evilution.co.uk/mod/fitting-the-sound-chip.htm

1 excerpts.

Grundig Sound Upgrade

evilution.co.uk/mod/fitting-the-sound-chip.htm · p. 1 · Applies to: unknown

Mod Description The CD player already has the chip built in but the tape player has an extra unit that plugs into the top of the stereo. Mod Details Premium No Difficulty Mod ID 285 Credit Evilution Cost ££15 For Link https://evilution.co.uk/mod/fitting-the-sound-chip.htm Copy to Clipboard Tape Unit If you have the tape unit and plan to use it with a sound upgrade, you will need to install the sound upgrade chip. The chip splits the frequencies and allows settings to be saved. Remove the stereo, the info can be found here . Locate the cover on the top of the stereo, boxed in red below. Using a Torx10 bit… remove the cover. This is the smart sound upgrade chip. It slides straight into the stereo until it is flush with the top, the screw hole will line up. Refix the cover back over the top and screw it down. You will now need to activate the sound chip which can be found at the bottom here . How To Get A Sound Chip The smart part number is Q 0001300V001000000. However, after all this time, there is very little chance that you’ll be able to buy one from smart. Your only good option is to keep an eye on eBay, cross your fingers and make a wish. They are very rare. CD Radio Unit The CD stereo already comes with an integrated chip. Press and hold the music symbol button whilst turning the unit on. Continue to hold the music button until SOUND ON or OFF is displayed. Repeat to toggle the feature. Obviously you want ‘sound on’. Click if info helped 72 likes 69798 views Print