evilution.co.uk/mod/hashtag-wheel-arch-liner.htm

1 excerpts.

Hashtag Wheel Arch Liner

evilution.co.uk/mod/hashtag-wheel-arch-liner.htm · p. 1 · Applies to: unknown

Mod Details Premium No Difficulty Mod ID 1885 Credit evilution For Link https://evilution.co.uk/mod/hashtag-wheel-arch-liner.htm Copy to Clipboard Smart went a bit mad when they considered fixing the arch liners to the car. 19 of them! Here’s a quick overview. S = Torx25 Screw N = 10mm Plastic Nut C = Push Fit Clip. The circled areas front and rear are fixing up underneath that I’ll go into further detail on in a bit. Screws. Torx 25. Nuts. 10mm Plastic. Clips. Lever the middle out and pull the whole clip out of the hole. Underneath – Front 2x Torx 25 screws. Underneath Rear A Torx 25 screw and an 8mm hexagon headed bolt. Removing The Arch Liner You’d do yourself a favour by removing the front wheel and also pulling off the over arch trim will help a lot. The arch liner plastic is quite floppy so grab the back of the arch liner and pull it over the studs that the 2 nuts came off. You can now pull the liner from the top and out the wheel arch. It’s easy to do but hard to explain. Click if info helped 1 likes 6519 views Print