evilution.co.uk/mod/accelerator-pedal.htm

1 excerpts.

Accelerator Pedal

evilution.co.uk/mod/accelerator-pedal.htm · p. 1 · Applies to: unknown

Mod Description Moritz G dismantled the accelerator pedal and measured the resistances should you need to double check yours. Mod Details Premium No Difficulty Mod ID 881 Credit Moritz G For Link https://evilution.co.uk/mod/accelerator-pedal.htm Copy to Clipboard The smart accelerator (gas) pedal is a “fly by wire” design, this means that it controls the throttle body electronically and not through the use of a bowden cable like older cars. It measures the position of the pedal comparing resistances over 2 pairs of tracks. The readings that he got were as follows. These are the 2 set resistances for the central tracks: Pad 1 to pad 5 = 1.22K Ohm Pad 2 to pad 4 = 1.23K Ohm These are the measurements for pedal when not pressed: Pad 1 to pad 6 = 825 Ohm Pad 2 to pad 3 = 800 Ohm These are the measurements for pedal when fully pressed: Pad 1 to pad 6 = 1.54K Ohm Pad 2 to pad 3 = 1.51K Ohm Yours won’t be exactly the same (probably) but your readings should be very close. Click if info helped 141 likes 49922 views Print