youtube.com/smart_racer/this_small_led_upgrade_makes_the_smart_roadster_look_modern¶
2 excerpts.
Excerpt¶
youtube.com/smart_racer/this_small_led_upgrade_makes_the_smart_roadster_look_modern · p. 1 · Applies to: 450, 451, 452, 453, 454, #1, ebike
The way for removal. this side marker. Uh you can push it forward and it will get loose. Another way is to use plastic clip like this and you just go behind and push it toward yourself. New side marker. It's here. Here is comparison. You can see it's much smaller which is a good thing. Let's remove this one. So I will try now by pushing it forward. This one should go much [music] easier. But anyhow, do the favor to yourself and use this plastic. It's completely glued and [music] then it's falling apart. You can see the glue just around. Okay. Uhoh. Let's remove. Okay. So, you just unplug. This is T10 bulb. And now you plug new one. Just make sure this side is going to the forward of the car and this is going to the back. I will just connect before putting back in [music] place and I'm going to test it. [snorts] I have key with me also. I was thinking maybe something like this would be much better, more aesthetic, but at the end it would be disaster. Okay, let me try. It works fine. Okay. So, we put this back. First is going that side and then that's it. Okay. So, we are finished. I think it's great. I think it's same size. even smaller. But overall, I think on blue it's much better to have tinted one like this. Here you can see [music] how the old one looks. This was basically glued to the panel. Let's check from distance. If I take the key, I mean it's small, but at the end it's nice. I saw there is like upgrade from BMW. It's more looking uh like sharp one like this one. I tried to put that [snorts] one, but it's not working. And I don't know how it would look on the roadster. I don't know. I I don't like it, honestly. I think it's better like this. This is what is [music] left from the old one. They are going to garbage. This is how they look once placed. I [music] was thinking to put LED strip on this one just around and it would be much better. Excuse me. I have some issue. Okay, that was sticky overall. Not bad. Next thing to do is to change this rubber seal. You can see how it's cracked. [music] So, what I suggest you when you have to
Excerpt¶
youtube.com/smart_racer/this_small_led_upgrade_makes_the_smart_roadster_look_modern · p. 2 · Applies to: 450, 451, 452, 453, 454, #1, ebike
remove it, especially if you are about to remove this panel, don't pull it out. Just go slowly, little by little. Otherwise, you will end up like this. The link for site dynamic markers can be found down in description as well for the other parts that I use on smart roadster. Thank you for watching this video and until next one, drive [music] safe and have a good time. Bye.