tyres using the TIREFIT kit

Dealing with accidents and breakdowns.

Further procedure if the pressure of

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 189 · Applies to: 453

the sealed tyre is below 180 kPa G WARNING If the specified tyre pressure still cannot be reached, the tyre is too badly dam- aged. The tyre sealant cannot repair the tyre in this instance. Damaged tyres and low tyre pressures can significantly impair the vehicle's braking and driving characteristics. There is a risk of an acci- dent. Do not drive any further. Contact a quali- fied specialist workshop. X Switch off the tyre inflation compressor. X Unscrew the filler hose from the valve of the defective tyre. Please note that tyre sealant may escape when unscrewing. X Slowly move the vehicle approximately 10 m forwards or backwards. X Pump up the tyre again. After a maximum of 15 minutes, the tyre pressure must be at least 180 kPa (1.8 bar/26 psi). Further procedure if the pressure of the sealed tyre is at least 180 kPa X Switch off the tyre inflation compressor. X Unscrew the hose from the valve of the defective tyre. Please note that tyre sealant may escape when unscrewing. X Stow the tyre sealant bottle and the tyre inflation compressor. X Perform a test drive. The maximum permissible speed for a tyre sealed with tyre sealant is 80 km/h. X Stop after driving for approximately 3 km and check the tyre pressure with the tyre inflation compressor. The tyre pressure must now be at least 130 kPa (1.3 bar/19 psi). The precise val- ues are located on the door pillar (B-pil- lar) on the driver's side. X If necessary, adjust the tyre pressure. X Unscrew the filler hose from the valve on the sealed tyre. Please note that tyre sealant may escape when unscrewing. X Screw the valve cap onto the valve of the sealed tyre. X Pull the tyre sealant bottle out of the tyre inflation compressor. The filler hose stays on the tyre sealant bottle. X Drive to the nearest qualified specialist workshop and have the tyre changed there. X Have the tyre sealant bottle and filler hose replaced as soon as possible at a qualified specialist workshop. Adjusting the tyre pressure Increasing the tyre pressure X Switch on the tyre inflation compressor. X Observe the display. Reducing the tyre pressure X Press button : next to pressure gauge ;. i Even unused tyre sealant loses its effectiveness over time. Have the tyre sealant bottle replaced every four years at a qualified specialist workshop. Sealing tyres using the TIREFIT kit 181

Dealing with accidents and breakdowns. Z

Towing the vehicle

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 190 · Applies to: 453

Please note G WARNING Safety relevant functions are restricted or no longer available if: Rthe ignition is switched off Rthe brake system or power steering is malfunctioning Rthere is a malfunction in the voltage supply or the vehicle's electrical sys- tem. When your vehicle is towed, you may require considerably more effort to steer and brake. There is a risk of an accident. In such cases use a rigid towing bar. Before towing away, make sure the steer- ing moves freely. G WARNING If the steering wheel lock is engaged, the vehicle can no longer be steered. There is a risk of an accident. Always switch on the ignition when tow- ing with a tow rope or a towing bar. G WARNING When towing or tow-starting another vehicle and its weight is greater than the permissible gross weight of your vehicle, the: Rtowing eye may be torn off Rcar/trailer combination may swerve or even overturn There is a risk of an accident. When towing or tow-starting another vehicle, its weight should not be greater than the permissible gross weight of your vehicle. Information on the vehicle's permissible gross weight can be found on the vehicle identification plate (Y page 213). ! Observe the following points when tow- ing with a tow rope: Rsecure the tow rope on the same side on both vehicles. Rmake sure that the tow rope is not lon- ger than legally permitted. Mark the tow rope in the middle, e.g. with a white cloth (30 x 30 cm). This makes other road users aware that a vehicle is being towed. Ronly secure the tow rope to the towing eye. Robserve the brake lamps of the towing vehicle while driving. Always maintain a distance so that the tow rope does not sag. Rdo not use steel cables or chains to tow your vehicle. You could otherwise dam- age the vehicle. ! Do not use the towing eyes for recovery purposes as this could damage the vehi- cle. If in doubt, recover the vehicle with a crane. ! When towing, pull away slowly and smoothly. If the tractive power is too high, the vehicles could be damaged. ! You may tow the vehicle for a maximum of 50 km. A towing speed of 50 km/h must not be exceeded. For towing distances over 50 km, the entire vehicle must be lifted up and transported. Observe the legal requirements for the rel- evant countries when towing. Always have the vehicle transported in the following cases: RThe warning lamp lights up and Do not tow vehicle with wheels on ground appears in the display of the instrument cluster. RThe multifunction display is not working. ROne or more of the following warning lamps is lit up: - þ drive diagnostics (red) - # 12 V battery RThe brake pedal begins to pulsate as soon as the towing procedure commences. RThe vehicle must be moved over a long distance. 182 Towing the vehicle

Dealing with accidents and breakdowns.

The transmission must be in position i

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 191 · Applies to: 453

when the vehicle is being towed. i Before the vehicle is towed, switch off the automatic locking feature. The driver could otherwise be locked out when pushing or having the vehicle towed. i Vehicles with the basic carrier fitted: Do not tow the vehicle with the basic car- rier fitted. Do not secure the tow rope or tow bar to the basic carrier. Observe the notes on the selector lever when towing the vehicle. Fitting the towing eye The towing eye can be attached to the front or rear of the vehicle. X Remove the towing eye from the vehicle tool tray. X Carefully prise off cover : on the vehi- cle. X Screw in the towing eye to the stop. Towing the vehicle with both axles on the ground X Turn the key to position 2 in the igni- tion lock. X Depress the brake pedal and keep it depressed. X Shift the automatic transmission to posi- tion i. The selector lever lock can be manually released in the event of an electrical malfunction. X Release the brake pedal. X Release the parking brake. X Switch on the hazard warning lights. Transporting the vehicle ! Only secure the vehicle by the wheels or rims, not by parts of the vehicle such as the axle or steering components. Oth- erwise the vehicle could be damaged. X Turn the key to position 2 in the igni- tion lock. Shift the transmission to posi- tion i. As soon as the vehicle is loaded: X Apply the parking brake. X Shift the transmission to position j. X Remove the key. X Lash down the vehicle. Removing the towing eye X Loosen the towing eye and unscrew it. X Attach the cover to the recess at the top and engage it at the bottom. X Stow the towing eye in the vehicle tool tray. Manually releasing the selector lever lock In cases of an electrical fault the selector lever lock can be manually deactivated, e.g. if the parking lock has been deactivated for towing and should subsequently be re- applied. Manually releasing the selector lever lock 183

Dealing with accidents and breakdowns. Z

! Do not use any sharp-edged objects to

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 192 · Applies to: 453

prise out the cover from the centre con- sole. Otherwise, the cover or the centre console could be damaged. X Apply the parking brake. X Open the drawer on the front-passenger side. X Prise out cover : on the centre console from bottom edge ; using with a flat, blunt object. X Pull cover : in the direction of the arrow. X Pull yellow release = behind the trim up and simultaneously press release but- ton ? on the selector lever. X Shift the gear selector lever to position i or j. Replacing the bulbs Please note G WARNING Bulbs, lamps and plug connectors can become very hot during use. When replacing a bulb, you could burn yourself on these components. There is a risk of injury. Allow these components to cool down before replacing the bulb. Observe the following rules when replacing bulbs: ROnly replace bulbs when the engine is switched off. RDo not use bulbs that have been dropped or show signs of visible damage, e.g. scratches. RDo not touch the glass bulb with your bare hands. ROnly use bulbs in enclosed lamps designed for that purpose. ROnly fit spare bulbs of the same type and with a specified voltage. RDo not allow bulbs to come into contact with moisture. RHave LEDs changed at qualified specialist workshops only. Change only the bulbs described below yourself in accordance with the specified bulb types. Replacing front bulbs Changing dipped-beam and main-beam headlamps X Switch off the lights. X Open the service cover. X Remove cover :. X Pull out the connector. X Press retainer ; inwards and to the left. 184 Replacing the bulbs

Dealing with accidents and breakdowns.

X Pull the bulb out.

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 193 · Applies to: 453

X Insert the new bulb.

X Lock retainer ;.

X Insert the connector.

X Replace and engage cap :.

Replacing the front turn signal lamps

X Switch off the lights.

X Turn the respective front wheel inwards.

X Push clamp : downwards.

X Remove cover ; upwards.

X Turn the bulb holder anti-clockwise and

remove it.

X Remove the bulb from the bulb holder.

X Insert the new bulb.

X Insert the bulb holder and turn it clock-

wise until it engages.

X Insert and engage cover ;.

Replacing the side turn signal lamps

X Carefully insert a flat tool into recess :.

X Prise out side turn signal ;.

X Turn the bulb holder in side turn sig-

nal ; 90° anti-clockwise and remove it.

X Remove the bulb from the bulb holder.

X Insert the new bulb into the bulb holder.

X Insert the bulb holder into side turn sig-

nal ; and turn it 90° clockwise.

X Refit side turn signal ;.

Replacing rear bulbs

Replacing the tail lamp bulbs

Tail lamps without partial LEDs

Rear/brake lamp

; Rear fog lamp

= Reversing lamp

? Turn signals

Tail lamps with partial LEDs

Turn signals ; Reversing lamp Replacing the bulbs 185

Dealing with accidents and breakdowns. Z

Removing the tail lamp cover

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 194 · Applies to: 453

X Switch off the lights.

X Open the tailgate.

X Loosen screws :.

X Remove the tail lamp.

X Carefully insert a flat tool under the

plastic hanger on the tail lamp.

X Lift the connector and remove it.

Replacing a faulty tail lamp bulb

Rear lamp/brake lamp (vehicles without partial LEDs) ; Turn signals = Reversing lamp ? Rear fog lamp (vehicles without partial LEDs) X Release four tabs A on the bulb holder. X Remove the bulb holder. X Pull the faulty bulb out. X Insert the new bulb. X Refit the bulb holder. X Insert the connector. X Insert the tail lamp until you hear it engage. X Tighten the screws on the tail lamp. Replacing the licence plate lighting X Insert a flat tool into recess :. X Remove the cover from the licence plate lamp. X Remove the bulb from the holder. X Insert the new bulb into the holder. X Insert the lamp lens into the licence plate lamp. Replacing the interior lighting X Insert a flat tool into the recess. X Prise out lamp lens :. X Remove the bulb from the holder. X Insert the new bulb into the holder. X Refit the lamp lens. Replacing fuses Please note G WARNING If you manipulate, bridge or replace a faulty fuse with a fuse of a higher amper- 186 Replacing fuses

Dealing with accidents and breakdowns.

age, the electric cables could be overloa-

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 195 · Applies to: 453

ded. This may result in a fire. There is a risk of an accident and injury. Always replace faulty fuses with speci- fied new fuses of the correct amperage. ! Only use fuses that have been approved for smart vehicles and which have the correct fuse rating for the system con- cerned. Components or systems could otherwise be damaged. ! Make sure that no moisture can enter the fuse box when the cover is open. The electrical fuses disconnect defective circuits. If a fuse blows, all the connected components and their functions will fail. Blown fuses must be replaced with fuses of the same rating, which you can recognise by the colour and fuse rating. The fuse rat- ings are listed in the fuse allocation chart (Y page 216). If new fuses blow, the cause for this must be diagnosed and rectified at a qualified specialist workshop. Preparing the vehicle to replace a fuse X Apply the parking brake. X Switch off all electrical consumers. X Turn the key to position u in the igni- tion lock and remove it. X Check whether all indicator lamps in the instrument cluster are off. Replacing a fuse (left-hand drive vehicle) ! Do not use a pointed object such as a screwdriver to open the cover in the dashboard. You could damage the dash- board or the cover. X Open the front-passenger door. X Open the glove compartment. X To open: open cover : in the direction of the arrow. X Replace the faulty fuse. X To close: insert and fold in cover : until it engages. X Close the glove compartment. Replacing a fuse (right-hand drive vehicle) X Open the driver's door. X To open: turn quick-release fastener ; by 90° using a suitable object. X Fold down cover :. X Replace the faulty fuse. X To close: close cover :. X Close quick-release fastener ;. Replacing fuses 187

Dealing with accidents and breakdowns. Z

Replacing the key battery

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 196 · Applies to: 453

G WARNING Batteries contain toxic and corrosive substances. If batteries are swallowed, it can result in severe health problems. There is a risk of fatal injury. Keep batteries out of the reach of chil- dren. If a battery is swallowed, seek med- ical attention immediately. H Environmental note Batteries contain pollu- tants. It is illegal to dis- pose of them with the household rubbish. They must be collected sepa- rately and disposed of in an environmentally responsible recycling system. Dispose of batteries in an environmentally respon- sible manner. Take dis- charged batteries to a qualified specialist work- shop or to a collection point for used batteries. X Fixed keys: unscrew screw :. X Insert a flat tool, e.g. a coin, into the recess. X Turn the tool until the cover of the bat- tery tray opens. X Replace battery ; with the positive ter- minal facing upwards. X Replace the cover on the battery tray and push it closed. X Fixed keys: screw in screw :. X Check the function of all key buttons. Open a door with the emergency release. 188 Open a door with the emergency release.

Dealing with accidents and breakdowns.

If the vehicle cannot be opened using the

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 197 · Applies to: 453

remote control key, the vehicle can be opened using the emergency release. If the driver's door is unlocked and opened with the key in the emergency release, the anti-theft alarm system will issue an alarm. To disable the alarm, switch on the ignition. X Insert the key into the emergency release on the driver's door. X Turn the key anti-clockwise. X Remove the key from the lock. X Open the door. X To disable the alarm from the anti-theft alarm system: switch on the ignition. On right-hand-drive vehicles, the emer- gency release is located on the front- passenger door. Locking the doors in an emergency Locking the doors with the locking button X Open the driver's door. X Close the other doors and the tailgate. X Press and hold button :. An audible locking and unlocking sound can be heard. Wait until the third (locking) sound, before releasing button :. When the doors are locked, indicator lamp ; lights up. X Leave the vehicle and close the driver's door. The doors, tailgate and socket cap are locked. The anti-theft alarm system is primed. X From the outside, check that the doors, tailgate and socket cap are locked. Locking the doors with the emergency locking X Insert the key into slot : on the left door. X Turn the key towards the bonnet as far as it will go to position 2. X Close the left door. X Repeat the procedure described above on the right door. X Check that the doors are locked. i If you lock the vehicle using emergency locking, the tailgate and socket cap are not locked. The anti-theft alarm system is not primed. Unlocking the tailgate with the emer- gency release ! The tailgates swing to the rear, both upwards and downwards, when opened. Therefore, make sure that there is suffi- cient clearance above, behind and below the tailgates. If the tailgate can no longer be opened from outside the vehicle, it can be opened from the inside using the emergency release. Unlocking the tailgate with the emergency release 189

Dealing with accidents and breakdowns. Z

X Fold the rear seat backrest forward.

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 198 · Applies to: 453

X Slide lever : on the tailgate to the left until the tailgate is unlocked. 190 Unlocking the tailgate with the emergency release

Dealing with accidents and breakdowns.

Notes on display messages

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 199 · Applies to: 453

The display shows warnings, malfunctions or additional information. A warning tone also sounds with some display messages. Messages from all categories can contain important information that must be observed. Have error messages checked at a Mercedes-Benz Service Centre as soon as possible. If an error message is not followed up with a repair, this can lead to damage that is not covered by the Mercedes-Benz Limited Warranty including injuries or material damage. Display messages with graphic symbols are simplified in the Owner's Manual and may differ from the symbols in the display. Colour display: low-priority display mes- sages can be hidden by pressing a on the steering wheel. High-priority messages are shown in red. The display messages are then stored in the message memory and can be called up for as long as the ignition remains switched on. Switching off the ignition clears the message memory. Locking and unlocking Problem Possible causes/consequences and M Solutions The key does not lock or unlock the vehicle. A strong source of radio waves is interfering with the signal. X Stand closer to the door lock and try to lock/unlock the vehi- cle again. Key battery is low or discharged. X Unlock the vehicle with the key in the emergency release or lock the vehicle with emergency locking. X Replace the key battery. Key is faulty. To lock: X Press the locking button and close the door within five seconds. The vehicle still will not lock. X Lock driver's door using emergency locking. X Consult a qualified specialist workshop. To unlock: X Unlock vehicle with the key in the emergency release. X Consult a qualified specialist workshop. Key is lost. X Have the key deactivated or replaced at a qualified specialist workshop. X Report loss of the key to vehicle insurer. Locking and unlocking 191

Practical advice.

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 200 · Applies to: 453

Possible causes/consequences and M Solutions A warning tone sounds. Driver's door is opened while the engine is running. Switch off the engine before leaving the vehicle: X Apply the parking brake. X Select transmission position j. X Turn the key to position u in the ignition lock and remove it. Side window will not close or will not open or close fully. Objects are obstructing the window guide. X Remove objects. Side window is not reset. G WARNING While closing the side windows, body parts in the closing area could become trapped. There is a risk of injury. When closing make sure that no parts of the body are in the closing area. If somebody becomes trapped, release the switch or press the switch to open the side window again. X Close all doors. X Turn the key to position 2 in the ignition lock. X Pull the switch for closing the window until the window is closed, and then push the switch for one second. The side window opens again a little way. X Repeat previous step until the window remains closed after releasing the switch. Folding top will not close. Folding top is obstructed during closing and reopens again slightly. X Immediately after it is obstructed, press the top part of the folding top switch again until the folding top is fully closed. Folding top is closed with increased force. C Red warning lamp lights up. If the speed exceeds 20 km/h, a warning tone also sounds. Colour display: the display shows an open door/tailgate. A door or the tailgate is open. X Pull over and stop the vehicle, paying attention to road and traffic conditions. X Close all doors and the tailgate. 192 Locking and unlocking

Practical advice.

Vision, vehicle occupants, airbag

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 201 · Applies to: 453

Problem Possible causes/consequences and M Solutions The exterior mirror is not engaged. The exterior mirror has been moved forwards or backwards by force. X Carefully move the exterior mirror to the correct position. The windscreen wip- ers do not function. The windscreen wipers are obstructed, e.g. by snow. X Pull over and stop the vehicle, paying attention to road and traffic conditions. X Remove the key from ignition lock. X Remove the cause of the obstruction. X Switch the windscreen wipers on again after 30 seconds. The windscreen wiper drive is malfunctioning. X Select another wiper speed on the combination switch. X Consult a qualified specialist workshop. The windscreen wip- ers will not stop or always wipe at the same speed. The combination switch or rain sensor is malfunctioning. X Pull over and stop the vehicle, paying attention to road and traffic conditions. X Remove the key from ignition lock. X Insert the key into the ignition lock, turn to position 1 and start the engine. X Consult a qualified specialist workshop. The red 7 warning lamp lights up for 6 seconds after starting the engine (certain countries only). A warning tone sounds. The warning lamp prompts the driver and front passenger to fasten their seat belts. X Fasten the seat belts. The red 7 warning lamp lights up after starting the engine. The driver or front passenger has not fastened their seat belt. X Fasten the seat belts. The red 7 warning lamp flashes. A warning tone sounds. The driver or front passenger has not fastened their seat belt and the vehicle is travelling faster than 20 km/h. X Fasten the seat belts. Vision, vehicle occupants, airbag 193

Practical advice. Z

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 202 · Applies to: 453

Possible causes/consequences and M Solutions The red 6 warning lamp lights up while the engine is running. Colour display: Mal‐ function Visit workshop appears. The restraint system is malfunctioning. G WARNING If the restraint system is malfunctioning, restraint system components may be triggered unintentionally or might not be triggered as intended in the event of an accident. This may apply to belt tensioners or airbags, for example. There is a risk of injury. Have the restraint system checked and repaired immediately at a qualified specialist workshop. The 4 indicator lamp on the overhead control panel lights up. The front-passenger front airbag has been disabled (Y page 43). X Enable the front-passenger front airbag. The front-passenger front airbag has not been disabled and is malfunctioning. X Do not use a rearward-facing child restraint system on the front-passenger seat. X Do not allow passengers to travel on the front-passenger seat. X Consult a qualified specialist workshop. The × indicator lamp on the overhead control panel lights up. The front-passenger front airbag is enabled (Y page 43). The airbag system is operating correctly. X Do not use a rearward-facing child restraint system on the front-passenger seat. The × indicator lamp on the overhead control panel does not light up if the front- passenger front airbag has been enabled manually. There is a malfunction in the airbag system. X Do not allow passengers to travel on the front-passenger seat. X Consult a qualified specialist workshop. 194 Vision, vehicle occupants, airbag

Practical advice.

Engine, brakes, transmission

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 203 · Applies to: 453

Problem Possible causes/consequences and M Solutions The engine will not start using the key. The steering lock is manually locked. X Remove the key from the ignition lock and then reinsert it into the ignition lock. X Turn the key. X Turn the steering wheel left and right. The engine will not start. The ignition is not being actuated long enough. X Hold the key for longer in position 3 (Y page 69). The red þ warning lamp lights up. A warning tone sounds. Without starting motor again, visit workshop appears. There is a serious malfunction in the high-voltage electrical system. The engine can no longer be started. X Do not restart the engine. X Consult a qualified specialist workshop. The red þ warning lamp lights up. Stop Switch off motor appears. The high-voltage electrical system, engine or high-voltage battery is malfunctioning. X Switch off the engine. X Do not drive on. X Consult a qualified specialist workshop. X Do not tow away the vehicle on its own wheels. The red þ warning lamp lights up. A warning tone sounds. Stop appears. Communication with the engine's control unit is malfunction- ing. X Switch off the engine. X Do not drive on. X Consult a qualified specialist workshop. X Do not tow away the vehicle on its own wheels. The yellow þ warning lamp lights up. A warning tone sounds. Malfunction Visit workshop appears. There is a malfunction in the high-voltage electrical system. The vehicle's high-voltage electrical system may become dam- aged if you continue running the engine. X Switch off the engine. X Do not drive on. X Consult a qualified specialist workshop. X Do not tow away the vehicle on its own wheels. The red þ warning lamp lights up. A warning tone sounds. Reduce speed appears. The speed of the vehicle is above 135 km/h. X Reduce the speed to below 135 km/h. Engine, brakes, transmission 195

Practical advice. Z

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 204 · Applies to: 453

Possible causes/consequences and M Solutions lights up. Do not tow vehicle with wheels on ground appears. The drive system or high-voltage electrical system is faulty. X Have the vehicle transported by a qualified specialist work- shop. X Do not tow away the vehicle on its own wheels. The red J warning lamp lights up while the engine is running. A warning tone sounds. Colour display: Check brake fluid level appears. Brake fluid level is too low. G WARNING If the brake fluid level is too low the brake system may fail. There is a risk of an accident. Stop the vehicle in accordance with the traffic conditions. Secure the vehicle by applying the parking brake. Do not drive any further. Consult a qualified specialist workshop immediately and have the brake system repaired. Do not top up the brake fluid, as this will not rectify the fault. X Consult a qualified specialist workshop. The red J warning lamp lights up while driving. A warning tone sounds. Colour display: Release parking brake appears. The parking brake is applied. X Release the parking brake. The red J warning lamp lights up while the engine is running. A warning tone sounds. Colour display: Brake system malfunction Stop appears. There is a serious malfunction in the brake system. X Consult a qualified specialist workshop. The yellow J warning lamp lights up. Colour display: Mal‐ function Visit workshop appears. There is a malfunction in the vacuum supply of the brake sys- tem. X Consult a qualified specialist workshop. 196 Engine, brakes, transmission

Practical advice.

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 205 · Applies to: 453

Possible causes/consequences and M Solutions Monochrome display: i or j flash alter- nately in the middle of the display. Colour display: To start engine: shift to P or N appears. An attempt was made to start the engine with the transmission in position h or k. X Shift to j or i to start. Monochrome display: j or h/k, i flash alternately. A warning tone sounds. Colour display: Risk of vehicle rolling away Transmission not in P appears. A warning tone sounds. The driver's door is open and the selector lever is in position k, i or h. G WARNING The vehicle may roll away. There is a risk of an accident. X Shift to position j. X Switch off the engine. X Close the driver's door completely. ¯ or ° warning lamp flashes for a few seconds after starting the engine. Colour display: Next service due in … km or Service due … days ago appears. A service due date is approaching or has already passed: R¯ indicates a minor service. R° indicates a full service. X Consult a qualified specialist workshop. Charging process Problem Possible causes/consequences and M Solutions The charge socket flap cannot be opened. The charge socket flap is not unlocked. X Press the # button on the key. The key batteries are discharged. X Open a door with the emergency release. The charging cable cannot be plugged into the vehicle socket. The vehicle socket is locked. X Make sure that the selector lever is in position j. Charging process 197

Practical advice. Z

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 206 · Applies to: 453

Possible causes/consequences and M Solutions The indicator lamp on the vehicle socket flashes red. The high- voltage battery is not being charged. A fault occurred while initialising the charging process. X Make sure that the charging cable is plugged into the mains socket. X Disconnect the charging cable connector from the vehicle socket and plug it back into the vehicle socket after 30 seconds. X If the malfunction should persist, inform a qualified special- ist workshop. The indicator lamp on the vehicle socket remains off after the charging cable con- nector has been con- nected to the vehicle socket. When charging using a mains socket, the high-voltage bat- tery is not charged. There is a malfunction at the mains socket. X Have the mains socket checked to ensure that it is working correctly. or X Use a different mains socket. è lights up. A warning tone sounds. Charger cable con‐ nected appears. The charging cable is plugged into the vehicle socket. The engine cannot be started. X Before driving off, disconnect the charging cable from the vehicle socket and stow it away in the vehicle. è flashes. Charging cable not inserted correctly appears. The charging cable is connected to the vehicle socket. The bat- tery is not being charged. X Make sure that the charging cable is correctly plugged into the sockets on the vehicle and power connection. If neces- sary, disconnect the charging cable from the sockets and then reconnect it. If the message continues to be displayed: X Consult a qualified specialist workshop. The charging cable connector cannot be removed from the vehicle socket. The charging cable connector is not unlocked. X Press the # button on the key. This unlocks the charging cable connector in the vehicle socket. X Remove the charging cable connector from the vehicle socket. 198 Charging process

Practical advice.

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 207 · Applies to: 453

Possible causes/consequences and M Solutions Charging not possi‐ ble Power supply interrupted appears. The high-voltage battery cannot be charged. The charge cur- rent was interrupted during the charging process. X Make sure that the charging cable is plugged into the mains socket. X Disconnect the charging cable connector from the vehicle socket and plug it back into the vehicle socket after 30 seconds. If the message continues to be displayed: X Consult a qualified specialist workshop. Charging not possi‐ ble s. Owner's Man‐ ual appears. Communication with the charging point infrastructure is not functioning correctly. X Make sure that the charging cable is correctly plugged into the sockets on the vehicle and power connection. If neces- sary, disconnect the charging cable from the sockets and then reconnect it. If the message continues to be displayed: X Use a different charging station. If the message continues to be displayed: X Consult a qualified specialist workshop. The yellow þ warning lamp lights up. Charging not possi‐ ble Visit workshop appears. The vehicle electronics are malfunctioning. The high-voltage battery cannot be charged. X Consult a qualified specialist workshop. The yellow þ warning lamp lights up. Charging not possi‐ ble s. Owner's Man‐ ual appears. The high-voltage battery cannot be charged. The charging cable connector is overheated. X Remove the charging cable connector from the vehicle socket. X Allow the charging cable connector to cool off for several minutes. X Plug the charging cable back into the vehicle socket. If the message continues to be displayed: X Consult a qualified specialist workshop. The indicator lamp on the vehicle socket does not light up. The high-voltage battery is not being charged. The vehicle is inactive. X Activate the vehicle by pressing the # button on the key and lock it again. The charging cable cannot be removed. The vehicle is in charging mode or has completed active charg- ing. X Unlock the charging lock by pressing the # button on the key. Charging process 199

Practical advice. Z

Driving safety systems

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 208 · Applies to: 453

Problem Possible causes/consequences and M Solutions ! Yellow warning lamp lights up. Colour display: Sys‐ tem inoperative appears. ABS is malfunctioning. Other driving systems may be deactiva- ted. If ABS is faulty, there is also a possibility that other driving systems may be unavailable. Observe the information on the ABS warning lamp and display messages which may be shown in the instrument cluster. G WARNING If ABS is faulty, the wheels could lock when braking. The steerability and braking characteristics may be severely impaired. Additionally, further driving safety systems are deactivated. There is an increased danger of skidding and accidents. Drive on carefully. Have ABS checked immediately at a quali- fied specialist workshop. When ABS is malfunctioning, other systems, including driving safety systems, will also become inoperative. Observe the information on the ABS warning lamp and display messages which may be shown in the instrument cluster. X Pull over and stop the vehicle, paying attention to road and traffic conditions. X Secure the vehicle against rolling away. X Consult a qualified specialist workshop. J Red warning lamp lights up while the engine is running. A warning tone sounds. Colour display: Brake force distribution inoperative Stop See Owner's Manual appears. EBD is malfunctioning. This means that ABS, ESP®, Crosswind Assist and Hill Start Assist are also unavailable. Other driving systems may be deactivated. G WARNING The brake system continues to function normally, but without the functions listed above. The wheels could therefore lock early if you brake hard, for example. The steerability and braking characteristics may be severely affected. The braking distance may increase in emergency braking situations. If ESP® is not operational, the vehicle will not be stabilised by ESP®. The danger of skidding and having an accident increases. X Pull over and stop the vehicle, paying attention to road and traffic conditions. X Secure the vehicle against rolling away. X Consult a qualified specialist workshop. 200 Driving safety systems

Practical advice.

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 209 · Applies to: 453

Possible causes/consequences and M Solutions ÷ Monochrome dis- play: yellow warning lamp lights up while the engine is running. ÷ Colour display: yellow warning lamp lights up. System inoperative appears. ESP® is not available due to a malfunction. Other driving sys- tems may be deactivated. G WARNING If ESP® is malfunctioning, ESP® is unable to stabilise the vehicle. In addition, other driving safety systems are switched off. This increases the risk of skidding and an acci- dent. Drive on carefully. Have ESP® checked at a qualified special- ist workshop. Brake lamps may be inoperative and thus no longer working when braking. X Pull over and stop the vehicle, paying attention to road and traffic conditions. Do not drive on. X Check that the brake lamps are working. The brake lamps are not working. X Consult a qualified specialist workshop. The brake lamps are working. X Drive on carefully. X Consult a qualified specialist workshop. ÷ Colour display: yellow warning lamp lights up. Brake Assist Sys‐ tem (BAS) inopera‐ tive appears. The Brake Assist System (BAS) is inoperative. X Consult a qualified specialist workshop. ÷ Yellow warning lamp flashes while driving. ESP® is intervening because there is a risk of skidding or at least one of the wheels is spinning. X Pull away carefully. X Accelerate carefully whilst driving. X Adapt your driving style to suit the road and weather condi- tions. ÷ and C and other warning lamps are lit. Colour display: Elec‐ tronics malfunc‐ tion Visit workshop appears. The central vehicle electronics system is malfunctioning. After switching off the engine, it is no longer possible to lock or unlock the doors using the remote control on the key or to start the engine. X Pull over and stop the vehicle, paying attention to road and traffic conditions. X Consult a qualified specialist workshop. Driving safety systems 201

Practical advice. Z

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 210 · Applies to: 453

Possible causes/consequences and M Solutions Colour display: ÷ Hill start assist inoperative appears. Hill start assist is malfunctioning. Vehicle will not be held automatically when pulling away uphill and may start rolling immediately. G WARNING If ESP® is malfunctioning, ESP® is unable to stabilise the vehicle. In addition, other driving safety systems are switched off. This increases the risk of skidding and an acci- dent. Drive on carefully. Have ESP® checked at a qualified special- ist workshop. Other driving systems may be deactivated. The brake system functions normally, but without hill start assist. X Drive on carefully. X Consult a qualified specialist workshop. h Yellow warning lamp lights up while driving. Colour display: Cor‐ rect tyre pressure appears. The tyre pressure is too low in at least one of the tyres, or the tyre pressure difference between the wheels is too great. X Check tyre pressure. X Correct the tyre pressure. X Restart tyre pressure monitor. 202 Driving safety systems

Practical advice.

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 211 · Applies to: 453

Possible causes/consequences and M Solutions h Yellow warning lamp lights up while driving. Colour display: Tyre pressure Caution tyre malfunction appears. The tyre pressure monitor has detected a significant loss of pressure in at least one of the tyres. G WARNING Underinflated or overinflated tyres pose the following risks: Rthe tyres may burst, especially as the load and vehicle speed increase. Rthe tyres may wear excessively and/or unevenly, which may greatly impair tyre traction. Rthe driving characteristics, as well as steering and brak- ing, may be greatly impaired. There is a risk of an accident. Observe the recommended tyre pressure and check the tyre pressure of all the tyres: Rat least every two weeks Rwhen the load changes Rbefore embarking on a longer journey Rfor changed operating conditions, e.g. off-road driving If necessary, correct the tyre pressure. X Secure the vehicle against rolling away. X Check tyres visually and, if necessary, follow the instructions for flat tyres. X Check the tyre pressure and correct it if necessary. h Yellow warning lamp flashes for approximately one minute and then stays lit. Colour display: Tyre pressure monitor inoperative appears. The tyre pressure monitor is malfunctioning or was not restar- ted after a wheel change. G WARNING If you correct the tyre pressure without recalibrating the Run Flat Indicator, the system cannot issue a warning about a defective tyre in time. In the event of tyre pressure loss, the driving characteristics and the steering and braking may be greatly impaired. There is a risk of an accident. If you correct the tyre pressure, you must recalibrate the Run Flat Indicator. X Restart tyre pressure monitor. The display message continues to be displayed. X Drive on carefully. X Consult a qualified specialist workshop. Driving safety systems 203

Practical advice. Z

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 212 · Applies to: 453

Possible causes/consequences and M Solutions h Yellow warning lamp flashes for approximately 60 seconds and then remains lit. Colour display: Tyre pressure monitor inoperative wheel sensors missing appears. There is no signal from the tyre pressure sensor of one or more wheels. G WARNING Risk of accident due to undetected tyre pressure losses. The system is possibly unable to recognise or register low tyre pressure. X Consult a qualified specialist workshop. Wheels have unsuitable tyre pressure sensors. X Fit wheels with suitable tyre pressure sensors. J Red warning lamp lights up. ÷, ! yellow warning lamps light up while the engine is running. A warning tone sounds. Colour display: Elec‐ tronics malfunc‐ tion Stop See Own‐ er's Manual appears. The following systems are malfunctioning: RABS (anti-lock braking system) RESP® (Electronic Stability Program) RCrosswind Assist RHill start assist Further driving systems could be switched off automatically. G WARNING The risk of skidding and having an accident increases due to malfunctioning driving safety systems. The brake system functions normally, but without the systems listed. The wheels could therefore lock if you brake hard, for example. This will greatly impair the ability to steer and brake. The braking distance may increase in emergency braking situa- tions. X Pull over and stop the vehicle, paying attention to road and traffic conditions. X Consult a qualified specialist workshop. 204 Driving safety systems

Practical advice.

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 213 · Applies to: 453

Possible causes/consequences and M Solutions Monochrome display: D yellow warning lamp lights up while the engine is running. Power assistance may be malfunctioning, making steering dif- ficult. G WARNING You will need to use more force to steer. There is a risk of an accident. X Check whether you are able to apply the extra force required. If you are able to steer safely: X Drive on carefully. X Visit a qualified specialist workshop immediately. If you are unable to steer safely: X Do not drive on. X Consult a qualified specialist workshop. D Yellow warning lamp lights up while the engine is running. Colour display: Steer‐ ing malfunction See Owner's Manual or Electronics mal‐ function See Own‐ er's Manual appears. Power assistance may be malfunctioning, making steering dif- ficult. G WARNING You will need to use more force to steer. There is a risk of an accident. X Check whether you are able to apply the extra force required. If you are able to steer safely: X Drive on carefully. X Visit a qualified specialist workshop immediately. If you are unable to steer safely: X Do not drive on. X Consult a qualified specialist workshop. Driver assistance systems Problem Possible causes/consequences and M Solutions The red · warning lamp is lit. A warning tone sounds. The collision warning detects obstacles on the road. X Pay careful attention to the road and traffic conditions and be ready to brake. The red · warning lamp is lit. The distance to the vehicle in front is too short for the current speed. X Increase the distance. The yellow ^ warning lamp lights up while driving. The sensors in the radiator trim are dirty. X Clean the sensors. Driver assistance systems 205

Practical advice. Z

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 214 · Applies to: 453

Possible causes/consequences and M Solutions Colour display: Active Brake Assist inoperative or Electronics mal‐ function Visit workshop appears. Environmental influences or error sources outside the system are temporarily interfering with Active Brake Assist and radar- assisted recuperation. Possible causes: Rheavy rain or snow Roperating temperature is too high Ron-board voltage is too low Active Brake Assist is automatically operational again when the causes listed no longer apply. Warning lamp remains lit: X Pull over and stop the vehicle, paying attention to road and traffic conditions. X Clean the sensors. X Restart the engine. Warning lamp still remains lit: X Consult a qualified specialist workshop. ^ and C as well as other warning lamps are lit. The central vehicle electronics system is malfunctioning. After switching off the engine, it is no longer possible to lock or unlock the doors using the remote control on the key or to start the engine. X Pull over and stop the vehicle, paying attention to road and traffic conditions. X Consult a qualified specialist workshop. Ã flashes for approximately three seconds. A warning tone sounds. Colour display: Lane Keeping Assist inoperative appears. The windscreen is dirty in the camera's field of vision. X Pull over and stop the vehicle, paying attention to road and traffic conditions. X Clean the windscreen. Environmental influences are interfering with Lane Keeping Assist. Possible causes: Rheavy rain or snow or thick fog is impairing visibility Rthe sun is low in the sky and shining directly onto the sensor Rlane markings cannot be detected Lane Keeping Assist is automatically operational again when the causes listed no longer apply. If the windscreen is clean and the causes listed do not apply, then the electronics are malfunctioning. The system electronics are faulty. X Consult a qualified specialist workshop. 206 Driver assistance systems

Practical advice.

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 215 · Applies to: 453

Possible causes/consequences and M Solutions ¤ flashes for a maximum of five sec- onds. Colour display: the green à warning lamp flashes for a maximum of five sec- onds. A warning tone sounds. A lane boundary marking was crossed without using the turn signal. X Stay inside the lane boundary markings. X Use the turn signal before changing lanes. ¯ flashes for approximately ten seconds. A warning tone sounds. Colour display: ¯ Cruise control inoperative appears. Cruise control is malfunctioning and deactivates automatically. X Consult a qualified specialist workshop. ¯ flashes for approximately ten seconds. C and other warning lamps are also lit. A warning tone sounds. Colour display: Elec‐ tronics malfunc‐ tion Visit workshop appears. The central vehicle electronics system and cruise control are malfunctioning. After switching off the engine, it is no longer possible to lock or unlock the doors using the remote control on the key or to start the engine. X Pull over and stop the vehicle immediately, paying attention to road and traffic conditions. X Consult a qualified specialist workshop. È lights up. The speed display flashes. A warning tone sounds. The vehicle is exceeding the set limit speed. X Brake the vehicle, paying attention to road and traffic condi- tions. Driver assistance systems 207

Practical advice. Z

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 216 · Applies to: 453

Possible causes/consequences and M Solutions È flashes for approximately ten seconds. A warning tone sounds. Colour display: Lim‐ iter inoperative appears. The speed limiter is malfunctioning and deactivates automati- cally. X Consult a qualified specialist workshop. The Ò warning lamp flashes for a minute or lights up continuously. Colour display: Black ice warning appears. The outside temperature has fallen to or below 3 °C. There is a risk of black ice. X Adapt your driving style and speed to suit the weather con- ditions. Battery, lights, heating Problem Possible causes/consequences and M Solutions Rear window heating or seat heating switches off automati- cally or cannot be switched on. Battery is not sufficiently charged. X Switch off electrical consumers that are not required. Ý Yellow warning lamp lights up. Battery reserve level appears. The charge status of the high-voltage battery has dropped into the reserve range. X Charge the high-voltage battery. Monochrome display: Ý Yellow warning lamp flashes. Colour display: Ý Yellow warning lamp lights up. Battery reserve level appears. The charge status of the high-voltage battery is below 10%. X Charge the high-voltage battery. õ Display flashes. The vehicle has switched itself off. Battery charge too low Charge HV bat‐ tery now appears. The vehicle has switched itself off because the charge status of the high-voltage battery is too low. After restarting the vehicle, depending on the charge status of the high-voltage battery, the vehicle can only drive on a maximum of 1 km. X Park the vehicle paying attention to road and traffic condi- tions. X Charge the high-voltage battery. 208 Battery, lights, heating

Practical advice.

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 217 · Applies to: 453

Possible causes/consequences and M Solutions

Red warning

lamp lights up when driving or when the vehicle is ready to start. A warning tone sounds. Colour display: Stop See Owner's Manual appears. 12 V battery is not being charged or the high-voltage battery is malfunctioning. X Do not drive on. The engine may switch itself off after a short while. X Pull over and stop the vehicle, paying attention to road and traffic conditions. X Switch off the engine. X Consult a qualified specialist workshop. It may not be possible to drive the vehicle further and it may not be possible to restart the engine. Colour display: # Warning lamp lights up. Malfunction Visit workshop appears. Battery monitoring is malfunctioning. X Consult a qualified specialist workshop. Monochrome display: b Warning lamp lights up. Dipped beam is on continuously. Main beam cannot be activa- ted. X Switch off the engine. X Start the engine. Warning lamp remains lit: Brake lamps are inoperative. The bulb or LED is faulty. G WARNING Risk of accident due to faulty brake lamps. The brake lamps are faulty and no longer alert other road users when braking. X Pull over and stop the vehicle, paying attention to road and traffic conditions. X Consult a qualified specialist workshop. Warning lamp still remains lit: Rain/light sensor is malfunctioning. X Manually adjust exterior lighting. X Manually adjust windscreen wipers. X Consult a qualified specialist workshop. Colour display: b Warning lamp lights up. Malfunction See Owner's Manual appears. Dipped beam is on continuously. Main beam cannot be activa- ted. X Switch off the engine. X Restart the engine. Battery, lights, heating 209

Practical advice. Z

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 218 · Applies to: 453

Possible causes/consequences and M Solutions Warning lamp remains lit: Rain/light sensor is malfunctioning. X Manually adjust exterior lighting. X Manually adjust windscreen wipers. X Consult a qualified specialist workshop. Colour display: b Warning lamp lights up. Brake lamps inoper‐ ative appears. Brake lamps are inoperative. The bulb or LED is faulty. G WARNING Risk of accident due to faulty brake lamps. The brake lamps are faulty and no longer alert other road users when braking. X Pull over and stop the vehicle, paying attention to road and traffic conditions. X Consult a qualified specialist workshop. Colour display: Switch off lights appears. A warning tone sounds. Lights are still switched on when you leave the vehicle. X Turn control knob for the lights to à or u. smart Audio-System and smart Media-System Bluetooth® connection Problem Possible causes/consequences and M Solutions A Bluetooth® connec- tion cannot be estab- lished between the smart Audio-System or smart Media-Sys- tem and mobile phone. X Ascertain whether the mobile phone is compatible with the system. Information about compatible mobile phones: http:// www.smart.com/connect X Check the security settings on your mobile phone. X Check that the Bluetooth® function is enabled on the smart Audio-System or smart Media-system and on your mobile phone. X Start the device search on the smart Audio-System or smart Media-System and on the mobile phone. 210 smart Audio-System and smart Media-System

Practical advice.

Navigation system in the smart Media-System

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 219 · Applies to: 453

Problem Possible causes/consequences and M Solutions No map is displayed in the navigation sys- tem. The SD card with the map data is missing or damaged. X Check to see that the SD card is inserted. The position of the vehicle in the naviga- tion system does not match the vehicle's actual position. The GPS symbol on the display is grey or yel- low. GPS reception is poor. X Drive the vehicle to another position where GPS reception is better. The road's course in the navigation system no longer coincides with the actual road. The map data is out of date. X Update the map data. The navigation system does not display any traffic information. Route guidance has not been started. X Select a destination and start navigation. HD Traffic is not available or the subscription for HD Traffic has expired. X Check whether HD Traffic is available for the country you are in or upgrade the subscription for HD Traffic. There are no naviga- tion messages during route guidance. The road's course is not detected. The map data may be out of date. X Check if route guidance has started. X If not, select a destination and start navigation. Navigation messages are switched off. X Switch on navigation messages. Voice control system in the smart Media-System Problem Possible causes/consequences and M Solutions The voice control sys- tem does not under- stand voice com- mands. The interval for entering voice commands has been exceeded. X Press the button on the multifunction steering wheel. Voice commands have not been given from the driver's seat. X Issue voice commands from the driver's seat. Noise from the blower or wind noise are interfering with voice commands. X Avoid interfering noises. smart Audio-System and smart Media-System 211

Practical advice. Z

Problem

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 220 · Applies to: 453

Possible causes/consequences and M Solutions Voice commands have not been given clearly. X Speak clearly when giving voice commands. A voice command is unknown. X Enter voice command "Help". A list of possible voice commands appears. 212 smart Audio-System and smart Media-System

Practical advice.

Obtaining technical data

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 221 · Applies to: 453

Information on technical data: http://

www.smart.de

The technical data was determined in

accordance with EU Directives. All data

applies to the vehicle's standard equip-

ment. Differences will be present in the

case of vehicles with optional equipment.

Further information is available from any

smart Centre.

Reading vehicle data

Useful information

Please observe the following notes for the

specified vehicle data:

RItems of optional equipment reduce the

maximum payload

RVehicle-specific weight information can

be found on the vehicle identification

plate.

RFor certain countries only: you can find

vehicle-specific vehicle data in the COC

(CERTIFICATE OF CONFORMITY) docu-

ments. These documents are delivered

with your vehicle.

Vehicle identification plate

Vehicle identification plate position

Vehicle identification plate ; Vehicle manufacturer = EU type approval number ? Vehicle identification number (VIN) A Maximum permissible gross weight B Maximum permissible gross weight of the vehicle combination C Maximum permissible front axle load D Maximum permissible rear axle load E Paint code i The data shown on the vehicle identifi- cation plate is example data. This data is different for every vehicle and can devi- ate from the data shown here. The data applicable to the vehicle is found on the vehicle's identification plate. Vehicle identification number (VIN) X Slide the right-hand front seat to its rearmost position. X Fold floor covering : upwards. VIN ; is located there. The VIN can also be found on the vehicle identification plate. Reading vehicle data 213

Technical data.

Dimensions and weights

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 222 · Applies to: 453

The heights specified may vary as a result of the following factors: Rtyres Rload Rcondition of the suspension Roptional equipment smart EQ forfour Dimensions and weights Opening height : 2012 mm Vehicle length 3495 mm Vehicle width including exterior mirrors 1875 mm Vehicle width excluding exterior mirrors 1665 mm Vehicle width excluding exterior mirrors for vehicles equipped with wheel trims 1667 mm Vehicle height 1554 mm Wheelbase 2494 mm Maximum ground clear- ance 109 mm Permissible roof load 0 kg smart forfour edition crosstown Dimensions and weights Opening height : 2012 mm Vehicle length 3512 mm smart forfour edition crosstown Dimensions and weights Vehicle width including exterior mirrors 1875 mm Vehicle width excluding exterior mirrors 1665 mm Vehicle width excluding exterior mirrors for vehicles equipped with wheel trims 1667 mm Vehicle height 1554 mm Wheelbase 2494 mm Maximum ground clear- ance 109 mm Permissible roof load 0 kg Charging time i The options listed for charging a high- voltage battery are not available in all countries. High-voltage battery Type Lithium-ion Vehicles with a 7 kW/ 4.6 kW on-board charger Charging time (from 10% to 80%) at 32 A/230 V Approx. 2 h Charging time (from 10% to 80%) at 20 A/230 V Approx. 3 h 30 min Charging time (from 10% to 80%) at 10 A/230 V Approx. 6 h 214 Reading vehicle data

Technical data.

High-voltage battery

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 223 · Applies to: 453

Charging time (from 10% to 80%) at 8 A/230 V Approx. 9 h 30 min Vehicles with a 22 kW on-board charger Charging time (from 10% to 80%) at 3x32 A/230 V Approx. 40 min Charging cable Charging the battery at a charging station or wall box Nominal voltage max. 400 V AC, max. 3-phase Nominal frequency 50 Hz/60 Hz Nominal current max. 32 A Charge output from 4.6 kW to 22 kW System of protection IP44 (inserted), IP24 (not inserted) Outside temperature Observe the notes on maintaining the high- voltage bat- tery(Y page 83) -40 † to +50 † Standards IEC 61851-1, IEC 62196-1, IEC 62186-2 Interface Type 2 to Type 2 Also observe the identification plate on the charging cable connector. Service products Please note Also observe the information in the section "Checking and refilling service products" (Y page 160). Vehicle components and their respective service products must match. Therefore, only use products tested and approved by Mercedes-Benz. Information on service products The following table lists all technical data for the service products of the vehicle. Fur- ther information on service products: http://bevo.mercedes-benz.com and in any smart Centre. Service prod- ucts Specifications Corrosion inhibitor/ antifreeze (Y page 160) 325.6, 326.6 MB-Freigabe or MB- Approval is stated on the corrosion inhibitor/anti- freeze containers. Windscreen washer fluid (Y page 161) Temperatures above freezing point: mixing ratio of 1:100 MB SummerFit to water. Temperatures below freezing point: for the correct mixing ratio of MB WinterFit and water, please observe the infor- mation on the antifreeze container. Bulb types The following table lists the correct bulb types of the vehicle: Bulb Type Dipped-beam/main-beam headlamps H4 60/55 W Front foglamps H 16 Turn signals PY 21 W Side turn signal lamps WY 5 W Licence plate lighting W 5 W Interior lighting W 5 W Bulb types 215

Technical data.

Tail lamps

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 224 · Applies to: 453

Bulb Type Tail lamp and brake lamp P21 5 W Rear foglamp P21 W Bulb Type Reversing lamp W 16 W Turn signals PY 21 W Fuse allocation No. Consumer Current Colour cod- ing 1 Starter motor 5 A Brown 2 Power steering control unit 5 A Brown 3 Multifunction lever 5 A Brown 4 Airbag 5 A Brown 5 ‑ ‑ ‑ 6 Instrument cluster 10 A Red 7 Horn, alarm system 15 A Blue 8 Power supply control unit 10 A Red 9 Power supply control unit 10 A Red 10 Central control unit 20 A Yellow 11 Central control unit 15 A Blue 12 Central control unit 10 A Red 13 Central control unit 15 A Blue 216 Fuse allocation

Technical data.

Consumer

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 225 · Applies to: 453

No. Consumer Current Colour cod- ing 14 Power window switch (without reversing func- tion) 30 A Green 15 ESP®, transmission control unit 5 A Brown 16 Interior lighting 10 A Red 17 Immobiliser 3 A Violet 18 Electrical exterior mirror 5 A Brown 19 Brake lamps 10 A Red 20 Cruise control, radio, belt warning 15 A Blue 21 Not for smart EQ fortwo, smart EQ fortwo cabrio, smart EQ forfour: central control unit, fuel pump, ignition system 15 A Blue 22 Rear window wiper 15 A Blue 23 Starter motor smart EQ fortwo, smart EQ fortwo cabrio, smart EQ forfour only: power supply control unit 40 A Orange 24 ‑ ‑ ‑ 25 Power supply control unit 30 A Green 26 Radio 20 A Yellow 27 Daytime driving lamps 5 A Brown 28 12 V socket, cigarette lighter 15 A Blue 29 Power supply control unit 5 A Brown 30 Forward collision warning 15 A Blue 31 ‑ ‑ ‑ 32 Radio, central control unit 15 A Blue 33 Tail lamps, front foglamps, hazard warning lamp button, locking button, headlamp range control, power windows, licence plate lighting, radio, control unit for heating or climate control system, cruise control, limiter, parking aid but- ton, program selector button, tailgate release, Lane Keeping Assist camera, automatic start/ stop system button 25 A Cyan 34 Power supply control unit 25 A Cyan 35 Headlamps, daytime driving lamps 25 A Cyan 36 - 40 ‑ ‑ ‑ 41 smart EQ forfour only: seat heating in the rear 15 A Blue Fuse allocation 217

Technical data.

Consumer

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 226 · Applies to: 453

No. Consumer Current Colour cod- ing 42 smart EQ fortwo, smart EQ fortwo cabrio, smart EQ forfour only: seat heating in the front 25 A Cyan 43 Mirror heating 5 A Brown 44 Power windows (automatic reversing feature) 25 A Cyan 45 Transmission control unit smart EQ fortwo, smart EQ fortwo cabrio, smart EQ forfour only: EV control unit 5 A Brown 46 Radio amplifier 20 A Yellow 47 ‑ ‑ ‑ 48 smart EQ fortwo, smart EQ fortwo cabrio, smart EQ forfour only: vacuum pump 10 A Red 49 smart EQ fortwo, smart EQ fortwo cabrio, smart EQ forfour only: heating control unit, air-condi- tioning 10 A Red Radio type approvals for the tyre pressure monitors Country Radio type approval number Argen- tina MW2433A H-12337 GG4 H-12338 Brazil 2770-12-8001 Model: MW2433A 0381-13-8001 Model: GG4 Abu Dhabi Dubai TRA, Registered-NO ER0092100/12 TRA, Registered-NO ER0099792/12 TRA, Registered-NO ER0076990/11 Dealer-NO: DA0047074/10 Country Radio type approval number Jordan Model: Gen Alpha Wal 2 TPMS transmitter Type Approval Number: TRC/LPD/2012/114 Model: Gen Gamma Gen 4 433.92 MHz. Type Approval Number: TRC/LPD/2012/190 Model: Corax 3 MRXMC34MA4 Type Approval Number: TRC/LPD/2011/158 Type Number: LPD Morocco MR7319 ANRT 2012/ 11/07/2012 MR7672 ANRT 2012/ 23/11/2012 MR6706 ANRT 2011 Moldova 1024 Philip- pines No: ESD-1206394C No: ESD-1306871C Serbia И 011 12 218 Radio type approvals for the tyre pressure monitors

Technical data.

Country

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 227 · Applies to: 453

Radio type approval number

Singa-

pore

Compliance with IDA Standard

DA- 103365

South

Africa

TA-2012/719

TA-2012/1540

TA-2011/1370

Installing two-way radios and mobile

phones

G WARNING

The electromagnetic radiation from two-

way radios can interfere with the vehicle

electronics if they are manipulated or

retrofitted incorrectly. This could jeop-

ardise the operating safety of the vehicle.

There is a risk of an accident.

You should have all work on electrical

and electronic components carried out at

a qualified specialist workshop.

G WARNING

If you operate two-way radios incorrectly

in the vehicle, their electromagnetic

radiation can interfere with the vehicle

electronics, for example if:

Rthe two-way radio is not connected to

an exterior aerial

Rthe exterior aerial is not correctly

mounted or is not low-reflection

This could jeopardise the operating

safety of the vehicle. There is a risk of an

accident.

Have the low-reflection exterior aerial

fitted at a qualified specialist workshop.

When operating two-way radios in the

vehicle, always connect them to the low-

reflection exterior aerial.

! Have the engine electronics and associ-

ated parts, such as control units, sensors,

actuating components or electric cables

serviced only at a qualified specialist

workshop. Vehicle components may oth-

erwise wear more quickly and the vehi-

cle's operating permit may be invalida-

ted.

! The operating permit may be invalida-

ted if the instructions for installation

and use of two-way radios are not

observed.

In particular, the following requirements

must be complied with:

Ronly approved wavebands may be used

Robserve the maximum permissible out-

put in these wavebands

Ronly approved aerial positions may be

used

Excessive levels of electromagnetic radia-

tion can cause damage to health. The use of

an exterior aerial takes into consideration

the scientific discussion surrounding the

possible health risk posed by electromag-

netic fields.

The following aerial positions may be used

for the correct installation of two-way

radios:

Front roof area ; Rear roof area i On vehicles with a folding top, fitting an aerial to the front roof area is not per- mitted. Use Technical Specification ISO/TS 21609 (Road Vehicles – "EMC guidelines for installation of aftermarket radio frequency transmitting equipment") when retrofitting two-way radios. Comply with the legal requirements for add-on parts. If your vehicle has fittings for two-way radio equipment, use the power supply and aerial connections intended for use in the basic wiring. Be sure to observe the manu- facturer's additional instructions during installation. Installing two-way radios and mobile phones 219

Technical data. Z

Deviations with respect to wavebands,

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 228 · Applies to: 453

maximum transmission outputs or aerial positions must be approved by smart. The maximum transmission output (PEAK) at the base of the aerial must not exceed the following values: Waveband Maximum transmission output Tetra 380 - 410 MHz 20 W Mobile communications generation 2G/3G/4G 6 W The following can be used in the vehicle without restrictions: Rtwo-way radios with a maximum trans- mission output of up to 100 mW Rmobile phones (2G/3G/4G) There are no restrictions when positioning the aerial on the outside of the vehicle for the following wavebands: Rtetra Rmobile communications (2G/3G/4G) 220 Installing two-way radios and mobile phones

Technical data.

Publication details

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 229 · Applies to: 453

Internet Further information about smart vehicles and about Daimler AG can be found on the following websites: http://www.smart.com http://www.daimler.com Editorial office You are welcome to forward any queries or suggestions you may have regarding this Owner's Manual to the technical documen- tation team at the following address: Daimler AG, HPC: CAC, Customer Service, 70546 Stuttgart, Germany ©Daimler AG: not to be reprinted, translated or otherwise reproduced, in whole or in part, without written permission from Daimler AG. Vehicle manufacturer Daimler AG Mercedesstraße 137 70327 Stuttgart Germany As at 27.06.2018

É4535847416%ËÍ

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 230 · Applies to: 453

4535847416 Order no. 6522 0315 02 Part no. 4535847416 Edition ÄJ2018-1b www.smart.com smart - A Daimler brand É999100659S*ËÍ 9 9 9 1 0 0 6 5 9 S A8

Other ManualsLib Projects

EQ_Forfour_453_2018_Owner_Manual_224p.pdf · p. 231 · Applies to: 453

www.manualslib.com www.manualslib.de www.manualslib.es www.manualslib.fr www.manualslib.nl www.manualslib.mx www.manualslib.tech 30+ Languages